How do you remove the cartridge from a bathtub faucet?
- TURN OFF WATER. Turning off the water at the shut off valves under the sink.
- PRY OFF HANDLE. Pry off the handle cap using a small flat screwdriver.
- REMOVE HANDLE FROM ASSEMBLY.
- REMOVE THE RETAINING NUT.
- REMOVE THE RETAINING CLIP.
- REMOVE THE O-RING.
- REPLACE THE CARTRIDGE.
- REINSTALL THE O-RING.
How do you replace a faucet cartridge?
Take out both pieces:
- If there is an O-ring, remove it. You can hook it on the end of a screwdriver.
- If you can’t slip off the O-ring, cut it with a utility knife.
- Remove a spring if you see one.
- Clean any debris from the faucet housing with a soft cloth.
- Using a rag, soak up any excess water in the faucet handles.
How to replace a tub or shower cartridge?
- Working time 2 hrs
- Start to finish 2 hrs
- Difficulty Kind of Easy
- Involves Plumbing Skills
How to replace a faucet cartridge?
Replacing the Cartridge
- Loosen the cartridge nuts (1) and remove the old cartridges (2).
- Replace with the new cartridges.
- Replace the cartridge nuts (1) and tighten.
How do I remove this stuck faucet valve cartridge?
- Remove retainer clip (#3) from valve body (#5).
- Screw a 1/2"-13 (N.C) or a 1/2"-20 (N.F.) tap wrench into the inside of the cartridge shell. ...
- Remove the tap wrench.
- Cut a 3/8" hardwood dowel 1-3/4" long.
- Drop the hardwood dowel into the cartridge shell (#2).
- Re-thread the tap wrench into the cartridge shell (#2). ...
How do I replace my bathtub cartridge?
2:306:45Replace a Moen Shower Cartridge - Fix Leaky Tub Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipPull out the old. One. So I'm just going to take a pair of pliers and pull the old cartridge. Out.MorePull out the old. One. So I'm just going to take a pair of pliers and pull the old cartridge. Out. Just like that it happens to be plastic. So we're going to replace this with the new plastic.
How do you remove the cartridge from a bathtub without the tool?
0:432:32How to Remove Stuck Moen Tub Faucet Stem Without Special ToolYouTubeStart of suggested clipEnd of suggested clipSo what I'm doing is I'm putting a screwdriver on each side you just have to break that you have theMoreSo what I'm doing is I'm putting a screwdriver on each side you just have to break that you have the let's see once you have the c-clip out I'll put it right there so you can see that goes on the top.
How do you remove a cartridge from a faucet stem?
0:312:51How to Remove a Faucet Cartridge - YouTubeYouTubeStart of suggested clipEnd of suggested clipBy turning them counterclockwise.MoreBy turning them counterclockwise.
How do you replace a single handle faucet cartridge?
0:372:26Repairing a Leaky Single Handle Cartridge-Type Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a wrench to remove the retainer. Next pull the cartridge from your father. Now that you removeMoreUse a wrench to remove the retainer. Next pull the cartridge from your father. Now that you remove the cartridge you need to take it to your local retailer.
How do you loosen a Moen cartridge?
The usual procedure for removing a cartridge is to unscrew the handle, and after turning off the water, pull out a retaining clip. In the best of circumstances, you then grip the cartridge stem with pliers and pull, and the cartridge should slide right out.
How do you change a shower faucet cartridge?
5:206:30How to Replace a Delta Faucet Shower Cartridge - YouTubeYouTubeStart of suggested clipEnd of suggested clipPliers. Reach in and slide out the cartridge by wiggling it back and forth while pulling. Apply someMorePliers. Reach in and slide out the cartridge by wiggling it back and forth while pulling. Apply some lubricant to the o-rings of a new cartridge and install.
How do I remove the cartridge from my Kohler bathroom faucet?
1:374:19Kohler Bathroom Faucet Cartridge Replacement _Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipOff the water turned off and the socket wrench in place then you want to loosen up the cartridge byMoreOff the water turned off and the socket wrench in place then you want to loosen up the cartridge by turning counter clockwise. If you meet resistance.
How to remove shower cartridges?
Slip off the stem cover and anything else in front of the cartridge. Removing the adapter will reveal a small metal cylinder in the center of the wall opening. However, many shower cartridge systems have a few extra layers of protection around it. Yours may have a white plastic cap, followed by a metal ring. Pull both of them off the cartridge by hand and set them aside.
How to get a new faucet cartridge?
Order a new cartridge by noting the manufacturer’s name and the faucet’s model number. The name is usually printed somewhere on the faucet handle. The model number can sometimes be found on the faucet as well, such as on a tag tied to the cold water line.
What is a faucet cartridge made of?
Your faucet may have a silvery cartridge made of chrome or zinc, or a white one made of plastic.
What to do if your faucet has multiple handles?
If your faucet is connected to multiple handles, remember to replace the cartridge in the other handle as well if necessary.
How to pop a cartridge out of a slot?
It is usually made of steel and situated in a groove on the cartridge. Reach in with a pair of needle nose pliers, then lift it to pop it out of the slot .
Why is the cartridge recognizable?
The cartridge is recognizable because of its column-like stem jutting out from the wall. The cartridge’s base is round and fits inside the wall opening.
What to do if you lose a part?
If you happen to lose a part, order a replacement online or from a hardware store.
How to remove old cartridges from wall?
Use a cartridge removal tool to carefully work the old cartridge back and forth until it can be safely removed from the wall. The cartridge removal tool may be included with the replacement cartridge.
How to remove escutcheon plate?
Remove the escutcheon plate by unscrewing it.
How to make escutcheon plate watertight?
Add a bead of silicone and a foam bead around the back of the escutcheon plate to make a watertight seal.
