- Look beneath the sink and behind the drain to find the pivot rod. ...
- Unscrew the retaining nut that holds the pivot rod inside the drain. Slide the nut and washer onto the original pivot rod.
- Pull the pivot rod out of the drain. Squeeze the spring clip holding the pivot rod to the clevis with your thumb and forefinger.
- Slide the retaining nut and washer off the original pivot rod. Wipe the retaining nut and washer with a rag to clean any debris off these items.
- Thread the washer and retaining nut onto a new pivot rod. ...
- Insert the pivot rod and pivot rod ball into the drain. Make sure the tip of the rod threads through the opening in the drain plug’s tail piece.
- Slide the washer and nut against the threads in the drain. Hand-tighten the retaining nut onto the drain to hold the pivot rod in the drain.
- Squeeze the two sides of the clip together that held the original pivot rod to the clevis. ...
- Test the placement of the pivot rod by pulling up on the stopper lever. ...
- Look beneath the sink and behind the drain to find the pivot rod. ...
- Unscrew the retaining nut that holds the pivot rod inside the drain. ...
- Pull the pivot rod out of the drain. ...
- Slide the retaining nut and washer off the original pivot rod.
How do you replace a pivot ball on a horizontal rod?
Thread a new pivot ball onto the end of a new horizontal rod. Use replacement parts from a kit, which typically includes everything you need except a new gasket (available separately in a plumbing supply or hardware store). Match the pivot ball size to the old pivot ball before purchasing to ensure it will fit precisely.
How do you replace a pivot rod in a sink?
A retaining nut and washer holds the pivot rod and pivot rod ball in the drain, and a clevis screw connects the rod to the stopper lever. Unscrew the retaining nut that holds the pivot rod inside the drain. Slide the nut and washer onto the original pivot rod.
How do you remove a pivot rod from a washing machine?
Pull the pivot rod out of the drain. Squeeze the spring clip holding the pivot rod to the clevis with your thumb and forefinger. This releases the tension on the clip and allows you to slide the rod out of the clip and the clevis. Slide the retaining nut and washer off the original pivot rod.
How do you tighten a pivot rod drain pipe?
Line up the ball-end of the horizontal pivot rod with the pipe opening. Push the ball into the hole, center the gasket, then tighten the nut. Again, hand tighten the nut only. Test the assembly by pulling up and pushing down on the drain rod before replacing items and cleaning up the mess.
How do you reattach a pivot rod?
2:534:58How to repair or reassemble pop-up sink stopper DIY video ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe need to do is. We just want to make sure that we get get the pivot rod in the lift there so thatMoreWe need to do is. We just want to make sure that we get get the pivot rod in the lift there so that it will open and close the stopper. Correctly. Play with it make sure it's a good match.
How do you replace a broken sink pivot rod?
0:442:49HOW to FIX a Broken Sink DRAIN STOPPER Rod - YouTubeYouTubeStart of suggested clipEnd of suggested clipBecause the rod has to go through it. So i'm just gonna put it straight down like that you need to iMoreBecause the rod has to go through it. So i'm just gonna put it straight down like that you need to i'm going to insert this first.
How do I remove a pivot rod?
How to Replace a Pivot Rod Under a SinkLook beneath the sink and behind the drain to find the pivot rod. ... Unscrew the retaining nut that holds the pivot rod inside the drain. ... Pull the pivot rod out of the drain. ... Slide the retaining nut and washer off the original pivot rod.More items...
Why is my pivot rod leaking?
Leaking can start if there is loosening or cracking of the compression nut that holds the pivot rod in the drain pipe. If a leak is traced to this nut, it can usually be stopped by tightening the nut. A cracked compression nut should be replaced with a new nut.
How do you fix a sink lift rod?
0:143:02How to Re connect the Lift Rod to a Faucet Drain Stopper - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis metal piece of the holes in it and sometimes this this bolt can come loose. So if that comesMoreThis metal piece of the holes in it and sometimes this this bolt can come loose. So if that comes loose it's just a matter of getting some pliers and tightening it back down to the rod.
What is a pivot rod?
A sink pivot rod, also known as the ball or horizontal rod, is that part of a pop-up assembly that transfers vertical motion to the stopper when you move the lift rod up or down. Fixing a broken pivot rod isn't that hard, but you do have to work in tight quarters.
How do you install a Moen pivot rod?
5:127:32Bathroom Faucet and Drain Kit Installation - Moen Eva - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe end of the pivot rod into one hole then catch the designated hole in the strap. And slide theMoreThe end of the pivot rod into one hole then catch the designated hole in the strap. And slide the rest of the way through the second hole in the clip. The end product should look like this.
How do you remove the pivot nut from a sink?
1:374:27Remove Bathroom Pop Up Stopper Unclog Sink - YouTubeYouTubeStart of suggested clipEnd of suggested clipTurn the pivot rod nut counter clockwise. If it's a plastic one. You should be able to do this by.MoreTurn the pivot rod nut counter clockwise. If it's a plastic one. You should be able to do this by. Hand. And remove the pivot rod be careful when you take this apart.
How do you replace a pop-up bathroom sink assembly?
0:293:31How to Replace Your Bathroom Sink Pop-Up Assembly - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you can see exactly what needs to be done lift strap pivot rod and spring clip remove the pop-upMoreSo you can see exactly what needs to be done lift strap pivot rod and spring clip remove the pop-up plug loosen the slip nut that fastens a tail piece to the p-trap.
Why is my bathroom sink leaking underneath?
Leaks in a bathroom sink are frequently caused by clogged water supply lines, faulty p-traps, or poor sink drain pipe connections. Other reasons for bathroom sink leaks include blocked water supply pipes, incorrect p-traps, and poor sink drain connections; so double-check these areas.
How do you stop popping wastes from leaking?
0:342:07Fix That Leaking Pop Up Waste Easy - YouTubeYouTubeStart of suggested clipEnd of suggested clipOkay what happens is this can become loose. Okay so it would be a case of all you need to do isMoreOkay what happens is this can become loose. Okay so it would be a case of all you need to do is tighten this up hand tight. Okay that's it it's just hand tight okay and then retest.
Why does my bathroom sink not hold water?
If your sink won't hold water, chances are the stopper isn't seating securely over the drain hole, or there could be leakage due to a bad stopper gasket. If the sink won't drain quickly, the stopper either isn't opening far enough or the drain is partially clogged.