Receiving Helpdesk

how do you remove the cover on a whirlpool ice maker

by Alexandrine Schumm Published 3 years ago Updated 3 years ago

How do you remove the cover on a Whirlpool ice maker?

  • Reset Refrigerator.
  • Turn the refrigerator's temperature control knob to the "Off" position.
  • Remove the power cord from the wall outlet.
  • Reconnect the power cord to the wall outlet.
  • Turn the temperature control knob to the desired temperature.
  • Reset Ice Maker.
  • Locate the switch next to the water filter status light.

Part of a video titled How To: Whirlpool/KitchenAid/Maytag Ice Maker Cover ...
0:43
4:52
Once you have the cover lifted up we're gonna take a small flat-head screwdriver and flex theMoreOnce you have the cover lifted up we're gonna take a small flat-head screwdriver and flex the bracket over so we can pull these pins out on each side.

Full Answer

How do you disconnect the ice maker on a whirlpool refrigerator?

grasp the wire harness connector at the back. 1) press the two tabs and disconnect the ice maker. How to remove an ice maker from whirlpool refrigerator?

How do you remove an ice dispenser cover?

The process of removing the ice dispenser cover is relatively straightforward, though it may take a little time to execute. You have to take off the plastic trim beneath. Then, there are eight screws underneath the trim that have to be removed as well. Need appliance repair services? Get free, zero-commitment quotes from pro contractors near you.

How do I remove the ice maker from my LG refrigerator?

1) press the depress locking tab at the top then you’ll be able to just grab the icemaker and Slide it forward. while you’re doing that just make sure that that coil underneath the ice maker is free and that snagging on anything. How to remove an ice maker from LG refrigerator?

How do you change the fill bar on a Frigidaire ice maker?

Unhook the metal fill bar from the original ice maker. Pull the metal tip from the far end, then unhook the loop from the close end. Reverse that process to put the fill bar onto the new ice maker. Fit on the hook, then stretch the fill bar to fit in the metal tip.

How do you remove the ice dispenser cover on a Whirlpool refrigerator?

0:301:36Whirlpool Refrigerator Replace Dispenser Façade #W10153724YouTubeStart of suggested clipEnd of suggested clipTray. Now insert a putty knife behind the bottom of the facade. And push the facade down while usingMoreTray. Now insert a putty knife behind the bottom of the facade. And push the facade down while using the putty knife to pull the facade. Outward.

How do I open my Whirlpool ice maker?

0:0225:28How To Fix Ice Maker on Whirlpool French Door Refrigerator - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo to open the ice maker here we push right here. And as we push in you pull back that's it so youMoreSo to open the ice maker here we push right here. And as we push in you pull back that's it so you push here and just pull it's tricky sometimes you have to wiggle it a little bit pull it out.

How do you take the ice dispenser cover off?

0:592:40Whirlpool Refrigerator Replace Ice Dispenser Door Flap 2180353YouTubeStart of suggested clipEnd of suggested clipWay. Now depress the tabs on the top of the ice guide and lift the guide. Out lift up the ice chuteMoreWay. Now depress the tabs on the top of the ice guide and lift the guide. Out lift up the ice chute door and use a small flat-head screwdriver to detach the old chute door from the door closer.

How do I remove the front of my ice maker?

7:1714:43Whirlpool Refrigerator Disassembly (#WRX735SDBM00)/Repair HelpYouTubeStart of suggested clipEnd of suggested clipTo remove the ice maker assembly depress the release button and pull out the ice bin insert a smallMoreTo remove the ice maker assembly depress the release button and pull out the ice bin insert a small flathead screwdriver into the side cover access hole and press down to release the locking lever.

How do you remove the glass from a Whirlpool refrigerator?

1:143:24Whirlpool Refrigerator Repair - How to Replace the Shelf Glass Insert ...YouTubeStart of suggested clipEnd of suggested clipSo what we'll need to do is lift up on that glass. So that clear so stops. And then we're just goingMoreSo what we'll need to do is lift up on that glass. So that clear so stops. And then we're just going to push it. Forward. Once it's broke free from the front you should slide over brother.

