How do you replace a shower drain in a mobile home? Beneath the tub, locate the drain trap secured by a nut. Loosen the trap nut and move the trap and drain pipes out of the way to make room for the new tub drain. Move to the top side of the tub. Roll out an even bead of plumber's putty and position it around the new drain fitting.
- Remove the Original Drain Fitting. Use a tub drain wrench to unscrew the drain fitting counterclockwise, levering the wrench against the crosshairs inside the drain fitting. ...
- Prepare the New Drain Fitting. ...
- Insert the New Fitting. ...
- Secure the New Fitting. ...
- Install Other Drain Pieces. ...
- Check Your Work.
How to remove a shower drain in a mobile home?
Part 2 Part 2 of 3: Unscrewing and Loosening the Drain
- Check the shower drain for screws. Some shower drains are attached with screws while others are tightened in without them.
- Insert 2 nose pliers into the drain openings. Hold a pair of nose pliers in each hand—you will need two separate sets to remove the drain.
- Grab the plier handles firmly with both hands. ...
How to replace shower faucets in a mobile home?
- Cut water off.
- Remove access panel.
- Unhook water lines and lock nuts from faucet stems.
- Go back in bathroom - pull the faucet out.
- Put the new faucet in.
- Go back to access panel side - Hold the faucet from the back, put each lock nut on.
How to change tub drain in mobile home?
Manufactured Home Standard Bath Tub Drain
- Fits 2" drain hole in bottom of tub
- Includes locknut and coupling nut
- Rubber stopper
How to build a shower in a mobile home?
Steps to Build the Shower
- Measure and clean the place. Start with measuring the place where you want to install your new shower pan. ...
- Install drainer and shower step/beam. After deciding which type of drain for a shower you want to use, you should start paying attention to the details.
- Fill in the dry pan mixture. ...
- Lay of shower pan material. ...
- Make the floor smooth and flat. ...
How do you remove a shower drain from a trailer?
1:3510:00HOW TO REPLACE DRAIN ASSEMBLY ON FIBERGLASS ...YouTubeStart of suggested clipEnd of suggested clipIt's holding water we may end up having to cut that for me the top of the bottom to get that thingMoreIt's holding water we may end up having to cut that for me the top of the bottom to get that thing to drop out. Probably from the top. Here's some water coming out of here that's for sure.
What size is a mobile home shower drain?
Mobile Home Shower Drain A bathtub drain is generally smaller, so you want to find a drain with strainer that fits the mobile home 32"x32" shower stall or 54"x27" shower you have in your bath.
How do you remove a shower drain from a fiberglass shower?
1:353:33How to Remove Fiberglass Shower Pan Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll right so once we've drilled it down I just used a vacuum cleaner to suck up around it. So I canMoreAll right so once we've drilled it down I just used a vacuum cleaner to suck up around it. So I can then remove the rag.
How do you remove an old shower drain?
2:405:46How to Remove a Stuck Shower Drain A Quick and Easy SolutionYouTubeStart of suggested clipEnd of suggested clipPipe you can pull up the entire unit you could try to wiggle. At that gasket out with a needle noseMorePipe you can pull up the entire unit you could try to wiggle. At that gasket out with a needle nose pliers. And a flat head screwdriver.
How do you replace a walk in shower drain?
0:302:36How to Install a Shower Drain with One Person - YouTubeYouTubeStart of suggested clipEnd of suggested clipInsert drain through the shower pan floor. And over your two-inch drain pipe. This may requireMoreInsert drain through the shower pan floor. And over your two-inch drain pipe. This may require tilting the flange slightly. And holding it in the keeper's.
How do you replace a shower drain from the top?
1:253:47WingTite - Fix Leaking Shower Drain - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith the drain body and flange cut use the flat blade screwdriver to pry the 1-inch. Piece up andMoreWith the drain body and flange cut use the flat blade screwdriver to pry the 1-inch. Piece up and out breaking it free from the shower pan squeeze.
How do you remove a shower drain without screws?
0:042:41How to remove a shower drain cover / cap that doesn't have screws ...YouTubeStart of suggested clipEnd of suggested clipIf you have a shower with a drain like this and you need to remove it. And you look and there's noMoreIf you have a shower with a drain like this and you need to remove it. And you look and there's no screws anywhere. So you wonder how do i get this out. So you could sit here and try to turn it it's
How do you remove a drain from a fiberglass tub?
