- Troubleshoot the Problem. Some problems are easier to identify than others. ...
- Gather Your Tools. In order to remove the hose, you will have to take the washer apart. This will require a screwdriver.
- Prepare the Washer Installation Area. Carefully pull the washing machine out from the wall far enough that you have room to work. ...
- Drain the Water. If you have a wet/ dry vacuum, use that to suck up any water in the bottom of the washing machine drum.
- Disassemble the Washing Machine. Consult the manual or examine the washer to find the screws holding the body together. ...
- Remove the Hose. At the point where the washing machine hose meets the drain, you will find the washing machine hose clamp.
How do you drain a washing machine hose?
The most efficient way to drain the water is to open up the washing machine so that you can get to the hose. Washing machines are not all built exactly the same way, so if you have the manual for yours, now is the time to get it out and see how to disassemble the washing machine's body.
How do you remove a stuck hose from a toilet bowl?
Use the slip-joint pliers to squeeze the tabs sticking out of the clamp to open it. Slide the clamp along the length of the hose to get it out of your way. Place a towel, bowl or small bucket under the drain pipe to catch any water and pull the hose free of it.
How do you get water out of the bottom of washing machine?
If you have a wet/ dry vacuum, use that to suck up any water in the bottom of the washing machine drum. You can also bail the water out using a small bucket or clean, empty coffee can. The most efficient way to drain the water is to open up the washing machine so that you can get to the hose.
How do I remove the hose from my Kenmore Elite washer?
There should be a pair of faucet handles at the back of your washer installation. Turn them both all the way to the right. In order to remove the hose, you will have to take the washer apart. This will require a screwdriver.
How do you remove a washing machine drain hose from the wall?
0:134:19How to Change the Drain Hose on a Washing Machine (Zanussi)YouTubeStart of suggested clipEnd of suggested clipWith the top out the way I next need to remove the grommet that holds the drain hose into position IMoreWith the top out the way I next need to remove the grommet that holds the drain hose into position I do that by undoing the screw. Underneath. With the grommet unscrewed.
How do you remove a washer drain hose?
0:042:20Whirlpool Washer Repair - How to Replace the Drain Hose ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen using a pair of pliers we're simply going to squeeze that spring clamp. And just slide it up onMoreThen using a pair of pliers we're simply going to squeeze that spring clamp. And just slide it up on the hose. Bit. And twist that hoe to pull it off of the pump.
What tool do I need to disconnect washer hoses?
You may need to use adjustable pliers or a pipe wrench to loosen the hoses, especially if the machine hasn't been disconnected in a while. Once you've removed them, drain any remaining water into the bucket.
How do you unscrew a tight washer hose?
0:385:16How to Disconnect Your Wash Machine Hoses-Plumbing - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's going to squeeze that that piece down on to the hose bib and you're never going to get it offMoreIt's going to squeeze that that piece down on to the hose bib and you're never going to get it off no you want to grab it. Right here on this outer edge to try to turn that's why these serrations.
How do I remove the drain hose from my Whirlpool washer?
0:060:52Whirlpool Top Load Washer Replace Drain Hose #W10221546 - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo replace the drain hose on your washer first use pliers to release the clamp securing the oldMoreTo replace the drain hose on your washer first use pliers to release the clamp securing the old drain hose. And pull it off of the rear panel.
How do you change a washer hose?
0:361:34How to Replace Washing Machine Hoses - YouTubeYouTubeStart of suggested clipEnd of suggested clipTurn off the water supply valves. Usually located behind the washing. Machine disconnect the oldMoreTurn off the water supply valves. Usually located behind the washing. Machine disconnect the old hoses. First from the washing machine and then from the valves.
How do you loosen a tight water hose?
2:225:33Garden Hose Stuck to Spigot? Here's the Best Way to Remove It! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd open that pry that open and hopefully my channel locks or tongue and groove pliers will allow meMoreAnd open that pry that open and hopefully my channel locks or tongue and groove pliers will allow me to unscrew it at that point you take your screwdriver.
How do I remove the drain hose from my Maytag washer?
2:447:15Maytag Washer Repair - How to Replace the Drain Hose - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust tilt that bracket over from the bottom. And I'll hook the two tabs at the top. We're gonna pullMoreJust tilt that bracket over from the bottom. And I'll hook the two tabs at the top. We're gonna pull that drain hose.
Finding The Right Replacement Part
To find a compatible drain hose for your washer, type your appliance’s model number into the search bar at AppliancePartsPros.com. We’ve got genuine OEM parts for every major brand, and they’ll be delivered to your door in just a few days.
How To Replace A Washer Drain Hose
When preparing this tutorial, we replaced the drain hose on a Samsung top-loading washing machine. This is a quick and easy job, and the steps outlined here will likely line up with most other brands and models of washer. However, you may find that the drain hose is secured in a different location on your washer.
Wrapping Up
If you follow our guide, in just a few minutes you should be back to a laundry day free of fears of puddling water.
What to do if your washer is full of water?
If you find your washer full of water even though the cycle has ended, you may need to replace the washing machine drain hose. Before you can put on the new one, you have to remove the old one. This is neither a complicated nor overly delicate task, so even beginners should not be afraid to dip a toe into the world of do-it-yourself repairs.
How to stop a washing machine from leaking water?
Either way, your first step is to turn the machine off if the water is spurting or leaking. Unplug the washing machine, making sure that you don't drop the plug into any standing water. Turn the water off. There should be a pair of faucet handles at the back of your washer installation. Turn them both all the way to the right.
How do you hide the valves and drain hoses behind the washer?
I am wanting to put a countertop above my front load washer and dryer, but I am stumped as what to do with the back wall that has the water lines and drain hose that is above the washer. They can not be moved.
Comments (9)
If you put a countertop above your washer and dryer how do you access the water lines, drain hoses and shutoffs?
What to do if there are no drains?
If there are any additional open knockouts that are not connected to drains, cover them with tape and a note reading "No Drain" to prevent someone from fitting the drain hose into the knockout. Always turn off the water when working on plumbing projects. Properly configuring the hookups for your washing machine is vital to avoiding leaks. ...
Can you get a knockout plug stuck in a drain?
Some Oaty outlet boxes are designed with knockout plugs that won't get stuck in the drain trap, but it's best to avoid dropping the knockout plug into the drain. It could get stuck where there's existing blockage or a tight bend or other snagging point in the drain line.