How do you clean the ice maker on a Whirlpool refrigerator?

How to Clean a Whirlpool Ice MakerRemove the ice maker bin and wash it in warm, soapy water. ... Dampen a cloth or paper towel with the same bleach solution and wipe down the ice maker in the freezer. ... Wipe the ice maker unit with a dry cloth to make sure no moisture remains.More items...•Jan 15, 2020

How do you remove the front panel of a Whirlpool refrigerator?

0:533:28How To: Refrigerator Dispenser Front Cover - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou get it underneath. You can twist it and lift up and that'll release the tab. Once you have theMoreYou get it underneath. You can twist it and lift up and that'll release the tab. Once you have the two lower tabs release all you have to do is lift up on it.

What do you need to know before you start an ice maker repair?

Before you start the repair, take your necessary safety precautions. The ice maker is an electrical component and you will be handling wires. There is also a water line that supplies the water for ice. You will need to shut off everything.

What is a Whirlpool refrigerator?

This is a practical, simple model with a spacious refrigerator cabinet and the convenience of an in-freezer ice maker. The Whirlpool standard ice maker includes an ice mold assembly ...

How to stop water from flowing in refrigerator?

Close the Water Line to the Fridge. Your ice maker needs water, so your fridge is connected to a water line. Close the emergency valve and the refrigerator valve to stop water from flowing without an ice maker in place.

Step1. Put the refrigerator into Defrost mode

1) hold down the energy saver button and the fridge button for about eight seconds.

Step3. Remove the wire housing cover

1) Using a Philips screwdriver to remove the wire housing cover screw.

Step4. Remove the ice tray duct

1) using a Philips screwdriver to remove the screw for the ice tray duct.

Step5. Pry down the cooling coil on the ice maker

1) take a flat blade screwdriver and pry down the cooling coil Just enough.

Step6. release the ice maker

1) press the depress locking tab at the top then you’ll be able to just grab the icemaker and Slide it forward.

Step5. Remove these two bottom screws and one right in the center

1) There’s another one right at the very top, it has a big plastic washer harness with it loosen.

Step6. Lift on the whole assembly

1) to make sure that we lift up and out on the bottom of this and also press up on the top.

Step 1

Locate the slot on the bottom of the plastic trim, located on either the left or right side.

Step 3

Pry the corner of the plastic trim off of the front of the refrigerator, being careful not to break the plastic trim.

Step 4

Continue to gently pry the plastic trim, working around the ice dispenser until the trim is separated from the refrigerator.

