how do you repair trex decking

^{How do you repair Trex decking?}

• Remove any stains with a scrub brush and cleaning solution recommended by the manufacturer.
• Tighten or replace any decking screws or nails that have worked loose over time with a power screwdriver and hammer.
• Sand any small scratches or gouges in the boards with a fine-grade sandpaper.

How to repair deep scratches on Trex deck?

Here are a few ways to keep scratches at bay and maintain your deck:

• Use a woven rug designed for high-traffic spaces. A woven rug will help keep foot traffic from shoes from doing damage. ...
• Place pads under pieces of furniture that live on your deck. ...
• Put furniture away when it’s not in use. ...
• Use a broom instead of a shovel to clear leaves, snow or other debris. ...

What is the recommended joist spacing for Trex decking?

What Is Frame Spacing for Trex Decking?

• Significance. Trex and other composite decking brands are considerably heavier and more flexible than wooden surface boards.
• Building New. When designing a new trex or composite deck, the spacing between floor joists should be 12 inches on center.
• Replacing Old. Wooden decks will have a frame spacing measurement of either 24 or 16 inches. ...

How to clean your TimberTech deck?

To prepare your traditional wood deck before the winter season:

• Remove any mold and mildew with chemical cleaners.
• Use a power washer or hose to rinse the deck thoroughly.
• Let dry for 24 to 48 hours.
• Re-stain and re-seal (be aware that stains and seals often release volatile organic compounds, or VOCs, and other harmful chemicals into the air, so use with care).

How to repair Trex deck?

Method 1 Method 1 of 2: Fixing Scratches, Splits, or Chips Download Article

1. Purchase a repair kit if you want to easily fix your deck. ...
2. Sand the scratch with a scratch repair pad or applicator tool. ...
3. Apply wax to the damaged area until it is level. Take off the tip of the wax stick, and rub it over the sanded area.
4. Rub the applicator over the wax to remove any excess. ...

Can composite decking be repaired?

If the boards on your composite deck have chips or small cracks, you may be able to repair them by using a composite deck repair kit -- depending on the materials and the manufacturer of your deck's boards.

Can you fill holes in Trex decking?

Fill small holes, using a putty knife, with a mixture of fine composite board shavings and silicone caulk. The consistency of the mixture should be thick enough that it will not seep out of the bottom of the hole. Match the color of the caulk to the deck boards.

How do you repair a composite deck?

7:4510:34How to install a composite deck with Wickes - YouTubeYouTubeStart of suggested clipEnd of suggested clipAlways use screws that are specifically designed for the job and make sure that all screws areMoreAlways use screws that are specifically designed for the job and make sure that all screws are secure. But not over tightened. Work your way down the board fixing the deck board to each support joist.

Can Trex be restored?

Combine half a cup of apple cider or white wine vinegar with a gallon of water and a cup of baking soda — this is the cleaning solution recommended by Trex for its decking boards.Aug 23, 2021

Can Trex decking be repaired?

If you notice a scratch or damaged area on your Trex decking, fret not! If you have a small scratch or chip, use a composite deck repair kit. If you have a larger scratch, dent, or dings, it is best to replace the entire board. With a few tools, you can easily repair your deck and enjoy your patio.May 8, 2020

How do you cover screw holes in composite decking?

For plastic or composite decking, use an epoxy filler to fill screw holes. Mix the epoxy with thinner and use a syringe to fill the holes. Allow the epoxy to dry, then sand it so that it is flush with the deck. Wear a mask while sanding because the epoxy dust is dangerous to breathe in.

How do you fill Trex screw holes?

1:014:49Deck-Porch install - Plugging Screw Holes - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I used a stainless steel screw that is kind of sunk into the board and also I use a plug which IMoreSo I used a stainless steel screw that is kind of sunk into the board and also I use a plug which I cut out of some of the scraps I had and I've glued a plug in there with polyurethane glue.

How do you restore an old Trex deck?

You can perform a semiannual cleaning on your composite deck to preserve its longevity.Step 1: Pre-spray your deck. ... Step 2: Spray with soapy water & scrub. ... Step 3: Rinse thoroughly. ... Step 1: Pre-rinse. ... Step 2: Mix up your vinegar solution. ... Step 3: Sprinkle baking soda. ... Step 4: Rinse thoroughly.More items...

How long does a Trex deck last?

between 25 and 30 yearsComposite decking requires minimal upkeep and can last between 25 and 30 years. On average, plastic decking has a similar lifespan to composite decking and can last nearly 30 years.

Can you pressure wash Trex?

Trex does not recommend the use of a pressure washer. The use of a pressure washer on deck surface could damage the decking surface and will void the warranty with respect to any condition caused by the pressure washing.

What to use to remove tannins from deck?

If you clear the debris from your deck and notice tannin bleeds have caused discoloration, you can use a deck brightener to remove the stains. These deck brighteners contain oxalic acid, which removes tannins. Just ensure your deck is dry before applying.

How much pressure should I use to pressure wash composite decking?

If you pressure wash your deck, keep it on the lowest setting possible—no more than 3100 psi with a fan tip. Composite decking is much softer than natural wood. A pressure washing at too high a setting can encourage chipping, sun damage, and mold staining. Be sure to spray no closer than 8 inches away from the wood.

Can you use soapy water on Trex decking?

When cleaning your decking, be sure to use the correct cleaner when making your soapy water. Otherwise, you could cause surface damage that affects the appearance of your Trex deck. Composite decking such as Trex decking is porous and needs an oxygenated cleaner that can clean inside the deck and the surface.

Does composite decking need to be cleaned?