How to Remove the Drain From a Fiberglass BathtubLay down a few bathmats in the fiberglass tub, so boots and tools do not scratch, gouge or otherwise damage it.Remove the original drain assembly. ... Unscrew the drain basket. ... Unscrew the overflow plate from the side of the tub and pull it out.
What are the different types of shower drains?
There are more shower drains available than you can count, but they all really fall into two types – point drains and linear drains. Point drains are most common and are what we are used to seeing in showers.
How do you install a shower drain pipe?
2:596:44How to Install Shower Drain Pipe Part 2 - YouTubeYouTubeStart of suggested clipEnd of suggested clipChanges as the pipe size goes bigger meaning on 4-inch pipe you go the pipe stick in about an inchMoreChanges as the pipe size goes bigger meaning on 4-inch pipe you go the pipe stick in about an inch and 7/8 into the fittings. But for 2-inch pipe it's 3/4 of an inch and here's how you measurement.
Use a special drain assembly to quickly and easily install a new drain from the top
Replace a shower drain without tearing open the ceiling below. Use a special drain assembly and install it from the top.
Shower Drain Installation: How to replace a shower drain from the top
An old drain might leak from bad gaskets or cracked joints. Stains will show up on any finished ceiling below.
Remove Shower Drain Cover
The toughest part is removing the old drain flange. You’ll probably have to cut it with a hacksaw blade and pry it loose in sections from the shower pan. Leave the existing drainpipe intact. The WingTite Drain simply slips over the drainpipe and an O-ring seals it.
Required Tools for this shower drain installation Project
Have the necessary tools for this DIY shower drain installation project lined up before you start—you’ll save time and frustration.
How to stop a faucet from falling in a tub?
To prevent the faucet from falling into the tub and potentially chipping it, lay a thick blanket or towel in the tub before removing the faucet. However, faucets that have been in place for years might need a gentle tap with a mallet to pull free.
Where is the shut off valve located?
The shutoff valve is often located behind the access panel , but you can also turn off your home's main water valve. Open the bathtub taps to ensure the water has been turned off and drain any water remaining in the pipes. Next, use a wrench to loosen the nuts that attach the water supply lines and the shower line to the faucet stems.
Where are the lock nuts on a bathtub faucet?
All bathtub faucets fasten in place with lock nuts located on the other side of the tub. The only way to reach these nuts — and the water lines leading to the faucet — is through an access panel, assuming one exists. In your mobile home, go into the room or closet directly behind the bathtub and look for a panel on the wall.
Can you replace a shower faucet in a mobile home?
This makes it a little bit easier and faster to replace shower faucets in a mobile home than in a traditional home. The only tool you'll need is an adjustable wrench.
Why is it important to know what drain pipes are made of?
Having a working knowledge of your drain pipe’s manufacturing is helpful as it will give you a better idea of how to fix issues and diagnose pain points in your plumbing if they arise.
How does ventilation work?
Ventilation pipes work with drain pipes to create neutral air pressure. Gravity then carries the water and sewage through the drain pipes. Poor ventilation is the source of many issues which we will talk about later.
What is the best material for mobile home drain pipes?
While drain pipes will differ depending on the mobile home, there’s a good chance they’re made from either of these two materials: PVC or copper. P VC, or polyvinyl chloride, is a plastic material often used in the replacement of metal pipes.
What is PVC used for in mobile home?
It’s also lightweight and can handle intense water pressure. In addition to drain systems , PVC can be used in a mobile home’s vent system. PVC commonly comes in a white or dark grey color.
What is a P trap?
The “P-trap” essentially prevents clogs and the release of dangerous gases in your home. Drain pipes require proper air flow to accomplish its job. Your home’s ventilation pipes supply this. You can think of ventilation pipes as the lungs or heart of your plumbing system. Ventilation pipes work with drain pipes to create neutral air pressure.
What is the purpose of a mobile home drain?
Drain pipes are one of the three main elements of your mobile home’s plumbing system. They are responsible for safely removing waste and sewage. Your mobile home drain system also helps prevent dangerous gases and fumes from building up and potentially releasing themselves into the home.
What is the difference between a mobile home and a stick built home?
Plumbing in a mobile home differs from stick-built as the pipes run under the floors, not inside the walls. Having pipes under the home offers both benefits and drawbacks. One benefit of mobile home plumbing is that your pipes are easily accessible. This makes it easier for you to make replacements, adjustments or repairs on your pipes.
How to drain a tub faster?