Step 5

Remove the cables connected to the rear of the control panel to completely remove the trim.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9
8.3.21PHP Version1.57sRequest Duration2MBMemory UsageGET {post}Route
  • warninglog[03:19:42] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[03:19:42] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[03:19:42] LOG.warning: Callables of the form ["Swift_SmtpTransport", "Swift_Transport_EsmtpTranspor...
  • warninglog[03:19:42] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[03:19:42] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[03:19:42] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[03:19:42] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[03:19:42] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[03:19:42] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • Booting (12.29ms)
  • Application (1.56s)
  • 1 x Application (99.2%)
    1.56s
    1 x Booting (0.78%)
    12.29ms
    7 templates were rendered
    • themes.DevBlog.content.post (resources/views/themes/DevBlog/content/post.blade.php)34blade
      Params
      0
      post
      1
      postContent
      2
      author
      3
      updated_at
      4
      bing_rich_snippet_text
      5
      bing_rich_snippet_link
      6
      bing_related_keywords
      7
      google_related_keywords
      8
      bing_news_title
      9
      bing_news_description
      10
      bing_videos
      11
      bing_images
      12
      bing_search_result_title
      13
      bing_search_result_description
      14
      bing_search_result_url
      15
      bing_paa_questions
      16
      bing_paa_answers
      17
      bing_slider_faq_questions
      18
      bing_slider_faq_answers
      19
      bing_pop_faq_questions
      20
      bing_pop_faq_answers
      21
      bing_tab_faq_questions
      22
      bing_tab_faq_answers
      23
      google_faq_questions
      24
      google_faq_answers
      25
      google_rich_snippet
      26
      google_search_result
      27
      indexedArray
      28
      total_images
      29
      total_videos
      30
      settings
      31
      url_current
      32
      menus
      33
      sidebar
    • themes.DevBlog.layouts.master (resources/views/themes/DevBlog/layouts/master.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.head (resources/views/themes/DevBlog/panels/head.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.header (resources/views/themes/DevBlog/panels/header.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.navbar (resources/views/themes/DevBlog/panels/navbar.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.footer (resources/views/themes/DevBlog/panels/footer.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.scripts (resources/views/themes/DevBlog/panels/scripts.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    uri
    GET {post}
    middleware
    web, checkdate
    as
    post.show
    controller
    App\Http\Controllers\Frontend\json_data\PostController@show
    namespace
    where
    file
    app/Http/Controllers/Frontend/json_data/PostController.php:18-166
    7 statements were executed1.54s
    • select * from `posts` where `published_at` <= '2025-07-07 03:19:42' and `slug` = 'how-do-you-remove-the-cover-on-a-whirlpool-ice-maker' and `posts`.`deleted_at` is null limit 1
      6.03ms/app/Providers/RouteServiceProvider.php:54receivinghelpdeskask
      Metadata
      Bindings
      • 0. 2025-07-07 03:19:42
      • 1. how-do-you-remove-the-cover-on-a-whirlpool-ice-maker
      Backtrace
      • 15. /app/Providers/RouteServiceProvider.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/Router.php:842
      • 19. Route binding:39
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/VerifyCsrfToken.php:78
    • select * from `json_post_contents` where `json_post_contents`.`post_id` = 150763 and `json_post_contents`.`post_id` is not null and `rewrite_id` = 0
      13.98msmiddleware::checkdate:30receivinghelpdeskask
      Metadata
      Bindings
      • 0. 150763
      • 1. 0
      Backtrace
      • 19. middleware::checkdate:30
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/jetstream/src/Http/Middleware/ShareInertiaData.php:61
      • 22. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/Middleware/SubstituteBindings.php:50
    • select * from `nova_menu_menus` where `slug` = 'header' limit 1
      1.93ms/vendor/outl1ne/nova-menu-builder/src/helpers.php:32receivinghelpdeskask
      Metadata
      Bindings
      • 0. header
      Backtrace
      • 15. /vendor/outl1ne/nova-menu-builder/src/helpers.php:32
      • 17. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 19. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
      • 20. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:205
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`menu_id` = 1 and `nova_menu_menu_items`.`menu_id` is not null and `parent_id` is null order by `parent_id` asc, `order` asc, `name` asc
      1.66ms/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Bindings
      • 0. 1
      Backtrace
      • 19. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 20. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 22. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 24. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`parent_id` in (1) order by `order` asc
      1.22ms/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Backtrace
      • 24. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 25. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 27. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 28. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 29. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select `id`, `post_title`, `slug` from `posts` where `status` = 'publish' and `posts`.`deleted_at` is null order by RAND() limit 10
      1.51s/app/View/Composers/SidebarView.php:22receivinghelpdeskask
      Metadata
      Bindings
      • 0. publish
      Backtrace
      • 14. /app/View/Composers/SidebarView.php:22
      • 15. /app/View/Composers/SidebarView.php:12
      • 16. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:124
      • 17. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:162
      • 20. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:177
    • select * from `fake_users` where `fake_users`.`id` = 4118 limit 1
      650μsview::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15receivinghelpdeskask
      Metadata
      Bindings
      • 0. 4118
      Backtrace
      • 21. view::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15
      • 23. /vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:108
      • 24. /vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
      • 25. /vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php:69
      • 26. /vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:61
    App\Models\FakeUser
    1
    Outl1ne\MenuBuilder\Models\MenuItem
    1
    Outl1ne\MenuBuilder\Models\Menu
    1
    App\Models\JsonPostContent
    1
    App\Models\Post
    11
        _token
        dTSbPRZ87YZL3zMOnbEJvgYNHbxIThMTrgZ80yNu
        _previous
        array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-do-you-remove-the-cover-on-a-whirlpool-i...
        _flash
        array:2 [ "old" => [] "new" => [] ]
        PHPDEBUGBAR_STACK_DATA
        []
        path_info
        /how-do-you-remove-the-cover-on-a-whirlpool-ice-maker
        status_code
        200
        
