How do you remove a metal fence post from concrete?
- Step #1 – Dig around the post until 3-4″ of the concrete footing are exposed.
- Step #2 – Wrap a chain around the concrete footing of the fence post.
- Step #3 – Connect the chain to the High-Lift Jack.
- Step #4 – Crank the lever on the high-lift jack to lift the concrete out of the ground.
How do I remove a steel fence post?
Stop going crazy over how to remove fence posts
- Assemble Materials. To get started, you'll need a way to get a bite on the post and something to apply pressure. ...
- Get a Grip. If you're following along with Mike's method, attach the 2-by material to the side of the post, leaving about 2 inches of space between the nailer ...
- Weaken or Wet. ...
- Lift. ...
- Fill. ...
How to pull fence post out of ground?
- Dig a trench next to the footing and tip the post out.
- Wrap a chain around the post and use a high lift jack to pull the post out.
- Screw lag bolts through a chain into the broken off fence post and then use a vehicle winch/come along/high lift jack to pull the post out.
How to remove metal fence posts?
Pull out the post with heavy equipment.
- Rent a post puller from a heavy equipment rental company. Attach it to the post with a chain and push down on the lever to lift the pole vertically.
- Use a chain to hitch the post to a tractor or truck. ...
- You can also use a farm jack to remove posts. Wrap a length of chain around the fence post, and secure the other end to the lifting plate on the ...
Should I set my wooden fence posts with concrete?
Should fence posts be set in concrete? Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place.
How do you remove a metal fence post from a concrete slab?
Use the Jack for Removing Steel Fence Posts Put the end of the chain on the jack tongue and crank the jack. Keep a close eye on the chain to ensure that it doesn't slip or move. Once you lift the pole and slab enough, you should have someone help you lift them out of the ground and carry them away.
How do you remove a metal pole from concrete?
1:404:20Once you've got enough stuff dug up and you can drill some holes drill some holes. Again. Be safe ifMoreOnce you've got enough stuff dug up and you can drill some holes drill some holes. Again. Be safe if you've never drilled metal before it might very well be difficult.
How do you remove an aluminum fence post in concrete?
0:186:22So if you just go ahead yeah you get the right size spanner yeah and you just want to slide it inMoreSo if you just go ahead yeah you get the right size spanner yeah and you just want to slide it in just like this here. And just sweep it anti-clockwise.
How do you remove old metal fence posts?
0:051:45And then you use your weight to push back on this lever. And it slowly pulls the fenceless out ofMoreAnd then you use your weight to push back on this lever. And it slowly pulls the fenceless out of the ground once you make a little progress you move it down a little bit you only have a shot tape.
How do you remove an aluminum fence post?
0:0611:37Okay so what you're going to want to do is take your strap or rope or whatever I just happen to beMoreOkay so what you're going to want to do is take your strap or rope or whatever I just happen to be using a load strap from my truck and days what I do is I just make like a loop.
How do you remove old posts from concrete?
Tap the chisel head with the mallet to push it against the concrete; the impact will knock off pieces of debris. Increase the strength of the mallet's blows as you get comfortable chiseling. Move down the length of the post, removing all the concrete. Turn the post to chisel on the next side from top to bottom.
How do you get a metal pole out of the ground?
1:172:54So once the jack is in place just got tilt a little bit so the pipe wrench grabs. My pipe wrench hasMoreSo once the jack is in place just got tilt a little bit so the pipe wrench grabs. My pipe wrench has a bit some texture to it so it pretty decent you can see how. If you look at the ground.
How do you remove galvanized fence posts?
1:093:59What you do is you'll dig down on one side of that pole and as you dig down on this one side justMoreWhat you do is you'll dig down on one side of that pole and as you dig down on this one side just dig it down a little bit then you'll grab the pole. And just rock it back and forth back.
How do you remove a broken fence post from concrete?
Step 1: Remove Old Wooden Post. ... Step 2: Dig around the perimeter of the posthole. ... Step 3: Break up the Concrete Footing. ... Step 4: Remove Remaining Concrete. ... Step 1: Dig around Posthole perimeter. ... Step 2: Insert Prybars. ... Step 3: Lever the Footing out of the Posthole. ... Step 1: Drill Pilot Hole into Post.More items...
How do you remove a fence post without a jack?
If you don't have a jack, (but you do have a helper) you can simply lift on both sides of the bar. Two strong workers lifting from their legs can pull up almost any fence post in this fashion.
How do you make a post puller?
0:175:01What I've done is drilled a hole on the end here and put a bolt through there and I've threadedMoreWhat I've done is drilled a hole on the end here and put a bolt through there and I've threaded through some chain here now what I'm gonna do is just slip this down over the top of the tee post.
How do I remove a steel fence post?
Step 1 - Prepare. Start by using your shovel to dig around the steel fence posts and the concrete. This will make it easier for you to remove them later. Dig all the way down to the bottom of the concrete. Wear gloves for digging and then try moving the steel fence posts backward and forward to loosen them a little.
How do I remove concrete from steel posts?
To remove the concrete from the steel posts you’re going to need to use a sledgehammer. Put on heavy gloves and safety goggles. Use goggles rather than glasses. There’s no way to avoid heavy work with this. You have to keep bringing the hammer down to chip off the concrete.
How do I tighten a chain around a fence post?
Loop the chain around the posts as low as you can. Put each end of the chain on the tongue of the jack. Start to crank the jack. As you do so the chain will tighten around the steel fence posts. Keep checking to ensure the chain doesn’t slip. If it begins to, you should loosen the chain and reposition it.
Do you have to take out fence posts?
