Receiving Helpdesk

how do you replace the gasket on a nutribullet

by Dr. Sanford Koelpin V Published 3 years ago Updated 2 years ago

Part of a video titled Nutribullet Gasket Installation - YouTube
0:32
2:20
We're going to slip it over the blade. And then push it down into the ridge and it'll sit snug inMoreWe're going to slip it over the blade. And then push it down into the ridge and it'll sit snug in there after you've got it placed in there you're gonna take your fingers. Just start your pinky.

How do you clean the gasket on a NutriBullet?

The gasket ensures a tight seal on your blade. If this loosens, then you’ll have a leaky mess on your hands when you use your nutribullet. What is the best way to clean your blade and gasket? Wash your blades by hand with warm, soapy water and a dish brush to loosen any stuck-on debris.

Do you sell gaskets for the NutriBullet?

Each blade comes with a deep-seated gasket to ensure that it does not fall out. We do not sell replacement gaskets because gaskets are difficult to properly install and get stretched or damaged in the process. If you do find nutribullet gaskets for sale, do not buy them. They are counterfeit and not recommended for use with your nutribullet.

How do I know when to replace my NutriBullet?

Over time, if you start to notice that the sieve is looking dull, or is not working as efficiently as before, then it is likely due for a replacement. Always use genuine nutribullet ® replacement parts.

Are NutriBullet parts interchangeable?

Are nutribullet parts interchangeable? Each nutribullet has its own blade and cup that is designed to be used specifically for each model. Using the wrong parts and accessories can lead to increased wear and tear.

Does nutribullet have a rubber gasket?

The gasket ensures a tight seal on your blade. If this loosens, then you'll have a leaky mess on your hands when you use your nutribullet.

How do I fix a leaking nutribullet?

Try tightening the cup tighter to the base. If it continues to leak, you can easily slide off the rubber seal and replace it with a new one to create a new and lasting seal. If your Magic Bullet NutriBullet continues to leak, see the NutriBullet Leaks problem page for possible causes and solutions.

Why is my nutribullet leaking oil?

Most commonly, your nutribullet blender may be leaking a black liquid when the gasket that seals the blades is either spoilt or broken. Whenever this happens, the lubricating substance is able to squeeze through the broken seal and mix up with whatever it is you are blending in a black thick mixture.

Where does the rubber ring go in a blender?

Place the glass pitcher up-side-down on the counter. Now place a rubber 'O Ring' on the bottom rim of the glass pitcher (which is facing upwards, since the pitcher is up-side-down). Follow this by placing the metal piece with the blades on top of the 'O Ring' (so that the blades are inside the glass pitcher).

How do I stop my blender from leaking?

When fixing a worn-down gasket, you need to disassemble the housing from the blender jar (under the blade mechanism) and take out the rubber gasket. There will most likely be a leak in this rubber ring, and to fix it, you just need to buy another ring and replace the old one.

Why is my blender leaking black stuff?

Apparently, the tiny black flakes consist of the material located in the seal under the blades. As the blades turn, the rotating blade assembly allegedly causes friction when it rubs against the seal just under those blades. The seal is there to keep any liquid from leaking out of the container.

Why does my NutriBullet smell like burning?

When it gets close to the minute mark, it can start smelling like rubber burning on tires, turn it off!” Never blend hot items in the NutriBullet. It may work in other blenders, but this machine is not designed to handle warm or hot liquids. Don't fill it over 2/3 full.

How long does a NutriBullet last?

Nutribullet blenders are guaranteed for 1 year of performance. However, your Nutribullet can last well over 5 years given appropriate use and care. Keep reading, and we'll tell you how to properly handle your Nutribullet to keep it blending like new for years to come.

How do you take apart a NutriBullet?

Step 1 Magic Bullet NutriBullet Pro DisassemblyTo start the disassembly of the Magic Bullet NutriBullet Pro you will begin from the bottom.Flip the device over to the bottom.Unscrew the four 1 cm screws using #2 Phillips Head Screwdriver.Remove the loose bottom portion of the device by pulling up from the bottom.

Why does my bullet blender leak?

If the NutriBullet's lid is not tightly screwed onto the blender's base with the extractor blades, the blender can leak. Check to see that the extractor blade is screwed onto the cup lid properly by using the ridges on the blender cup as a guide.

How do you place rubber in blender?

Where Should You Put It?Start by placing the glass pitcher of the blender upside-down on the counter.You should be able to place the rubber ring at the bottom side of the glass pitcher.As soon as you place the rubber ring, make sure to place the metal piece along with the blades on the top of the rubber ring.More items...•

Why are gaskets needed?

A gasket stores energy, like a spring, and seals two mating surfaces that fail to perfectly meet. Wikipedia: “Fills the space between two objects, generally to prevent leakage between the two objects while under compression.

Introduction

Did your device leak liquid? Do it seem to not seal as well as before? Replace the gasket to create a new seal and prevent leaking from your cup.

Step 2

Using tweezers, grab the gasket at the indented lip which is located on the side of the blending blade.

Introduction

This guide will demonstrate how to replace a damaged rubber gasket on the blender blade lid of your cup. The rubber gasket is responsible for sealing the cup from leaking. Other possible problems can be found in our Troubleshooting Guide.

Step 2

Use tweezers to peel back the rubber gasket that surrounds the inner ring of the lid.

Team

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

How to clean nutribullet?

Simply place the cup and lid on the top rack of the dishwasher or hand wash with warm, soapy water and rinse. Gently rinse the blade assembly and carefully clean with a damp sponge or cloth.

Why is my Nutribullet Juicer not turning on?

If your nutribullet Juicer™ is not turning on after a period of heavy use, it’ s likely that the unit has overheated. Your machine is programmed to temporarily shut down as a protective measure when it senses overuse. If or when this occurs, unplug the unit and allow it to cool for at least 15 minutes before plugging it back in and attempting to use again. Do not touch or hold the Juicer if the unit is hot to the touch.

Why is my Kitchen Express not turning on?

If your magic bullet Kitchen Express™ is not turning on after a period of heavy use, it’s likely that it has overheated. Your machine is programmed to temporarily shut down as a protective measure when it senses overuse. If/when this occurs, unplug the unit and allow it to cool for at least 15 minutes before plugging back in and attempting to use again.

How long can you use a sealed coffee cup?

Never continuously operate with a sealed cup for longer than one-minute. The longer your blend cycle is on, the longer pressure builds inside the cup. If your blending cup becomes warm to the touch, allow the cup to cool completely before carefully opening.

Why isn't my Magic Bullet Kitchen Express turning on?

If your magic bullet Kitchen Express™ is not turning on, it is likely that it is either assembled improperly, or that it has overheated. If using the work bowl, make sure the lid is properly attached and locked in place by matching the lid lock icon to the silver arrow on the work bowl handle. Once the lid is secured, set the bowl on the power base and gently twist clockwise to lock into place. If using the cup, make sure the blade is securely fastened to the cup before locking the blade into the power base using the same gentle clockwise twist.

Can you mix soda in a nutribullet?

Hot ingredients like coffee or carbonated ingredients like soda should never be blended in the NutriBullet (with the exception of the vented pitchers of the NutriBullet Blender and the NutriBullet Blender Combo). The ingredients can build up pressure and cause damage to the components and even cause injury.

Can you take a nutribullet in your luggage?

Yes. As the nutribullet® GO features a lithium- ion battery and contains blades, we recommend that you pack your nutribullet® GO, with the cup or lid securely attached, in your checked luggage without any liquid inside.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9