Receiving Helpdesk

how do you remove a rapid fit drain stopper

by Dr. Anibal Boyle PhD Published 3 years ago Updated 2 years ago

How do you remove a rapid fit drain stopper?

  • Lift the stopper to the open position.
  • Hold the stopper body firmly by hand, and twist the knob counterclockwise to remove it.
  • With the cap removed, unscrew the mounting post beneath the cap counterclockwise to separate the stopper from the drain fitting.

Part of a video titled How to Remove any Bathtub Stopper, Pop-up, Grate, or Plug
0:00
1:38
It it'll sometimes be a set screw right here you'll take your screwdriver loosen that screw. AndMoreIt it'll sometimes be a set screw right here you'll take your screwdriver loosen that screw. And then this part will separate from the metal bar. And you just unscrew that metal bar.

Full Answer

How do you remove a stuck drain stopper?

Rotate the flat tip of the screwdriver counter-clockwise to unscrew the screw and release the stopper from its position in the drain. You don’t have to remove the screw from the stopper, it simply has to be loose enough to lift.

How do you remove a trip level drain stopper from a tub?

Use a screwdriver to loosen the screws on the overflow grate and remove the grate from the tub or sink in order to access the trip-level drain stopper assembly. Make sure to put the screws in a safe location for reinstallation.

How do you use a Danco drain stopper?

The easy-to-install DANCO 3/8 in. plastic drain stopper features a secure fit. It is designed to help prevent your bathwater from disappearing down the tub drain. Push down on the cap to close and slow the drain of water. Push again to open. You will need Adobe® Acrobat® Reader to view PDF documents.

How do I replace the drain stopper on my Kenmore washer?

Just turn the entire drain stopper to the right (counterclockwise) to unthread the bolt from the crossbar and lift out the drain stopper. Clean off any loose hair and debris in order to properly inspect the drain stopper for any damage. Look for clear signs of tears, rusting, or advanced wear and replace the drain stopper if necessary.

How do you unscrew a drain stopper?

Push and PullWith the stopper in the open position, unscrew the knob from the stopper base.Push the stopper closed to reveal the center post.Use pliers or a flat-head screwdriver in the center to loosen the slotted screw inside the center post in a counterclockwise direction.Lift the stopper from the drain.

How do I remove a lift and turn drain stopper?

0:401:49How to remove a lift and turn stopper - YouTubeYouTubeStart of suggested clipEnd of suggested clipWell try not to loosen the the top of it. But as you rotate counterclockwise the stopper itself willMoreWell try not to loosen the the top of it. But as you rotate counterclockwise the stopper itself will loosen from its base as you'll see here.

What is a flip it drain stopper?

Flip-It drain stoppers are a proprietary design that operates much like a commercial wine cork device used to seal wine bottles after they have been opened. The toggle lever expands the shaft of the stopper to seal a pair of O-rings and block the drain.

When to remove a bathtub drain stopper?

Removing the stopper is the first step to addressing these problems. You may also need to remove the stopper when working on the drain, such as when replacing the drain strainer body, or when addressing a clog . There are many styles of bathtub drain stopper, and the techniques for removing them for cleaning or replacement varies quite a bit ...

What is a toe touch drain stopper?

Perhaps the simplest stopper of them all, toe-touch drain stoppers are spring-loaded devices that operate with a simple push of your toes. One push down closes the stopper; the next toe-touch allows it to spring up again. These stoppers are very easy to remove and clean.

Why does my bathtub drain stopper not hold water?

When a bathtub drain stopper fails to hold water when closed, or when the tub drains too slowly when the stopper is in the open position, the culprit is usually a hair or soap buildup on the stopper, or a stopper that is worn out and in need of replacement. Removing the stopper is the first step to addressing these problems.

How do I repair a tub drain?

In order to repair or clean your tub’s drain, you first have to remove the stopper. While there are several kinds of tub stopper, a pair of pliers, a screwdriver, and a suction cup are the most you’ll need to have the stopper disassembled in just a few minutes. Steps.

What is a toe touch stopper?

This kind of stopper is called a toe-touch stopper, since you can simply press on it with your foot to open and close it . Toe-touch stoppers are one of the simplest to use, but they can be difficult to remove without the right approach. ...

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9