How to Remove a Metal Fence Post Set In a Concrete Pad
- Pry and Pull. Try to pry and pull as in the steps above. ...
- Try a Jackhammer. Speaking of vibration, try a jackhammer. ...
- Try a Sledgehammer. Using a sledgehammer requires some serious muscle but can be a useful tool. ...
- If All Else Fails, Cut the Post. If pulling the post proves to be fruitless, you can cut off the post as flush to the concrete as possible.
How do I remove a steel fence post?
Stop going crazy over how to remove fence posts
- Assemble Materials. To get started, you'll need a way to get a bite on the post and something to apply pressure. ...
- Get a Grip. If you're following along with Mike's method, attach the 2-by material to the side of the post, leaving about 2 inches of space between the nailer ...
- Weaken or Wet. ...
- Lift. ...
- Fill. ...
How to pull fence post out of ground?
- Dig a trench next to the footing and tip the post out.
- Wrap a chain around the post and use a high lift jack to pull the post out.
- Screw lag bolts through a chain into the broken off fence post and then use a vehicle winch/come along/high lift jack to pull the post out.
How to remove metal fence posts?
Pull out the post with heavy equipment.
- Rent a post puller from a heavy equipment rental company. Attach it to the post with a chain and push down on the lever to lift the pole vertically.
- Use a chain to hitch the post to a tractor or truck. ...
- You can also use a farm jack to remove posts. Wrap a length of chain around the fence post, and secure the other end to the lifting plate on the ...
Should I set my wooden fence posts with concrete?
Should fence posts be set in concrete? Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place.
How do you get metal poles out of concrete?
1:264:20How to remove a pole from ground set in concrete - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you've got enough stuff dug up and you can drill some holes drill some holes. Again. Be safe ifMoreOnce you've got enough stuff dug up and you can drill some holes drill some holes. Again. Be safe if you've never drilled metal before it might very well be difficult.
How do you remove old metal fence posts?
0:051:455 How To Remove Metal Fence Posts (Metal T Posts) - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then you use your weight to push back on this lever. And it slowly pulls the fenceless out ofMoreAnd then you use your weight to push back on this lever. And it slowly pulls the fenceless out of the ground once you make a little progress you move it down a little bit you only have a shot tape.
How do you remove an aluminum fence post in concrete?
0:186:22How to Remove Aluminium Fences and Concreted Posts - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo if you just go ahead yeah you get the right size spanner yeah and you just want to slide it inMoreSo if you just go ahead yeah you get the right size spanner yeah and you just want to slide it in just like this here. And just sweep it anti-clockwise.
How do you remove fence posts from concrete?
5:537:41The Fastest and Easiest Way to Remove a Fence Post (that works ...YouTubeStart of suggested clipEnd of suggested clipUse a digging bar if you have hard-packed or rocky. Soil. Then wrap the chain around the concrete.MoreUse a digging bar if you have hard-packed or rocky. Soil. Then wrap the chain around the concrete. And use the slip hook to latch the chain to itself pull the chain tight.
How do you remove a metal fence post from the ground without digging?
0:302:54An easy way to remove metal fence posts using items you ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipWater. You know five minutes with a hose no big deal and then I have two cinder blocks or two blocksMoreWater. You know five minutes with a hose no big deal and then I have two cinder blocks or two blocks can you put it the other way Hudson thank you just like that with a piece of two by ten a carjack.
How do you remove metal stakes?
0:181:30Easy Stake Removal | Under 90 Seconds! - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake one of the pieces of pipe. And stick it through the loop that you just made in the chain. PlaceMoreTake one of the pieces of pipe. And stick it through the loop that you just made in the chain. Place the pipe up against the fulcrum. And apply downward pressure as close as you can get to the end.
How do you remove an aluminum fence post?
0:0611:37How To Pull Fence Posts Without Machinery Or Special ToolsYouTubeStart of suggested clipEnd of suggested clipOkay so what you're going to want to do is take your strap or rope or whatever I just happen to beMoreOkay so what you're going to want to do is take your strap or rope or whatever I just happen to be using a load strap from my truck and days what I do is I just make like a loop.