        status_text
        OK
        format
        html
        content_type
        text/html; charset=UTF-8
        request_query
        []
        
        request_request
        []
        
        request_headers
        0 of 0
        array:25 [ "cookie" => array:1 [ 0 => "_pk_id.64.7c30=661d2dba430b7ad1.1751838572.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6InZJQUFUeGwvbVpXSkJ3czZ1TXFJaGc9PSIsInZhbHVlIjoia2VydHVTYk1vNW9mcnJpS1lYZWh5SzVjUyt4OU9kRG9RbGQ3Z21yRjdaZUxPbEJ2cENIbTc0VU5tVjkwOVIyM1JsWWRJc2cybTBpenlDS2w5Qk1yZS9NZzhSSWJzMlIzWmNuUyt3bmhWL3h3NVN6b1VwaWhyR3VYQXBvNUE2ekMiLCJtYWMiOiIxMjJlMTIzNjhiNjY0YzNjYTYxZjkyOTQyNDk0MDc1OWYyY2RjMGVhNGNhMjI3ZjllNWZjZmI3ZDM0ZTE3M2Y5IiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6IjRqSk45Y281OHhYVmNaOE1HdmtuaHc9PSIsInZhbHVlIjoiTStsWXp2Z2dPUTNIc0lja3lVa0FzeWZraENwWGVPcVFxWVM5Qk1VWDltSCs1akJZVEc2OTRUb3NCTGRnMlkraHZCN0wxRTVxbnk5MSthL2F3cXQ3c0JPQldtMUZ5ZjF5UlE4QW5RczlKZlI1MzV3SUxwbzYyVFlWK2FBZUF1RWIiLCJtYWMiOiI0MTNkMGM0ZTQzZTYxNTkyYzViNjAyNmM2ZTdmYTRmZTg2ZTI1MDhmMWMwN2RiMTNhYzc5MzhlNmZiMWQxNmIzIiwidGFnIjoiIn0%3D_pk_id.64.7c30=661d2dba430b7ad1.1751838572.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6InZJQUFUeGwvbVpXSkJ3czZ1TXFJaGc9PSIsInZhbHVlIjoia2VydHVTYk1vNW9mcnJpS1lYZWh5S" ] "cf-ipcountry" => array:1 [ 0 => "US" ] "cf-connecting-ip" => array:1 [ 0 => "216.73.216.144" ] "cdn-loop" => array:1 [ 0 => "cloudflare; loops=1" ] "sec-fetch-mode" => array:1 [ 0 => "navigate" ] "sec-fetch-site" => array:1 [ 0 => "none" ] "accept" => array:1 [ 0 => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" ] "user-agent" => array:1 [ 0 => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" ] "upgrade-insecure-requests" => array:1 [ 0 => "1" ] "sec-ch-ua-platform" => array:1 [ 0 => ""Windows"" ] "sec-ch-ua-mobile" => array:1 [ 0 => "?0" ] "sec-ch-ua" => array:1 [ 0 => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" ] "cache-control" => array:1 [ 0 => "no-cache" ] "pragma" => array:1 [ 0 => "no-cache" ] "accept-encoding" => array:1 [ 0 => "gzip, br" ] "cf-ray" => array:1 [ 0 => "95b250461fc8b2eb-YYZ" ] "priority" => array:1 [ 0 => "u=0, i" ] "sec-fetch-dest" => array:1 [ 0 => "document" ] "sec-fetch-user" => array:1 [ 0 => "?1" ] "cf-visitor" => array:1 [ 0 => "{"scheme":"https"}" ] "connection" => array:1 [ 0 => "close" ] "x-forwarded-proto" => array:1 [ 0 => "https" ] "x-forwarded-for" => array:1 [ 0 => "216.73.216.144, 108.162.241.31" ] "x-server-addr" => array:1 [ 0 => "154.12.239.204" ] "host" => array:1 [ 0 => "receivinghelpdesk.com" ] ]
