How do you replace the shear pin on a Toro snow thrower? Remove the ignition key. Tilt the snow blower back so it rests on it's handles. Usually, shear pins will fall off when they break, but if there is still some of the shear pin attached, remove the rest...
Do Tortoro snowblowers have shear pins?
Toro two-stage snowblowers do not use shear pins. The commercial-grade gear case makes the need for a shear pin unnecessary. If the auger hits an obstruction or is over-loaded with snow, the engine may shut off, so that you can remove the key, clear the obstruction safely with a stick and get back to work.
How do I replace the shear pin on my Auger?
To install the new shear pin, align the holes in the auger shaft with the holes in the gear shaft and insert the pin through those holes Re-install the nut and tighten it with a socket wrench, once the pin is tightened, be sure the auger shaft is secure
Can you change the oil in a Toro snowblower?
Any owner of a Toro Two-Stage Snowblower wants their machine to perform at a high level. That’s why knowing when and how to change the engine oil of your snow blower will help maintain its power, endurance, and dependability. Check out our tips for properly changing the engine oil of your Toro Two-Stage Snowblower.
Is it time to put your Toro snowblower to rest?
Once the winter is over, it’s time to finally put your Toro snowblower to rest. But before you put away your machine, there are plenty of things you can do to improve and maintain the maintenance of your snowblower, so it’s all ready to go next winter.
How do you replace a broken shear pin on a snowblower?
0:512:49How to Replace a Shear Pin on a Two-Stage Snowblower - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou'll need to use a punch and a hammer to remove that I'll just take the punch and insert itMoreYou'll need to use a punch and a hammer to remove that I'll just take the punch and insert it through the hole on the opposite side of the auger.
Do Toro snowblowers have shear pins?
Toro two-stage snowblowers do not use shear pins. The commercial-grade gear case makes the need for a shear pin unnecessary. If the auger hits an obstruction or is over-loaded with snow, the engine may shut off, so that you can remove the key, clear the obstruction safely with a stick and get back to work.
How do you change shear pins?
0:361:56How to replace a SHEAR PIN on a snow blower (EASY) - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure this holes lined up and you can usually do this by using just a screwdriver a smallMoreMake sure this holes lined up and you can usually do this by using just a screwdriver a small screwdriver.
How do you know if a shear pin is broken on a snowblower?
If you suspect a shear bolt is broken, stop the engine, remove the key, disconnect the spark plug wire and wait for all moving parts to stop. When it's safe, visually inspect the augers. If you don't see the shear pin head or nut and you can manually spin the auger along the auger shaft, you broke a shear pin.
How many shear pins does a snowblower have?
Cub Cadet 2 stage and 3 stage snow blowers come equipped with four to six shear pins depending on clearing width, one fastening each auger flight to the auger shaft. The pins allow the auger gear case to rotate the auger shaft and augers so they can collect snow and push it into the impeller.
Why is my Toro snowblower not throwing snow far?
If the blades get worn they will not effectively throw the snow. Visually inspect the blades for excessive wear and replace if needed. Inspect the belt to see if it is broken, stretched out, or out of place. If the cogged belt is broken or stretched out, replace it.
Are snowblower shear pins all the same?
There are three basic sizes of shear bolts, and it's important to select the correct one for your snowblower to ensure it fits and works correctly. Brass 1/4" shear bolts are most commonly used on smaller, entry-level snowblowers. Black 5/16" shear bolts are for larger mid-grade snowblowers.
Why does my snowblower keep breaking shear pins?
However, if the workload is too much for the augers to handle, a shear pin can break. A shear pin is a safety mechanism that is designed to break if the torque on the augers becomes too great. This way the auger's driveshaft won't break if you run over a curb, newspaper or hidden rock.
How tight should snowblower shear pins be?
Owners manual for my "mature" Snapper 824 calls for shear bolts to be torqued to 5-10 ft lbs... this puts them snug against tube that auger shaft runs thru. I've heard case for not snugging bolts thereby leaving some play for bolt to move up and down.
Why does my shear bolt keep breaking?
NO, The fact that the shear bolt is broken is an indication that the impeller or auger has impacted against something that the machine is not designed or capable of processing. The shear bolts are considered to be a sacrificial part to prevent greater damge from occuring to the gearbox or shafts of the unit.
What grade bolt should you use for a shear pin?
Normally shear bolts are Grade 2 and there is no soft grade #5 as it is either a grade #5 or not.
How do you remove impeller shear pins?
0:104:31DIY - How to replace snowblower impeller (auger) Shear Bolts (pins)YouTubeStart of suggested clipEnd of suggested clipAnd the auger will draw snow up into the Impella and I hit some ice and shared the bolts off so we'MoreAnd the auger will draw snow up into the Impella and I hit some ice and shared the bolts off so we're going to be replacing those.
Fuel Tips for Petrol Lawn Mowers and Snow Blowers
Wondering what type of petrol to put in your lawn mower or snow blower?
How to Assemble a Toro Single-Stage Snowblower
Just purchased your first Toro Single-Stage Snowblower? Now all you need to do to get your machine up and running is some minor assembly. Don’t sweat it if this sounds intimidating. After watching this quick and easy video tutorial, you’ll be using your fully assembled Toro Single-Stage Snowblower in no time!
How to Assemble a Toro Two-Stage Snowblower
Can’t wait to get started testing out your new Toro Two-Stage Snowblower? After some quick assemblage, you’ll be able to experience pristine performance, power, and durability, unparalleled to any other snowblower on the market.
How to Choose the Right Snowblower
No matter what your snow removal needs are, Toro has the lineup of snowblowers that will help you make the best purchase possible.
Tips to Starting Your Snowblower
Prevent snow blower starting problems by following these great tips before the snow starts to fall. Follow these steps to help guarantee your snow blower will start.
End of Snow Season Snowblower Tips
Once the winter is over, it’s time to finally put your Toro snowblower to rest. But before you put away your machine, there are plenty of things you can do to improve and maintain the maintenance of your snowblower, so it’s all ready to go next winter.
Snowblower Winter Checklist – Single-Stage
Prepare your Toro single-stage snow blower for the winter with these essential maintenance tips. In this video, we’ll review what signs of wear and tear to look out for on your rotor blades, proper oil changing and fuel requirements, and much more. Make sure you and your Toro snow blower will be ready for whatever this winter brings your way!