If you decide to move your fence, or even remove it altogether, you need to take out the fence posts . That’s going to cause a problem as you have to take out something that was meant to remain in the same spot permanently.
Buried Concrete
If your metal posts have been set in buried concrete, it's best to pull the concrete out with the each post, and with mechanical help, you can avoid excessive digging. Drill a 1/2-inch hole through each post -- about 4 inches above the ground -- and insert a length of 3/8-inch re-bar to provide a grip.
Concrete Pad
You may be able to lever or jack the posts out of a concrete pad -- especially if they extend all the way through the pad and the other end is free of protrusions. If this doesn't work, your only recourse short of breaking up the pad is to cut the posts flush with an angle grinder or reciprocating saw that has a metal-cutting blade attached.
Tools for Removing Fence Post Footings
48″ High-Lift Jack (This is better than any fence post jack you’ll find)
Learn 10 Profitable Handyman Services You Can offer WITHOUT a Contractors License
Stop waiting and start making money. Download this short PDF where I reveal ten of my most profitable, in-demand services that you can start offering today.
How do you remove concrete from metal posts?
To remove the concrete from the steel posts you’re going to need to use a sledgehammer. Put on heavy gloves and safety goggles. Use goggles rather than glasses. There’s no way to avoid heavy work with this.
How do you remove concrete from fence posts?
Tap the chisel head with the mallet to push it against the concrete; the impact will knock off pieces of debris. Increase the strength of the mallet’s blows as you get comfortable chiseling. Move down the length of the post, removing all the concrete. Turn the post to chisel on the next side from top to bottom.
How do you remove dried concrete from aluminum?
Pour some sugar in a small bowl and add enough water to make a thin paste.
Can you reuse fence posts with concrete?
ARB1977. If the poles are out of the ground, hit the concrete with a sledge hammer a couple times and it comes right off. Some of those older poles are nice and heavy gauge (not like the thin ones sold now) and if not totally rusted are perfect to reuse.
How do you remove a metal fence post with a car jack?
Step 1: Clear the Area Around the Post and Get Your Tools Ready. You need to ensure clear solid ground around the post.
How do you fix a wobbly mailbox post?
Choose firm materials, such as rocks, cut-down cedar shingles, or even mixing concrete. Using a level, move the post so that it is straight up and down. Wedge materials next to the post to fill the gaps, ensuring the post stays straight. Once secure, pour sand inside the hole to fill any remaining gaps.
Do you need concrete for mailbox post?
Most mailbox post installations require a 60 lb. bag of dry concrete. Pour a little more water on top of the concrete mix. The concrete mix in the ground will soak in both the water you poured earlier as well as the water from the top.
How do you remove a metal fence post from concrete?
To remove a metal fence post set in concrete, you can pry it out with a car jack, tractor, or lever made from lumber. If it’s set in continuous concrete, you may need some heavier machinery, like a jackhammer.
Will fence posts rot in concrete?
A: Actually, your point is well taken. Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. The concrete at the top should be sloped away from the post to grade level to avoid water pooling around the base.
What is a post puller?
An electric vehicle having a powered drum for handling wire rope used to pull mine props after coal has been removed; used for the recovery of the timber.
How do you remove an aluminum fence post?
In that, Yes, the post can be removed by digging it out and pulling it upwards Before you pull upwards make sure the screws going into the ends of the sections are removed on both sides of the post. Then as you pull the post up the sections will go with it until they break free
Is 2 feet deep enough for fence posts?
Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/ 2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet ).
How long will a pressure treated post last in the ground?
3) A deck built with pressure treated wood will last a long time. Promotional literature promises lifelong performance for pressure treated wood. The Forest Products Laboratory and other research groups have shown that treated wood stakes placed in the ground for more than 40 years remain rot-free.
Should you use concrete for fence posts?
Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Using premixed concrete rather than dry concrete will ensure ultimate security. While concrete is sturdy, it lacks the drainage of gravel and can trap moisture, ultimately leading to rot.
How many feet of post and concrete below ground?
Add to that any code requirements to accommodate the frost line, and you may have three feet of post and concrete below ground. The trick to removing a fence post is to apply force upward, so that you're not fighting the strength of the earth on either side of the buried post.
Can a concrete jack be pulled from concrete?
Second, consider the width of the concrete pier when you set the jack. If your jack is sitting on top of the concrete, all you'll be attempting to pull the post from the concrete, which will be nearly impossible.
Can you pull a fence post by hand?
But no matter which approach you choose, a little bit of prior thought can save you a lot of effort in the long term.
Step 1 - Prepare
Step 2 - Use A Farm Jack
- You should hire or buy a farm jack, also known as a high lift jack, in order to remove the steel fence posts. You need to place it on a flagstone next to the steel post you’re removing from the ground. The tongue of the jack should be facing toward the post. Place it on a flagstone for two reasons: it distributes the weight, and it also stops the jack sinking into the ground.
Step 3 - Lift
- Your chain needs to be heavy for the weight and force. The metal in each link should be ¼ or more in diameter. Loop the chain around the posts as low as you can. Put each end of the chain on the tongue of the jack. Start to crank the jack. As you do so the chain will tighten around the steel fence posts. Keep checking to ensure the chain doesn’t slip. If it begins to, you should loosen th…
Step 4 - Remove Concrete
- To remove the concrete from the steel posts you’re going to need to use a sledgehammer. Put on heavy gloves and safety goggles. Use goggles rather than glasses. There’s no way to avoid heavy work with this. You have to keep bringing the hammer down to chip off the concrete. You will eventually remove most of the concrete from the steel fence posts. To finish off the job you sho…