How do you remove a mobile home shower?
- Turn off Water. Shut off the water in the doublewide mobile home.
- Cut the Drain. To remove the shower from the doublewide, you'll first need to cut the drain line that leads to the shower.
- Disconnect Water Lines.
- Remove Shower Surround.
Full Answer
How do you remove a tub from a mobile home?
There will be screws securing the lip of the tub to the walls. Remove these screws with the proper screwdriver. Once the screws have been removed, you should be able to pull out the tub. This step may require more than one person to maneuver the tub and then remove it from the mobile home.
Can you replace a shower faucet in a mobile home?
Shower faucets in mobile homes tend to combine the taps and spout into a single piece of hardware. This makes it a little bit easier and faster to replace shower faucets in a mobile home than in a traditional home. The only tool you'll need is an adjustable wrench.
How do I drain the water in my mobile home?
Turn off the main water supply valve that brings water into the mobile home. Open the hot and cold taps in the faucet and drain the water lines. If you forget this step you will be cleaning up water on the floor.
How do you support a mobile home bathtub?
In a mobile home, most tubs are supported either by plastic legs or by a polystyrene foam piece that fits into the bottom of the tub. Plastic leg support can cause noise when the tub shifts, but they leave the space under the tub open for piping.
How do you take off a shower?
0:497:27How To Remove a Fiberglass Shower Without Destroying the BathroomYouTubeStart of suggested clipEnd of suggested clipWork a pry bar between the sheetrock or in this case if we have room we'll do it on the floor - itMoreWork a pry bar between the sheetrock or in this case if we have room we'll do it on the floor - it keeps from poking chance of poking hole in the drywall. We're going to be real slow methodical.
How do you remove a mobile home bathtub?
4:198:40How To Remove Tub & Surround From Mobile Home - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what we're going to do next is pull the screws out that hold it and put phillips screws in inMoreSo what we're going to do next is pull the screws out that hold it and put phillips screws in in places. And then we'll pull this cover off. And probably pull the trim. Here here and over here.
How do you remove a fiberglass shower stall?
1:296:24How to Remove One-Piece Fiberglass Showers - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we took that off and the two screws that held the escutcheon in place and then finally remove theMoreSo we took that off and the two screws that held the escutcheon in place and then finally remove the shower arm by turning it counterclockwise. That gives you more space to operate.
How do you remove a plastic tub in a mobile home?
5:5216:11How to install a new bathtub in a mobile home - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe top piece all the way around is unscrewed. Okay we've taken out the faucet. And we've also takenMoreThe top piece all the way around is unscrewed. Okay we've taken out the faucet. And we've also taken out or pushed to the side the p-trap underneath of this hole on the other side of the wall there.
How do you move a shower drain in a mobile home?
1:059:06How to install a Center Drain Tub in a Mobile Home - YouTubeYouTubeStart of suggested clipEnd of suggested clipCut back from this tee a little bit. Cut in there right there and then the tub will come out thatMoreCut back from this tee a little bit. Cut in there right there and then the tub will come out that way or we can kind of demolish the drain we can cut around the drain right there.
How do you remove a 3 piece tub surround?
How to Tear Out Bathtub SurroundTake All Necessary Safety Precautions. ... Remove the Faucet Screws. ... Remove the Shower Head. ... Take Off the Tub Spout. ... Cut Rivets With a Utility Knife. ... Place the Utility Knife Between the Surround and Wall. ... Remove the Retaining Trim. ... Start Pulling at the Upper Right Corner.More items...
How do you tell if my shower is fiberglass or acrylic?
Look around the tub's edges and see if it appears thinner; this could be an indication that it is acrylic. Acrylic tubs usually come in more colors than fiberglass tubs, as fiberglass tubs are commonly white. Acrylic also feels warmer to the touch than fiberglass, and tubs made of acrylic have smoother finishes.
Can you tile over a fiberglass shower?
In most cases, you cannot tile on the floor of standard fiberglass/acrylic shower pans. Slight flexing will quickly crack the grout and even the tiles. However, some specialty shower pans such as those made by Tile-Redi are designed for over-tiling.
How do you remove shower stall and replace tile?
InstructionsStrip the Walls to the Studs. Remove everything in the shower alcove down to the studs. ... Install a Moisture Barrier. ... Install Cement Board Backer Panels. ... Mark Layout Lines. ... Install the First Row of Tiles. ... Continue Tiling Upward. ... Grout the Tile. ... Clean the Tile Surface.More items...•
Can I put a regular tub in a mobile home?
You have 2 options to combat the size difference if you want a standard bathtub: buy a bathtub specifically made for mobile homes or buy builder-grade acrylic tubs from a regular bathroom supply company and retrofit their products to fit.
How do you remove tub surround panels?
Starting at the top outside corner, tap the putty knife behind one of the corner panels and pry out the corner. Keep tapping the putty knife deeper until you can grasp the edge of the panel with your fingers or with pliers. Keep tapping and pulling until the panel comes off and then move on to the other corner panel.
What kind of tubs are in mobile homes?
Manufactured home bathtub style options include:Alcove tubs.Corner tubs.Oval tubs.Drop-in soaker tubs.Freestanding tubs.Whirlpool tubs.
How to stop a faucet from falling in a tub?
To prevent the faucet from falling into the tub and potentially chipping it, lay a thick blanket or towel in the tub before removing the faucet. However, faucets that have been in place for years might need a gentle tap with a mallet to pull free.
Where is the shut off valve located?
The shutoff valve is often located behind the access panel , but you can also turn off your home's main water valve. Open the bathtub taps to ensure the water has been turned off and drain any water remaining in the pipes. Next, use a wrench to loosen the nuts that attach the water supply lines and the shower line to the faucet stems.
Can you replace a shower faucet in a mobile home?
This makes it a little bit easier and faster to replace shower faucets in a mobile home than in a traditional home. The only tool you'll need is an adjustable wrench.
What is a mobile home bathtub made of?
Most mobile home bathtubs are made of plastic or fiberglass to keep the overall weight of the home as light as possible. They can be difficult to repair or touch up, because it's harder to work on a plastic basin than it is with the ceramic or porcelain models often seen in standard homes. Any cracks, dents or leaks may mean ...
Can you replace a tub in a mobile home?
A replacement tub of the same size can be installed right over the existing supports. In a mobile home, most tubs are supported either by plastic legs or by a polystyrene foam piece that fits into the bottom of the tub. Plastic leg support can cause noise when the tub shifts, but they leave the space under the tub open for piping.