Whenever possible, use trap and pipe pieces that are all the same diameter to help the tub drain faster. Finally, tighten the trap nut. Have a helper fill up the tub and drain it while you watch for leaks from below.
How do I unscrew a tub drain?
Use a tub drain wrench (sometimes called a Dumbell wrench) to unscrew the drain fitting counterclockwise, levering the wrench against the crosshairs inside the drain fitting. If the fitting is stuck or the crosshairs break, cut the fitting with a mini hacksaw or a hacksaw blade. Cut through the threads and the rim of the fitting but not deep enough to go into the tub itself. Make a second cut about a 1/2 inch away from the first cut. Pry out the cut segment with a flat screwdriver, then use the screwdriver to pry up one of the edges of the drain fitting and unscrew it counterclockwise.
Why is 1 1/2 inch tubular pipe not draining?
However, one potential problem with using 1 1/2-inch tubular pipe is that the tub will not drain quite as fast because it is a smaller pipe. The drain also needs to be in an accessible location, since these are mechanical joints that can leak more easily than glued joints.
Can you replace a bathtub drain in a mobile home?
Replacing an old, leaky or damaged bathtub drain in a mobile or manufactured home can be different from a tub drain in a standard site-built home. Mobile homes often have "garden" style tubs that do not have an overflow tube, and the drain includes just a seal and nut that you tighten onto the tub itself. In a standard home, the drain assembly is ...
What happens if the shower pan is not level?
If the shower pan is not level, the shower will not drain properly. You may find that you have standing water in your shower. Use the wooden shims to level the shower pan. Follow the manufacturer’s instructions on attaching the shower pan to the subflooring.
How are shower surrounds made?
Acrylic shower surrounds are made by vacuum stretching large sheets of heated acrylic in molds. Usually, acrylic surrounds are reinforced with glass fibers and resin after the acrylic sheets get formed.
What to do if the drain doesn't line up with the shower pan?
The drain is of particular importance. If the drain doesn’t line up with the shower pan’s opening, you must move the drain line and replace the subflooring. In most instances, this is a job best left to a professional licensed plumber.
Can you make a mistake installing a shower surround?
These openings usually involve the control valve and the showerhead opening. Measure carefully. A mistake now could ruin your new shower surround.
Can you install a shower pan with a surround?
Once the shower pan is in place, you can turn your attention to the surround for your new shower. Most mobile homeowners opt to install a shower surround kit. Before you go further with your project, consult the manufacturer’s instructions. You should follow these instructions exactly when installing the surround.
Can you replace a shower pan in a mobile home?
Replacing a shower stall or shower pan in a mobile home bathroom requires some preparation and planning. Any damaged flooring or plumbing must be repaired or replaced before the installation. You must install the shower pan plumb and level to ensure proper drainage.
Is it better to have all materials and tools gathered before you start a project?
It is always better to have all your materials and tools gathered before you start a project. Having everything on hand can ease frustrations and make the project go faster. If everything is on hand, you will have fewer interruptions and delays. We suggest that you have the following ready to install your new shower stall or shower pan.
What is a shower drain grated cover?
This guide mainly focuses on a simple shower drain grated cover. This is type which is a flat metal piece that lays flat over the drain cover. This specific cover is held into place by two to four screws.
What is the best way to clean a drain?
To clean your drain with baking soda and vinegar follow these steps. Liberally sprinkle baking soda down into and around the drain area.
How to get foam out of drain?
Pour pure white vinegar over the baking soda, down into the drain and around the opening. Quickly drop a washcloth over the drain to force the foaming to travel down instead of up. Let the cleaner work for fifteen minutes. Remove the washcloth and use it to wipe around the drain area.
What to use to cover up a drain grate?
The resealable bag or plastic tray is to hold the small screws and drain cover, so nothing slips and falls down the open drain. You will want to have a folded washcloth to cover up the drain grate while you are removing or replace screws.
How many screws are needed to remove a bathtub drain cover?
This specific cover is held into place by two to four screws. Some bathtub drain covers are classified as screw on covers, which you can easily turn to remove. There are also some types that require you to lift and loosen screws hidden below the drain cover.
Why do showers rust?
Rust can happen in even some of the cleanest showers. This is because rust develops when water is left sitting around metal.
Can you keep a shower drain clean?
This way you can keep your shower drain clean and free from possible buildup. Depending on your bathroom floor surface, you might or might not have to be overly careful during this process. If you have tile flooring in your bathroom, then it won’t really matter if you get it wet with dirt and debris.
