How to Remove the Ignition Switch Without a Key Turn on your power drill and use your drill bit to make a hold in the key slot of the ignition cylinder. Insert a straightened out paperclip into the slot just to the left of the key cylinder.
How to remove and replace an ignition lock cylinder?
- Tools You’ll Need To Change An Ignition Key Lock Without A Key
- Step One – Battery Disconnection. ...
- Step Two – Steering Wheel Removal. ...
- Step Three – Remove the Wipers and Indicator Switches. ...
- Step Four – Steering Column Sleeve Removal. ...
- Step Five – Electrics to Ignition Switch disconnection. ...
- Step Six – Mounting Bolts Removal. ...
How do you replace ignition lock cylinder?
Part 1 of 1: Replacing the ignition lock cylinder
- Boxed end wrench or ratchet sets
- Flashlight or drop light
- Replacement ignition lock cylinder
- Regular sized flat blade and Phillips head screwdriver
- Safety equipment (safety glasses)
- Scan tool
- Small flat blade screwdriver
How to change out your ignition lock cylinder?
- You’ll have to wiggle or shake your car key when it’s in your ignition to get it to turn
- You’ll notice that you can remove your car from your ignition regardless of which position it’s in
- You’ll find that your car will sometimes keep running even when you’ve taken your car key out of your ignition
How do you change an ignition lock?
Part 3 Part 3 of 3: Installing a Replacement
- Squeeze the release pin on the ignition switch so it’s flush with the side. ...
- Slide the ignition switch into its hole. The new or rebuilt switch should slide easily back into its hole on the steering column.
- Reconnect the battery and test the new switch. ...
- Shut the engine off (if it starts) and disconnect the battery again. ...
How do you remove the ignition lock cylinder on a Chevy Silverado without the key?
How to Remove Ignition Lock Cylinder Chevy Without KeyDisconnect the negative terminal of the battery. Disconnect the negative cable from the car battery. ... Remove the Cover. To remove the steering column cover, use a screwdriver and socket wrench. ... Remove Electrical Connections. ... Check Bolts. ... Reinstall all.
How do you remove an ignition barrel without the key?
1:275:35How to Replace or Fix an Ignition Lock Cylinder to Unlock Steering WheelYouTubeStart of suggested clipEnd of suggested clipThe key all right first thing you can do is to get yourself a nice heavy-duty screwdriver. Then grabMoreThe key all right first thing you can do is to get yourself a nice heavy-duty screwdriver. Then grab yourself a nice heavy hammer. Then start hammering away until you can get the screwdriver.
Can you remove ignition lock cylinder without a key?
Take your screwdriver and insert it into the ignition lock cylinder. Turn it as far round in a clockwise direction that you can. Then pull the paperclip to the right as much as you can. You should then be able to slide the switch out easily.Mar 21, 2021
How do you change the ignition lock cylinder on a Chevy truck?
How to Change a Chevy Truck Ignition CylinderRemove the screws on the underside of the steering column cover.Pull the cover down.Push the punch pin up into the access hole under the ignition cylinder.Pry the ignition lock out of the steering column with a flat tip screwdriver.
How to disconnect a car battery?
The first thing you need to do is to disconnect your battery. This will ensure that you don’t get electrocuted or short anything in the car. Remove negative cable terminal to disconnect the battery. With the negative terminal removed, you will be safe to work on your car.
What to do when you lose your key?
With a key, removing the ignition is easy. But when you lose your key, you can also use simple tools such as screwdrivers and remove the ignition lock. In this article, we will share with you a simple ...
How to remove the steering wheel cover?
After you have removed the covers, lift the wheel up – pull at the center cover. Disconnect the horn wires. Retain the washers and nuts as you remove the steering wheel. Finally, pull the steering wheel from its shaft.
Why do cars have safety snap off bolt heads?
The main role of this component is to prevent thieves from replacing your can ignition lock and driving it off without a key.