        request_server
        0 of 0
        array:56 [ "USER" => "runcloud" "HOME" => "/home/runcloud" "SCRIPT_NAME" => "/ask/index.php" "REQUEST_URI" => "/ask/how-do-you-remove-the-cover-on-a-whirlpool-ice-maker" "QUERY_STRING" => "" "REQUEST_METHOD" => "GET" "SERVER_PROTOCOL" => "HTTP/1.0" "GATEWAY_INTERFACE" => "CGI/1.1" "REDIRECT_URL" => "/ask/how-do-you-remove-the-cover-on-a-whirlpool-ice-maker" "REMOTE_PORT" => "34536" "SCRIPT_FILENAME" => "/home/runcloud/webapps/ReceivingHelpDesk/ask/index.php" "SERVER_ADMIN" => "you@example.com" "CONTEXT_DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "CONTEXT_PREFIX" => "" "REQUEST_SCHEME" => "http" "DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "REMOTE_ADDR" => "108.162.241.31" "SERVER_PORT" => "80" "SERVER_ADDR" => "127.0.0.1" "SERVER_NAME" => "receivinghelpdesk.com" "SERVER_SOFTWARE" => "Apache/2.4.63 (Unix) OpenSSL/1.1.1f" "SERVER_SIGNATURE" => "" "LD_LIBRARY_PATH" => "/RunCloud/Packages/apache2-rc/lib" "PATH" => "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" "HTTP_COOKIE" => "_pk_id.64.7c30=661d2dba430b7ad1.1751838572.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6InZJQUFUeGwvbVpXSkJ3czZ1TXFJaGc9PSIsInZhbHVlIjoia2VydHVTYk1vNW9mcnJpS1lYZWh5SzVjUyt4OU9kRG9RbGQ3Z21yRjdaZUxPbEJ2cENIbTc0VU5tVjkwOVIyM1JsWWRJc2cybTBpenlDS2w5Qk1yZS9NZzhSSWJzMlIzWmNuUyt3bmhWL3h3NVN6b1VwaWhyR3VYQXBvNUE2ekMiLCJtYWMiOiIxMjJlMTIzNjhiNjY0YzNjYTYxZjkyOTQyNDk0MDc1OWYyY2RjMGVhNGNhMjI3ZjllNWZjZmI3ZDM0ZTE3M2Y5IiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6IjRqSk45Y281OHhYVmNaOE1HdmtuaHc9PSIsInZhbHVlIjoiTStsWXp2Z2dPUTNIc0lja3lVa0FzeWZraENwWGVPcVFxWVM5Qk1VWDltSCs1akJZVEc2OTRUb3NCTGRnMlkraHZCN0wxRTVxbnk5MSthL2F3cXQ3c0JPQldtMUZ5ZjF5UlE4QW5RczlKZlI1MzV3SUxwbzYyVFlWK2FBZUF1RWIiLCJtYWMiOiI0MTNkMGM0ZTQzZTYxNTkyYzViNjAyNmM2ZTdmYTRmZTg2ZTI1MDhmMWMwN2RiMTNhYzc5MzhlNmZiMWQxNmIzIiwidGFnIjoiIn0%3D_pk_id.64.7c30=661d2dba430b7ad1.1751838572.