How to Change a Jenn-Air Gas Cooktop Ignitor
- Turn off the gas.
- Unplug the cooktop.
- Lift off the burner grate.
- Lift off the burner cap.
- Remove the two screws that hold the burner base in place. ...
- Repeat Steps 3 through 5 with the other burner housed on the same side of the cooktop. Most Jenn-Air cooktop covers are in two to three sections.
- Lift the cooktop cover.
- Follow the igniter cable back to the ignition control module at the back of the cooktop.
- Unscrew and remove the cover on the ignition control module.
- Unplug the igniter cables. Lift the igniter assembly off of the cooktop.
- Install the new igniter assembly in the opposite manner. Plug the ceramic wires in first, then place the igniter assembly in place.
- Replace the igniter assembly's cover and its screws. Replace the cooktop cover. Replace the burner bases and screws.
- Plug the cooktop back in and reopen the gas line. Based in Houston, Texas, Meg Butler is a professional farmer, house flipper and landscaper.
How do I replace the igniter on my Jenn-Air cooktop?
Only use the igniter made for your Jenn-Air cooktop. Contact Jenn-Air or a certified Jenn-Air parts manufacturer. Provide your model number and they will be able to ship the igniter to you. Coat the threads of the screws with a high-temp lubricant. This will make them easier to remove the next time you have to complete this project.
How do you replace a Jenn Air Gas Cooktop?
But Jenn-Air recommends that consumers call a technician for replacement. Home repairs will not be covered under your gas cooktop's warranty. Turn off the gas. Unplug the cooktop. Lift off the burner grate. Lift off the burner cap. Remove the two screws that hold the burner base in place.
How to clean Jenn Air igniters?
I've had the same trouble with several brands including Jenn-Air igniters; sometimes brushing with a bit of solvent and a toothbrush helps soften the gunk - in particular we need to take care not to strip the threads on the brass burner nut or on the pot-metal burner. Otherwise you'll end up having to replace those parts too.
How do I replace the ignitor on my gas stove?
1. Replace ignitor lead or electrode. 2. Clean burner cap. Check that lead wire is not wet. Replace bad lead wire. 3. Tighten ground connection and correct any breaks in ground path from ignitor path to unit ground path. 4. Replace ignitor lead. 1. Shorted valve switch/harness 2. Switch has slipped off the valve 1. Replace switch/harness.
How do you change the igniter on a Jenn-Air gas cooktop?
First place the grate on top of the burner, then lift the burner and disconnect the wires. Next remove the two Phillips screws from the bottom of burner, pull igniter out of the burner and wiggle in the new one. Refer to the installation instructions provided by the manufacturer for more instructions.
How do I clean the igniter on my Jenn-Air gas stove?
Wipe the cooktop surface with a damp cloth. Use a separate damp cloth to gently clean the igniter. With a straightened pin or needle, unclog the ports on the burner base. Gently blot the igniter with a clean, dry paper towel before drying the cooktop.
How do you remove an igniter from a cooktop?
1:043:11How To: Whirlpool/KitchenAid/Maytag Top Burner Spark Igniter 74004053YouTubeStart of suggested clipEnd of suggested clipPlace the rubber strap around the burner head. So the igniter will be in a triangular openingMorePlace the rubber strap around the burner head. So the igniter will be in a triangular opening tighten it and then turn the wrench. Counterclockwise. Using the flat blade screwdriver remove.
Can Jenn-Air cooktops be repaired?
Sears Home Services will repair your Jenn-Air appliances no matter where you bought them! Whether it's your washer, dryer, refrigerator, dishwasher, range or oven, Sears Home Services will send qualified repair technicians to your home to repair and maintain your Jenn-Air appliances.
Why is my gas stove igniter not clicking?
The most likely reason why a stove no longer makes a clicking noise is due to a faulty spark module. Like most types of electric components, spark modules can burn out and stop working over time. When this happens, the module will no longer be able to create the spark necessary to ignite the gas.
Why isn't my gas stove clicking?
If one or more of the surface burners is not trying to light (not clicking), please check the following: Make sure the correct burner is selected. Match the burner to the correct switch. Verify that the burner knob was first turned to the Lite position.
How much does it cost to replace the igniter on a gas stove?
between $150 and $300The cost to replace your gas stove igniter is between $150 and $300. You might need a replacement if your stovetop won't stop clicking, the pilot light goes out or your burner won't light.
How do I know if my gas oven igniter is bad?
0:000:29Testing a faulty ignitor on your range or oven. Troubleshooting a gas odor.YouTubeStart of suggested clipEnd of suggested clipA faulty igniter can cause a poor air-to-fuel mixture. And create a gas smell while running the ovenMoreA faulty igniter can cause a poor air-to-fuel mixture. And create a gas smell while running the oven.
How do you replace the ignition switch on a gas stove?
1:455:05GE Gas Range/Stove Burner Won't light? Spark Ignition Switch - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen disconnect the wire connector to remove the old harness. You're now ready to install the newMoreThen disconnect the wire connector to remove the old harness. You're now ready to install the new spark igniter switch harness slide each switch on to its respective burner valve followed by the dust.
How do I identify my Jenn-Air range?
The model and serial numbers are located on the inside left frame of the door when opened, 10" from the bottom.
How do you change a Jenn-Air burner switch?
0:066:40Jenn-Air Cooktop Repair – How to replace the Infinite Switch - 240VYouTubeStart of suggested clipEnd of suggested clipYou've decided to change the infinite switch on your range it's a pretty easy job going to need aMoreYou've decided to change the infinite switch on your range it's a pretty easy job going to need a couple tools Phillips screwdriver and probably a pair of needlenose pliers.
Who owns Jenn-AIR?
Whirlpool CorporationMaytagJennAir/Parent organizations