2005 nissan altima 2.5 idle relearn procedure: Insert key into ignition. Turn key to "On" position.
How to do a Nissan Altima idle learn?
How to Do a Nissan Altima Idle Relearn. 1 Step 1. Without stepping on the gas pedal, turn the ignition switch to on and wait at least two seconds, then turn the ignition switch off and wait 10 ... 2 Step 2. 3 Step 3. 4 Step 4.
When to perform a Nissan idle relearn procedure?
If you’ve performed a major repair, disconnected the battery, or disconnected a MAF sensor while the engine is running, you may have to perform a Nissan idle relearn procedure (also called an idle air volume relearn procedure).
How do you fix the malfunction light on a Nissan Altima?
Pedal to the floor, then full release. After the 5 pedal presses, wait 7 seconds and depress the accelerator pedal to the floor again and keep it there for approx. 20 seconds until the malfunction light stops blinking and turns ON steady. Release the accelerator pedal within 3 seconds after malfunction light stops blinking and turns ON steady.
Does the 2003 Nissan Altima have an electronic throttle body?
In 2003 the Nissan Altima came equipped with an electronic throttle body. Whenever you disconnect the battery or replace the computer or throttle body, you must perform a relearn procedure.
How do I reset my Nissan idle?
2:093:20NISSAN ETB idle and volume relearn procedure - YouTubeYouTubeStart of suggested clipEnd of suggested clipTurn the ignition switch on and wait three seconds immediately after the three seconds theMoreTurn the ignition switch on and wait three seconds immediately after the three seconds the accelerator pedal must be pressed and released five times within five seconds.
How can I make my car idle relearn?
0:403:26Idle Relearn Procedure After Battery Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhat you have to do is circle. The key twice. Before. So it's in the off position right you circleMoreWhat you have to do is circle. The key twice. Before. So it's in the off position right you circle the key once twice. And then you put your foot on the brake. And then you start the car.
How do I reset my idle throttle?
Turn ignition switch “ON” and wait at least 2 seconds. Turn ignition switch “OFF” wait at least 10 seconds. Turn ignition switch “ON” and wait at least 2 seconds. Turn ignition switch “OFF” wait at least 10 seconds.
How do I do the throttle body relearn procedure?
0:392:05GM Truck Electronic Throttle Body (ETB) Relearn Procedure - YouTubeYouTubeStart of suggested clipEnd of suggested clipNext turn the ignition off for 60 seconds. Then start and idle the engine in Park for 3 minutesMoreNext turn the ignition off for 60 seconds. Then start and idle the engine in Park for 3 minutes again after the 3 minute runtime the engine should be idling normally.
How do I relearn idle speed?
To complete the idle relearn:Bring the engine to normal temperature, have the accessories off.Leave idling for 2 minutes in Park/Neutral to learn.With the vehicle securely held on the brakes or wheel chocks, change into Drive.Leave idling for 2 minutes in Drive to learn.Turn the Air-conditioning on full if fitted.More items...•
How long does it take a car to relearn idle?
You would need for at least 10 minutes of idle time to reset the ECU when the car will not run.As soon as the engine starts, the idle moves down, and the data from sensors is collected for the ECU, the system will restart.
How do you reset the throttle body on a Nissan?
1:162:41NISSAN Electronic Throttle Body [ETB] | EASY RE-LEARN ProcedureYouTubeStart of suggested clipEnd of suggested clipTurn on the ignition without starting the engine and wait for three seconds fully press and releaseMoreTurn on the ignition without starting the engine and wait for three seconds fully press and release the accelerator pedal. Five times within five seconds.
What is idle learn procedure?
An idle relearn procedure is a way to reprogram the vehicle's computer memory to idle at a specified RPM, or revolutions per minute. Without the programmed idle, the vehicle can run arbitrarily, resulting in unnecessary engine wear.
How do you reset throttle body after replacing?
Leave the key off for a moment, turn the key to the "On" position again, wait 3 seconds, and press the accelerator 5 times in 5 seconds. Wait 7 seconds, and hold the accelerator down. The check engine light should start blinking, continue to hold pedal down until it stops blinking. You can then start the car.
What is idle relearn Nissan?
If you’ve performed a major repair, disconnected the battery, or disconnected a MAF sensor while the engine is running, you may have to perform a Nissan idle relearn procedure (also called an idle air volume relearn procedure). First, precondition the vehicle: Idle relearn cannot be done if any of these items are out of spec or are missing ...
How long does it take for the accelerator pedal to stop blinking?
After the 5 pedal presses, wait 7 seconds and depress the accelerator pedal to the floor again and keep it there for approx. 20 seconds until the malfunction light stops blinking and turns ON steady.
Can you idle relearn a car?
First, precondition the vehicle: Idle relearn cannot be done if any of these items are out of spec or are missing for even a second during the procedure.