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6InZJQUFUeGwvbVpXSkJ3czZ1TXFJaGc9PSIsInZhbHVlIjoia2VydHVTYk1vNW9mcnJpS1lYZWh5S" "HTTP_CF_IPCOUNTRY" => "US" "HTTP_CF_CONNECTING_IP" => "216.73.216.144" "HTTP_CDN_LOOP" => "cloudflare; loops=1" "HTTP_SEC_FETCH_MODE" => "navigate" "HTTP_SEC_FETCH_SITE" => "none" "HTTP_ACCEPT" => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" "HTTP_USER_AGENT" => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" "HTTP_UPGRADE_INSECURE_REQUESTS" => "1" "HTTP_SEC_CH_UA_PLATFORM" => ""Windows"" "HTTP_SEC_CH_UA_MOBILE" => "?0" "HTTP_SEC_CH_UA" => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" "HTTP_CACHE_CONTROL" => "no-cache" "HTTP_PRAGMA" => "no-cache" "HTTP_ACCEPT_ENCODING" => "gzip, br" "HTTP_CF_RAY" => "95b250461fc8b2eb-YYZ" "HTTP_PRIORITY" => "u=0, i" "HTTP_SEC_FETCH_DEST" => "document" "HTTP_SEC_FETCH_USER" => "?1" "HTTP_CF_VISITOR" => "{"scheme":"https"}" "HTTP_CONNECTION" => "close" "HTTP_X_FORWARDED_PROTO" => "https" "HTTP_X_FORWARDED_FOR" => "216.73.216.144, 108.162.241.31" "HTTP_X_SERVER_ADDR" => "154.12.239.204" "HTTP_HOST" => "receivinghelpdesk.com" "HTTPS" => "on" "REDIRECT_STATUS" => "200" "REDIRECT_HTTPS" => "on" "FCGI_ROLE" => "RESPONDER" "PHP_SELF" => "/ask/index.php" "REQUEST_TIME_FLOAT" => 1751838582.759 "REQUEST_TIME" => 1751838582 ]
        request_cookies
        0 of 0
        array:4 [ "_pk_id_64_7c30" => null "_pk_ses_64_7c30" => null "XSRF-TOKEN" => "dTSbPRZ87YZL3zMOnbEJvgYNHbxIThMTrgZ80yNu" "askhelpdesk_session" => "07dXiv9ZPUCGX3hSTbihaQXR0d1j0F8vpcH0OqkQ" ]
        response_headers
        0 of 0
        array:7 [ "content-type" => array:1 [ 0 => "text/html; charset=UTF-8" ] "cache-control" => array:1 [ 0 => "private, must-revalidate" ] "date" => array:1 [ 0 => "Sun, 06 Jul 2025 21:49:42 GMT" ] "pragma" => array:1 [ 0 => "no-cache" ] "expires" => array:1 [ 0 => -1 ] "set-cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IklVbTBSMGdBUC9WekpwZTZ3Kzk4eHc9PSIsInZhbHVlIjoiWXgxcUlRbjFNeE14VU5jVFZUQWR1UmJvZ3ZYMHJseEhuazJsZFlvaFZMWm9rdGNuU3E1cDBtQnJvMTBCTDRXVFdMS0dxVWI2MmI0K1U2N1JzVVkrZVNCV2EvSDRIZ1l5ZVhnTnhYdTJmZXZWRmxQRFQvamdVU05hRytUZkUrRm0iLCJtYWMiOiIyMGIxYjM3MDI0N2NmMDljNGYwYTUwNDcwZDg0NDg1MzE2YjI0ZDQ1NjhmYjAwOGYwNzZiMDc0MTdhN2VlYmZjIiwidGFnIjoiIn0%3D; expires=Sun, 06-Jul-2025 23:49:44 