While composite decking requires less maintenance than other deck materials, it still requires cleaning to keep it looking fresh, especially after heavy snowfall or storms. Leftover debris can leave behind dirt, mud, and mold if not cleaned up properly.

Is Trex decking hardy?

Trex is an industry leader in hardy composite decking, which requires less daily maintenance than organic lumber decks. However, if your Trex decking has been through a few seasons already, it may be due for some basic care and restoration to get it back to full health. In this guide, we’ll go through the best basic practices for how ...

Does Trex decking need maintenance?

A deck transforms any outdoor space into a great year-round spot for gatherings and parties with friends or family. However, once you’ve installed your perfect decking, it does require some maintenance to keep it in tip-top condition. Trex is an industry leader in hardy composite decking, which requires less daily maintenance than organic lumber ...

Can you dry water off a deck?

Generally, hard water is something to avoid. If there is no other option, you can dry the water from the decking using a dry cloth. If there are already spots on the decking caused by hard water, you can remove them using white vinegar as a cleaning solution.

How often should I redo a deck stain?

A standard deck stain might need to be redone each year, he said. Whichever paint or stain you pick, clean the deck thoroughly first.

Do you need to primer a deck before painting?

Before you paint or stain, check to make sure the decking isn’t one of the capped styles.

Can you use a deck cleaner on non-capped decking?

Whichever paint or stain you pick, clean the deck thoroughly first. Use a deck cleaner that doesn’t have a warning on the label against use on non-capped composite decking, because some cleaners for capped decks are too harsh for original-style composite decking.

Can you use a pressure washer on composite decking?

Do not use a pressure washer on non-capped composite decks. Rinse thoroughly with a hose, and let the decking dry. Apply the paint or stain when the boards are not in direct sunlight, which would cause the coating to dry too fast.

Can you paint composite decking?

Painting or staining vintage composite decking isn’t necessary to make the material last longer, but it can give the deck a new look — changing the color, eliminating stains from mildew or leaves, and evening out the color on decks where rugs or planters kept sunlight from reaching some areas.

Do you need to seal a composite deck?

Your composit e de ck won’t ever need to be sealed or painted because it is very durable and made to stand up to regular abuse. Pesky scratches can mar a great outdoor space though. Here are some methods you can use to fix scratches on your composite deck:

Does composite decking fade?

This is particularly true if you’re using the heat method. With composite decking, a change in seasons may help eliminate your scratch or make it much less visible over time. As your deck ages, the scratch may simply blend in much better with the natural fade of any exterior material.

Can composite decking be scratched?

Composite decking is designed to be durable and stand up to any test mother nature can come up with. The reality is that even the best composite decking materials can end up scratched. As your deck ages, you’re more and more likely to see scratches simply from standard wear and tear as well. The good news is that your deck likely isn’t damaged ...

Can you repair a scratch on a composite deck?

Composite decking scratch repair is certainly possible even if you don’t have true handyman skills. Once your deck is properly fixed, there are steps you can take to avoid scratches in the future. Here are a few ways to keep scratches at bay and maintain your deck: Use a woven rug designed for high-traffic spaces.

Is composite decking strong?

Composite decking material is very strong and resilient, but issues can arise in some cases. Your decking manufacturer or retailer may be able to recommend a repair method that works well for their unique material formulation. They can also provide cleaning, care and maintenance tips in many cases.

Is composite decking good for outdoor use?

They’re also relatively easy to repair when scratches do occur. That makes composite material an excellent choice for any outdoor space.

How to Clean Dirt & Debris

Your deck is bound to get a little dirty from everyday substances like dirt and debris; that’s the nature of being outside. But in most cases, you can clean your deck in two simple steps:

Spills, Stains, and Mold

Trex is stain and mold-resistant, so even the best of us can slack on cleaning our decks sometimes. But waiting too long can lead to staining and mold growth from leftover food, drinks, dirt, pollen, etc.

Snow & Ice

If you’re blessed (or cursed) to live somewhere that experiences cold winters, you’ll have to deal with ice and snow. You likely plan on using your deck in the winter, or at the very least, you’ll want to create a path to your backyard or grill.

Additional Questions About Trex Care

Keeping your deck clean from dirt and grime buildup is the best way to keep it looking new. And it’s also the solution when it’s starting to look worn.

Caring for PT Wood Framing

For pressure-treated (PT) wood framing, there’s nothing more you need to do! PT lumber is already resistant to mold, rot, and pests.

Conclusion

Thanks to its durability and low maintenance, cleaning and caring for your Trex deck is an incredibly simple process. In most cases, a hose, warm soapy water, and a scrub brush are all you need!

How long does it take for Trex to clean grease off of deck?

Don’t rely on semi-annual cleanings to remove grease stains from your Trex decking. If you ever spill grease, oil or food on your deck, clean it up immediately. If you don’t wipe up these spills within seven days, any resulting permanent stains will not be covered under the Trex stain warranty.

What to do if you spill grease on Trex deck?

If you spill food, grease or oil on your deck, immediately clean the area with hot water. Any remaining stains should be cleaned with Pour-N-Restore, a commercial cleaner. Follow these simple steps, and your Trex decking will look great for years to come. Check out 10 Trex deck ideas we love.

How to remove tannin stains from Trex decking?

To remove tannin stains from debris, such as leaves, apply a commercial deck brightener once the Tre x decking is dry. Make sure to follow the manufacturer instructions, and check to see if the product contains bleach or acid.

Is Trex decking durable?

Melanie Radzicki McManus Updated: Jul. 16, 2021. You probably love your Trex decking because it’s durable and low-maintenance. But you still have to clean it occasionally to keep it looking great. StockPhotoFan1/Shutterstock. You probably love your Trex decking because it’s durable and low-maintenance.