Rekeying your Kwikset Smart Key Lock with No Working Key
- Step 1 – Remove the Locks from the Door. You do this by removing the two screws that hold the outer and inner lock...
- Step 2 – Freeing the Cylinder from the Housing. The lock cylinder of your Kwikset Smart Key Lock should slip from the...
- Step 3 – Pull the Lock Cylinder out of the Housing. Carefully pull the lock...
How to factory reset a Kwikset smart lock?
– Slide up the cover to open the back of your lock, exposing the buttons beneath. – Push and hold the reset button for 10 seconds, until the lock beeps. – The light ring will flash red, then spin amber. – The lock has now been restored and is ready to be set up again.
How do you open a Kwikset lock?
You can pick a Kwikset lock with a bobby pin by making use of the following steps:
- Get a bobby pin and fold it into an L shape.
- Put the bobby pin in the center of the lock.
- Keep pushing it until you feel the lock open.
How to create a master key for a Kwikset lock?
- Select a Preset
- Enter cuts for the Top Master Key
- Enter cuts for the Control Key (if applicable)
- Enter cuts for the first Master Key or Change Key
- Press the Calculate Button
How to repair a Kwikset door lock cylinder?
Things You'll Need
- Lock re-keying kit
- Paper clip
- Phillips-head screwdriver
- Needle-nose pliers
Can I rekey a Kwikset lock myself?
Re-keying SmartKey locks requires only three items and entails three easy steps. Users must have their functioning key, a SmartKey Learn Tool, and a new Kwikset key. First, insert the functioning key and turn it ¼-turn clockwise. Then, insert and remove the SmartKey learn tool.
How do I reset my Kwikset smart key without a current key?
1:595:26How To Reset Kwikset Smart Key Without the Current Key ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the first thing you need to do is to remove that ring that holding the tailpiece. You can useMoreAnd the first thing you need to do is to remove that ring that holding the tailpiece. You can use any tool that you have I'm using a special tool. And you remove that ring.
How do you rekey a Kwikset SmartKey deadbolt?
0:071:08Rekey a Kwikset Deadbolt - Smartkey Lock - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you can use the same key for both locks insert the original key that came with your deadbolt.MoreSo you can use the same key for both locks insert the original key that came with your deadbolt. Into the cylinder. And turn it 90 degrees then fully insert the re-keying tool into the slot.
Can Kwikset locks be rekeyed to any key?
So it is impossible to slide a Kwikset key into a Schlage lock and a Schlage key into a Kwikset lock. These two locks cannot be rekeyed to match an existing key of the other....Table: Lock Brands that May Use the Same Key.Brands that Work With Kwikset KeysBrands that Can Work With Schlage KeysDefiantDexter4 more rows•Oct 9, 2020
How do you reset a Kwikset SmartKey door knob?
How do I reset a code on my Powerbolt?Insert functioning key & turn 1/4 turn clockwise.Insert & remove the SmartKey learn tool. Remove functioning key.Insert new key & turn 1/2 turn counter-clockwise. Done. Your lock is now re-keyed! ""
How do I reprogram my Kwikset SmartCode?
How do I program my SmartCode 913 lock?Open the door.Remove battery cover.Press the program button once.Enter new user code.Press lock button.If programming is successful the keypad will flash green once, and you will hear one beep.
How do you reset a Kwikset deadbolt?
1 Factory ResetOpen your door.Extend the latch bolt.Slide up the cover to open the back of your lock, exposing the buttons beneath.Push and hold the reset button for 10 seconds, until the lock beeps.The light ring will flash red, then spin amber.The lock has now been restored and is ready to be set up again.
How do I change the key on my SmartKey?
0:161:26SmartKey SC1 Re-Keying Instructions | Kwikset SmartKey SecurityYouTubeStart of suggested clipEnd of suggested clipRotate the current key 90 degrees counter clockwise insert the smart key tool fully and firmly intoMoreRotate the current key 90 degrees counter clockwise insert the smart key tool fully and firmly into the smart key hole remove the smart key tool remove the current key without rotating.
Will any Kwikset key work with SmartKey?
A Kwikset SmartKey tool (One should've came with your lock, but if not, you can buy one on Amazon). The new (or rather, old) key that you want to use instead. This must be a Kwikset key, as Kwikset and Schlage keys are totally different from one another (and won't work in each other's locks).
Can you duplicate Kwikset smart keys?
Kwikset Model# 925 KEVO DB 11P Kwikset - Kevo Bluetooth Smart Lock - Venetian Bronze comes with only 1 set (2) of keys. Please visit a locksmith to have additional keys stamped. You can copy the hard key as you would any typical hard key.
Can you master key a Kwikset SmartKey?
Thanks to the two-cylinder Key Control Deadbolt with SmartKey Security, you can have one master key for all your units and unique keys for all of your tenants.
How to rekey a Kwikset smart lock?
Rekeying your Kwikset Smart Key Lock with No Working Key. Step 1 – Remove the Locks from the Door. Step 2 – Freeing the Cylinder from the Housing. Step 3 – Pull the Lock Cylinder out of the Housing. Step 4 – Remove the Plug from the Lock Cylinder. Step 5 – Before you Pull the Plug Completely Out of the Core.
What is the best way to rekey a lock?
A small tabletop desk lamp is a good choice. A magnifying glass that allows you to work with both hands. Have a pair of tweezers or another small instrument to manipulate the lock parts. Once you have your workspace and tools ready, it is time to rekey your lock.
What is a Kwikset cradle?
Kwikset makes a Smart Key Reset Cradle that can be purchased from locksmiths or on the internet. You must still remove the Smart Key Lock core from the housing but instead of disassembling it further, you put the core into the cradle. The cradle will instantly reset the cylinder to the position to learn a new key.
Can you use a Kwikset smart key to rekey?
Your Kwikset Smart Lock is now rekeyed and ready for use. Without the working key, you can’t turn the cylinder to the 90-degree position. You cannot use the Smart Key to rekey the lock.