GMT; Max-Age=7200; path=/; samesite=laxXSRF-TOKEN=eyJpdiI6IklVbTBSMGdBUC9WekpwZTZ3Kzk4eHc9PSIsInZhbHVlIjoiWXgxcUlRbjFNeE14VU5jVFZUQWR1UmJvZ3ZYMHJseEhuazJsZFlvaFZMWm9rdGNuU3E1cDBtQnJvMTBCTDRXVFdMS0dxV" 1 => "askhelpdesk_session=eyJpdiI6IlpIc1Z3a0pkU29WbDNOdU1pd1o0V1E9PSIsInZhbHVlIjoiZDRPUkdjVDVBYlIxNFZ4RlFBNWlvWDBqL3BXUFZlMUw0MDFCTEN1ZkI2VnIrNy9MVkJDVFNGQ3BHZHAyK1BMbE1yOGZQVmY1UXNhVUVEV25CdXcyS2h0VlIxeW0wSXQ0aTRraXJnbkZLbWlNNGdaRVZTNFQxY2lsRlA0T296MlEiLCJtYWMiOiIzOGU4Y2YyNTllZjg2NzA5NjUwYzg3NWZlYTA1MDNhNjNiZGVhNGQ5ZGVkMDhhNzQ1MGE2YTc5ODNiN2M4ZTk5IiwidGFnIjoiIn0%3D; expires=Sun, 06-Jul-2025 23:49:44 GMT; Max-Age=7200; path=/; httponly; samesite=laxaskhelpdesk_session=eyJpdiI6IlpIc1Z3a0pkU29WbDNOdU1pd1o0V1E9PSIsInZhbHVlIjoiZDRPUkdjVDVBYlIxNFZ4RlFBNWlvWDBqL3BXUFZlMUw0MDFCTEN1ZkI2VnIrNy9MVkJDVFNGQ3BHZHAyK1BM" ] "Set-Cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IklVbTBSMGdBUC9WekpwZTZ3Kzk4eHc9PSIsInZhbHVlIjoiWXgxcUlRbjFNeE14VU5jVFZUQWR1UmJvZ3ZYMHJseEhuazJsZFlvaFZMWm9rdGNuU3E1cDBtQnJvMTBCTDRXVFdMS0dxVWI2MmI0K1U2N1JzVVkrZVNCV2EvSDRIZ1l5ZVhnTnhYdTJmZXZWRmxQRFQvamdVU05hRytUZkUrRm0iLCJtYWMiOiIyMGIxYjM3MDI0N2NmMDljNGYwYTUwNDcwZDg0NDg1MzE2YjI0ZDQ1NjhmYjAwOGYwNzZiMDc0MTdhN2VlYmZjIiwidGFnIjoiIn0%3D; expires=Sun, 06-Jul-2025 23:49:44 GMT; path=/XSRF-TOKEN=eyJpdiI6IklVbTBSMGdBUC9WekpwZTZ3Kzk4eHc9PSIsInZhbHVlIjoiWXgxcUlRbjFNeE14VU5jVFZUQWR1UmJvZ3ZYMHJseEhuazJsZFlvaFZMWm9rdGNuU3E1cDBtQnJvMTBCTDRXVFdMS0dxV" 1 => "askhelpdesk_session=eyJpdiI6IlpIc1Z3a0pkU29WbDNOdU1pd1o0V1E9PSIsInZhbHVlIjoiZDRPUkdjVDVBYlIxNFZ4RlFBNWlvWDBqL3BXUFZlMUw0MDFCTEN1ZkI2VnIrNy9MVkJDVFNGQ3BHZHAyK1BMbE1yOGZQVmY1UXNhVUVEV25CdXcyS2h0VlIxeW0wSXQ0aTRraXJnbkZLbWlNNGdaRVZTNFQxY2lsRlA0T296MlEiLCJtYWMiOiIzOGU4Y2YyNTllZjg2NzA5NjUwYzg3NWZlYTA1MDNhNjNiZGVhNGQ5ZGVkMDhhNzQ1MGE2YTc5ODNiN2M4ZTk5IiwidGFnIjoiIn0%3D; expires=Sun, 06-Jul-2025 23:49:44 GMT; path=/; httponlyaskhelpdesk_session=eyJpdiI6IlpIc1Z3a0pkU29WbDNOdU1pd1o0V1E9PSIsInZhbHVlIjoiZDRPUkdjVDVBYlIxNFZ4RlFBNWlvWDBqL3BXUFZlMUw0MDFCTEN1ZkI2VnIrNy9MVkJDVFNGQ3BHZHAyK1BM" ] ]
        session_attributes
        0 of 0
        array:4 [ "_token" => "dTSbPRZ87YZL3zMOnbEJvgYNHbxIThMTrgZ80yNu" "_previous" => array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-do-you-remove-the-cover-on-a-whirlpool-ice-maker" ] "_flash" => array:2 [ "old" => [] "new" => [] ] "PHPDEBUGBAR_STACK_DATA" => [] ]