How do you remove galvanized fence posts?
1:093:59How to Remove Chain Link Fence Poles and Remove ConcreteYouTubeStart of suggested clipEnd of suggested clipWhat you do is you'll dig down on one side of that pole and as you dig down on this one side justMoreWhat you do is you'll dig down on one side of that pole and as you dig down on this one side just dig it down a little bit then you'll grab the pole. And just rock it back and forth back.
Can you reuse metal fence posts?
Whether the fence is over your property line, or maybe the fence was installed badly, you can actually pull chain link fence posts and reuse them. Though it isn't technically challenging to dig out a fence post, it can be hard work, especially if your posts are set in concrete.
How do you remove a fence post without removing concrete?
The best way to replace a fence post without removing the concrete footing is by prying it out. You can do this with a long lever and fulcrum or a car jack. In either case, nail some wood to the post first to pry against and then get to work. Pry until the post releases from the concrete and comes all the way out.
How do you remove a fence post without a jack?
If you don't have a jack, (but you do have a helper) you can simply lift on both sides of the bar. Two strong workers lifting from their legs can pull up almost any fence post in this fashion.
How do you pull up fence posts?
The trick to removing a fence post is to apply force upward, so that you're not fighting the strength of the earth on either side of the buried post. This can be done with a jack or machinery, or with a lever and some elbow grease. One of the best post-pulling techniques comes from Family Handyman reader Mike Barnes.
Buried Concrete
If your metal posts have been set in buried concrete, it's best to pull the concrete out with the each post, and with mechanical help, you can avoid excessive digging. Drill a 1/2-inch hole through each post -- about 4 inches above the ground -- and insert a length of 3/8-inch re-bar to provide a grip.
Concrete Pad
You may be able to lever or jack the posts out of a concrete pad -- especially if they extend all the way through the pad and the other end is free of protrusions. If this doesn't work, your only recourse short of breaking up the pad is to cut the posts flush with an angle grinder or reciprocating saw that has a metal-cutting blade attached.
How do you remove concrete from metal posts?
To remove the concrete from the steel posts you’re going to need to use a sledgehammer. Put on heavy gloves and safety goggles. Use goggles rather than glasses. There’s no way to avoid heavy work with this.
How do you fix a wobbly mailbox post?
Choose firm materials, such as rocks, cut-down cedar shingles, or even mixing concrete. Using a level, move the post so that it is straight up and down. Wedge materials next to the post to fill the gaps, ensuring the post stays straight. Once secure, pour sand inside the hole to fill any remaining gaps.
Can you reuse fence posts with concrete?
Some of those older poles are nice and heavy gauge (not like the thin ones sold now ) and if not totally rusted are perfect to reuse.
Step 1 - Prepare
Step 2 - Use A Farm Jack
- You should hire or buy a farm jack, also known as a high lift jack, in order to remove the steel fence posts. You need to place it on a flagstone next to the steel post you’re removing from the ground. The tongue of the jack should be facing toward the post. Place it on a flagstone for two reasons: it distributes the weight, and it also stops the jack sinking into the ground.
Step 3 - Lift
- Your chain needs to be heavy for the weight and force. The metal in each link should be ¼ or more in diameter. Loop the chain around the posts as low as you can. Put each end of the chain on the tongue of the jack. Start to crank the jack. As you do so the chain will tighten around the steel fence posts. Keep checking to ensure the chain doesn’t slip. If it begins to, you should loosen th…
Step 4 - Remove Concrete
- To remove the concrete from the steel posts you’re going to need to use a sledgehammer. Put on heavy gloves and safety goggles. Use goggles rather than glasses. There’s no way to avoid heavy work with this. You have to keep bringing the hammer down to chip off the concrete. You will eventually remove most of the concrete from the steel fence posts. To finish off the job you sho…