how do you remove a honda lawn mower blade

by Prof. Stone Rippin I Published 3 years ago Updated 3 years ago

How do you remove a Honda lawn mower blade?

Disconnect the spark plug.
Tip mower on it's side being sure that the air filter and carburetor are facing up.
Wedge a piece of wood between the blade and deck, then unscrew the blade bolts with a socket wrench, once they are loose, thread them out by hand.

Part of a video titled HRX217 Lawn Mower Blade Replacement - YouTube

0:44

3:11

Use a block of wood to stop the blades from turning. While you loosen the mounting bolts. Do notMoreUse a block of wood to stop the blades from turning. While you loosen the mounting bolts. Do not remove the center bolt.

Full Answer

How to replace the blade on a lawn mower?

How to Replace a Lawn Mower Blade

Remove the spark plug wire so that there’s absolutely no way the engine can jump to life. ...
Put on heavy work gloves. Secure the lawn mower blade by lodging a 2x4 block between it and the mower deck.
Once you’ve removed the blade assembly, take a picture of it with your phone so that you know the right way to put all the parts back together ...

More items...

How to reinstall carburetor on a Honda lawn mower?

First, remove the air filter. If it is dirty, replace it. ...
Next, you will take the air filter box off so that you can get to the carburetor. In most models, it is held on by two bolts. ...
Now that you have access to the carb, get ready to start taking pictures. ...
Once you have taken the carburetor off, it is time to disassemble. ...

Why buy a Honda lawn mower?

Honda HRN216VKA lawn mower: key specifications

Deck cutting width: 21 inches
Power source: Gas
Cutting height range: 7 adjustments ranging between 1–4 inches
Self-propel speed: 0–4 mph
Bag capacity: 1.9 bushels
Weight: 82 lbs
Wheel size: 8 inches
Warranty: 3 years

How to change your lawn mower blade?

You may choose to have a professional sharpen your blades because:

It is a safer option to sharpening the blade yourself
Sharpening a blade is often less expensive than purchasing a blade
A professional can grind down mower blades to get rid of large nicks and gouges in the steel
Blade is properly balanced. This will reduce vibration and damage to your mower deck.

Are Honda mower blades reverse thread?

Are Honda Lawn Mower Blades Reverse Thread. Honda mowers use a two-blade system that gives your lawn a very smooth, even cut, but all Hondas are standard threaded and not reverse.

Which way do you unscrew the bolt on a lawn mower blade?

To remove the blade, you must turn the blade's retaining bolt to the left, or counterclockwise. Before undoing the blade, tip the mower on its side with the engine air cleaner facing up and block the blade with a piece of wood so it can't turn.

How do you remove a stubborn lawn mower blade?

Remove a Stuck Blade with Leverage

Once it's secure, place a socket wrench over the bolt, (making sure it is the correct size), and attach the breaker bar to the socket. Use the breaker bar as the socket wrench handle and loosen the bolt. Once it is loose, unthread the bolt by hand and remove the blade.

Which way does a Honda lawnmower blade spin?

Most lawn mower blades rotate in a clockwise direction (counter-clockwise when viewed from below), and as such have the cutting edge on the right side. If you are unsure of how your mower rotates, check the position of the discharge chute; if it is on the right side angled back, the blade turns clockwise.

Are lawn mower blade bolts left hand thread?

No. According to the Cub Cadet website, the bolt holding the mower blade in place is threaded in the normal fashion. That is, turn it right (clockwise) to tighten it, and turn it left (counterclockwise) to loosen it. These bolts typically have a 5/8 inch thread and need to be tightened to 70-90 foot pounds of torque.

How do you tell if your lawn mower blade is upside down?

If on the right side, move the blade in a counterclockwise direction, and if on the left side, move it in a clockwise direction.) When doing this, this sharp edge of the blade should be the edge that leads. If it does, then you have the correct lawn mower blade position. If not, you need to flip it over.

How do you remove the blades from a lawn mower deck?

Turn the nut (or bolt) counterclockwise to remove it from the mandrel shaft, then allow the blade to drop off. For blades that are tightly seated, you may have to pry the blade off or work it up and down to loosen it after the nut is removed.

How do you change a blade on a lawn mower without removing the deck?

How To Change Blades On Riding Mower Without Removing Deck (Step-By-Step)

Check The Condition Of The Blades. The first thing you'll want to do is check the condition of the blades. ...
Park Your Mower. ...
Take Out The Spark Plug. ...
Lift The Mower With A Jack. ...
Take Out The Mounting Nut. ...
Put The New Blade On.

Feb 19, 2020

How do you loosen a frozen lawn mower blade?

Part of a video titled How to remove a lawn mower bolt stuck (DIY Guide) - YouTube

0:11

4:42

By you just use an old shirt cover the wall more blade itself that way you don't cut. It. Find aMoreBy you just use an old shirt cover the wall more blade itself that way you don't cut. It. Find a bowl metric 16 and remember that it's gonna unscrew counterclockwise.

Which side of the lawn mower blade is up?

To determine which side of your lawn mower blade is up, first figure out which side is the sharp cutting edge, and which side is the blunt edge. Look for a sticker indicating which side goes up and which side faces downward. The cutting edge should face the grass while the dull edge should face the deck of the mower.Jun 4, 2021

How do you know which side of a lawn mower blade is up?

The most common and easiest way to tell which side of your lawn mower blade is up, is to look for the label. Most manufacturers will stamp at least one side of the blade with a direction label. These can say things like: “This Side Up”, “This Side Down”, or “This Side Toward The Grass”, depending on the brand.Apr 8, 2021

What is the correct way to install a lawn mower blade?

It's important that the blade's cutting edge follows the direction of rotation. The wings of the lawn mower blade will be oriented up toward the mower deck, and any writing on the blade will likely be facing away from the deck. If the blade bolt comes with a washer, its concave side will be facing the blade.Apr 2, 2022

What side is the tip mower on?

Tip mower on it's side being sure that the air filter and carburetor are facing up.

Can you start a lawn mower without a blade?

One may also ask, can you start a lawn mower without the blade? Yes you can run an engine with out a blade . No problem though as posted it is surprising how much flywheel effect the blade adds and most of the noise is from the blade.

How to stop a lawn mower blade from turning?

Place a piece of wood between the blade and mower housing to prevent the blade from turning when you loosen the bolts. Don’t skip this step.

Which way to remove bolts?

You will use a wrench or socket tool to remove the bolt in a counterclockwise direction .

How long does a lawn mower blade last?

The good news is the average lawn mower blade lasts for approximately 200 to 300 hours of mowing.

Do you need a jack for a push mower?

This is the main difference in changing both lawn mower blades; a push mower does not require a jack.

Do you need a jack to change the blade on a riding lawn mower?

Changing the blade on a riding mower is slightly different and more work than changing that of a push mower. Since a riding lawn mower is much larger, you will need a jack to raise the lawn mower to access the blade.

Receiving Helpdesk