Then, look in the back of the motor housing for the nut that is in the back of the impeller. It is what is holding the impeller to the motor. You will need to use pliers to hold the nut in place while you use a screwdriver to loosen and remove the screw from the front of the impeller. Then, you will be able to remove the pool pump impeller.
How to remove a pool pump impeller?
Then, look in the back of the motor housing for the nut that is in the back of the impeller. It is what is holding the impeller to the motor. You will need to use pliers to hold the nut in place while you use a screwdriver to loosen and remove the screw from the front of the impeller. Then, you will be able to remove the pool pump impeller.
How do you know if your pool pump impeller is clogged?
Your impeller is probably also clogged if the filter pressure reads lower than usual and the water in your pool pump is moving in a swirling motion or slowly. Another sign of a pool pump impeller being stuck is if it is making a low, grinding noise, or any other rough sound.
How do you remove the impeller on a power steering pump?
Hold the nut in place with the pliers and unscrew the impeller. Depending on how long the impeller has been in place, it may take a bit of pressure to remove the screw while holding the nut in place. Once you remove the screw, you can remove the impeller.
Why is my pool impeller stuck?
Anything from grass clippings, pine needles, broken pieces of pool plaster, tiny pieces of dirt or rocks, or even plant stamens from trees can be responsible for a clogged impeller. You can usually tell if your impeller is stuck if your pool’s water flow seems low or if the lid of the pump basket is not filling up with water the way it should.
How do you remove an impeller?
1:193:29How To Replace A Pump Impeller - YouTubeYouTubeStart of suggested clipEnd of suggested clipHold the shaft in place with a J wrench or crescent ridge place around the flat area between theMoreHold the shaft in place with a J wrench or crescent ridge place around the flat area between the gland and the flinger. Unscrew the impeller from the shaft. Remove the o-ring from the shaft.
Can you change an impeller in a pool pump?
Pool pumps aren't cheap, so when yours stops running properly, you should understand how it works and determine whether you can fix the problem yourself to save yourself some money on the repair. That's the case with the impeller. If it breaks, you can replace it on your own. You just need to know how to do it.
Are pool pump impellers reverse thread?
The reverse thread of the impeller tightens the impeller as the motor turns. If this is the case, first, remove the impeller screw by turning clockwise. If you're having problems removing the screw, inspect for corrosion or calcium buildup. A heavily corroded impeller screw can make it difficult to remove.
How do you remove an impeller cover?
2:124:22How to remove Impeller Housing - sea doo/yamaha/kawasaki - YouTubeYouTubeStart of suggested clipEnd of suggested clipAfter removing all the nuts go ahead and shift the rubber hose downward. And remove it from thisMoreAfter removing all the nuts go ahead and shift the rubber hose downward. And remove it from this connection. Point everything is loose you will carefully grab it at a firm location.
How do I know if my pool pump impeller is bad?
What are the symptoms of a clogged impeller? If your pool pump impeller is clogged, it's probably making some unpleasant noises (a low, grinding sound). If you look at your filter pressure, it's likely only half of what it normally reads and the water in your pump is moving slowly or making a swirling motion.
How do you find the impeller on a pool pump?
1:022:19How To: Clean Out A Pool Pump Impeller - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou'll need to unscrew the pump lid and remove the strainer basket. Next using a pair of pliers.MoreYou'll need to unscrew the pump lid and remove the strainer basket. Next using a pair of pliers. Make a small 1/2 inch to 3/4 inch hook at the end of a metal coat hanger.
How do I take apart my pool pump motor?
3:3013:35How to Replace a Pool Pump Motor -The Ultimate Video Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou have a pump held on by a clamp like this simply just undo this clamp here and the motor willMoreYou have a pump held on by a clamp like this simply just undo this clamp here and the motor will separate from the pump.
Which way does a pump impeller turn?
1:223:10How to Determine Impeller Rotation - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe flow path rotation always determines whether the impeller and pump are clockwise orMoreThe flow path rotation always determines whether the impeller and pump are clockwise or counterclockwise in rotation on flooded suction underground pumps there are clockwise.
How do you remove a raw water pump impeller?
0:523:34Replacing the Raw Water Pump - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe best tool for removing the impaler is an impeller puller. If you have one using in our case theMoreThe best tool for removing the impaler is an impeller puller. If you have one using in our case the appellant was so destroyed that we used a set of pliers.
Where is the impeller located on a pool pump?
The impeller is located right behind the pump basket, so you have to remove the basket to access the impeller. Remove the pump filter assembly by removing a series of bolts located around the circumference of the pool pump using a ratchet set.
How to remove a screw from an impeller?
Hold the nut in place with the pliers and unscrew the impeller. Depending on how long the impeller has been in place, it may take a bit of pressure to remove the screw while holding the nut in place. Once you remove the screw, you can remove the impeller.
What do you need to keep a pool clean?
Things You'll Need. Pliers/ratchet set. Screwdriver. The impeller is the heart of a pool filter. When it comes to maintaining a clean pool, you must have a properly functioning pool filter in addition to the right mix of chemicals. If the pool filter stops working, it is impossible to keep the pool clean. The impeller is the heart of the pool ...
What happens if your pool filter stops working?
If the pool filter stops working, it is impossible to keep the pool clean. The impeller is the heart of the pool filtration system. It creates the suction that draws the water from the pool into the filter. If it becomes defective, you must repair or replace it. Advertisement.
Can you remove the impeller on a pool pump?
Unless you’re comfortable working with motors, you should have a pool professional remove the impeller. Although you can access the front of the impeller by removing the pump basket assembly, you cannot reach the nut on the other end of the screw that holds the impeller in place. In order to access the nut, you must enter through the back ...
How to prevent impeller clogs in pool?
Cover your pool when you’re not using it. Use a skimmer to keep the pool surface clean, especially in early spring.
How to push a pump impeller?
You probably won’t be able to see the impeller at the bottom of the pump, so you’ll need a tool. Gently insert a long screwdriver or a wire coat hanger into the pump so you can use it to push the impeller clockwise and counterclockwise.
How to keep pool clean in spring?
Use a skimmer to keep the pool surface clean, especially in early spring. Line your pump basket with skimmer socks or nylons to catch small debris. Keep nearby trees and bushes trimmed, so the leaves don’t fall into the pool. Always make sure that there are no cracks in your skimmer baskets or pump baskets.
What is the importance of a pool pump?
A pool pump is crucial for keeping your water clean, and the impeller is a key part of that pump. Knowing how to clean the pool pump impeller will help keep your pool in great shape all season.
How to separate a pump from a stand motor?
Pull the motor straight back so you can separate the pump from the stand motor. If your pump has a diffuser piece or impeller shroud, remove it so you can see into the impeller. Now you’ll be able to use the screwdriver, coat hanger, or even needle nose pliers to remove the debris from the impeller.
Where is the impeller located on a motor?
The impeller is near the motor basket pump, which should keep debris from clogging the impeller, but it doesn’t always work that way. Small particles can slip through the motor basket pump and accumulate to clog the impeller over time.
Do pool pumps have cracks?
Always make sure that there are no cracks in your skimmer baskets or pump baskets. These pieces will get brittle over time due to the chemicals in your pool water, so routinely checking them can prevent serious damage. An efficient pool pump will also save energy and lower your utility bill.
