Note:
- Raise the lid.
- Pull the liquid fabric softener dispenser up (if used), to remove it from the top of the agitator.
- Insert a small screwdriver in the slot between the agitator and cap and pry the cap off the agitator.
- Reach in and remove the barrier cap and gasket by pulling up.
Why is my Whirlpool washing machine not agitating?
- Unplug the washer for 1 minute from the electrical outlet.
- Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid.
- The motor has now been reset and is ready for you to start a cycle.
Can a washer work without an agitator?
Without an agitator, your washing machine has to have a way to stir and scrub those clothes. This means that you have two options if you want to have a washer without an agitator. You can either choose a front-loader washer with a rotating drum, or you can have a washer with an impeller.
How to fix an agitator on a washing machine?
Washing Machine Repair Cost by Brand
- Kenmore Washer Repair Cost. ...
- GE Washer Repair. ...
- Crosley Washer Repair. ...
- Maytag Washer Repair Cost. ...
- Frigidaire Washer Repair. ...
- Samsung Washing Machine Repair Cost. ...
- LG Washer Repair Cost. ...
- Whirlpool Washing Machine Repair Cost. ...
- Bosch Washing Machine Repair Cost. ...
- Speed Queen Washing Machine Repair. ...
How to remove agitator on Hotpoint washer?
Things You Will Need
- Flathead screwdriver
- 8- to 10-inch socket extension
- Socket wrench
- 1/2-inch or a 7/16-inch socket
How do you remove the agitator from a Whirlpool top load washer?
0:061:02Whirlpool Top Load Washer Agitator Assembly #3951744 - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo replace the agitator on your washer first remove the fabric dispenser. You can use a flatheadMoreTo replace the agitator on your washer first remove the fabric dispenser. You can use a flathead screwdriver to help pry it off if necessary. Pull out the agitator cap.
How do I remove the agitator from a top load washer?
0:392:50How to Clean, Remove and Replace the Agitator in your Washing MachineYouTubeStart of suggested clipEnd of suggested clipAnd then write down the center of the agitator as a little wound yard remove that just hold theMoreAnd then write down the center of the agitator as a little wound yard remove that just hold the agitator as you unscrew anticlockwise.
How do I take apart my whirlpool agitator?
0:051:38AGITATOR REMOVAL—WHIRLPOOL WASHER - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you get it spun out you can just reach in from the bottom and grab the bottom part of theMoreOnce you get it spun out you can just reach in from the bottom and grab the bottom part of the agitator. And pull up probably good to reach in with two hands so you have a little bit more leverage.
How do you loosen the agitator bolt?
1:134:08How To: Whirlpool/KitchenAid/Maytag Agitator Bolt WPW10076270YouTubeStart of suggested clipEnd of suggested clipOnce you have the socket on the agitator you'll notice that it spins the whole tub. So you're gonnaMoreOnce you have the socket on the agitator you'll notice that it spins the whole tub. So you're gonna have to reach down and hold it while you break the bolt. Free.
How do you get a stuck agitator off?
ANSWER: To remove a tightly-fitted agitator or one that has become firmly glued in place by soap residue, first unplug the washer and remove the agitator cap. Then, if there is room between the bottom edge of the agitator and the tub bottom, work a completely deflated bicycle tire in underneath the agitator.
How do I clean my washing machine agitator without removing the agitator?
1:517:15How To Properly Clean Your Top Load Washer | PartSelect.comYouTubeStart of suggested clipEnd of suggested clipTo clean this we would suggest soaking that in as hot water as you can and use either a baking sodaMoreTo clean this we would suggest soaking that in as hot water as you can and use either a baking soda or vinegar or a combination of both solution.
What a Washing Machine Agitator Is
The agitator is located in the center of the washing machine drum. It is responsible for agitating or moving the clothes in the water-filled drum.
When to Remove a Washing Machine Agitator
Composed of two pieces of solid plastic, the washing machine agitator is so durable that it rarely breaks. But sometimes it needs to be removed and replaced to take care of a different problem.
Safety Considerations
Always unplug the washing machine before working on the agitator to prevent the agitator from accidentally spinning.
Troubleshooting Washing Machine Agitator Removal
For tangled clothing or sheets at the base, determine the direction of the machine's spin cycle. Hold the drum steady with one hand. With the other hand, spin the agitator in the opposite direction of the machine's spin cycle.
When to Call a Professional
Corroded or rusted parts may prevent you from removing the agitator bolt or the entire agitator. If you cannot do either without the risk of stripping the bolt or breaking the agitator, call an appliance repair expert for help.
