How do you put grommet curtains on a hook?
- Step 1: Fold grommets down at top seam. First, lay your grommet curtain out, and fold the top panel (with the grommets) down at the seam.
- Step Two: Attach curtain clip rings. Second, attach curtain clip rings to your grommet panels.
- Step Three: Hang drapes on curtain rod.
- Step Four: Create crisp pleats from the folds.
Full Answer
How to add large grommets to curtains?
Measure, Mark and Cut
- Measure the length of the curtain rod; multiply the result by 1.5 to allow for the fullness of the curtains; and then divide the result by 2 for two ...
- Add 6 inches to the finished width of each curtain panel to allow for 1.5-inch, double-fold side hems.
- Measure vertically from the rod to the point at which you want the hem of the curtains to fall. ...
How to install Grommets in your curtains?
How to Install Metal Grommets in Drapes
- Lay a drape flat on a stable surface.
- Measure down 1 1/2 inches from the top of the drape with a see-through ruler and make a pencil mark on the surface of the fabric.
- Unroll a length of grommet tape. ...
- Measure down from the top of the drape at each vertical pencil mark. ...
How to get grommet curtains to hang correctly?
What You Need
- Curtain rod with brackets
- Screws
- Tape measure
- Level
- Screwdriver
- Pencil
- Wall anchors (optional)
How far apart do you put grommets on curtains?
While the correct spacing depends on several factors, ultimately you have to be satisfied with the look and drape of your curtains when they are hung from the grommets. Space grommets that are up to 2 inches in diameter approximately 4.5 to 4.75 inches apart, measured from the center of one grommet to the center of the next.
How do you put grommet curtains on track with hooks?
0:001:10How To Hang Grommet Curtains & Panels - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt couldn't be easier to install. You'll need a metal rod that matches the grommets on your drapeMoreIt couldn't be easier to install. You'll need a metal rod that matches the grommets on your drape and the diameter. You want is a one in three eighths or a one and a half inch.
How do you hang curtains on top of hooks?
1:102:48How to hang your curtains perfectly - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen fit the hooks as a rough guide approximately. Four to seven pockets apart or 7 centimetersMoreThen fit the hooks as a rough guide approximately. Four to seven pockets apart or 7 centimeters depending on fullness if you have too many hooks this will restrict the curtains running off the window.
Can you use curtain hooks on grommet curtains?
You won't need rings, clips or hooks because the hanging hardware is built in, making grommet panels one of the easiest and least expensive curtain types to hang.May 14, 2020
Can you hang grommet curtains with clip rings?
With your grommet panel laid out, attach the clip rings above each grommet. With the exception of each end (which I'll show you next), centre each clip ring in the middle of each circle. Spacing your clip rings evenly will ensure even folds when you hang your drapes.Nov 11, 2020
How do you hang curtains with rings and hooks?
0:003:48Hanging Curtains Using Ring Clips (easiest method) - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou're going to make the spacing a whole lot easier you put one at the end. Either end and one inMoreYou're going to make the spacing a whole lot easier you put one at the end. Either end and one in the middle. And then you have it so you're always going to get the spacing.
How do you hang curtains with metal hooks?
3:144:08How to Hang Pencil Pleat Curtains - CurtainsCurtainsCurtains - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you just take the hook. And put it into the ring on the bottom of the ring. And just go acrossMoreAnd you just take the hook. And put it into the ring on the bottom of the ring. And just go across one by. One. So you've enjoyed this video a bit helpful.
How do you hang grommet curtains without a rod?
Five Creative Ways to Hang Curtains Without RodsUpholstery tacks.Tension cables.Hook-eye screws and drapery pins.Staples and furring strips.Cabinet knobs.Feb 10, 2022
How do you pleat grommet curtains?
0:372:16How to Create Fixed Grommet Spacing - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou could use a cord. You can make a small banding out of the face fabric or the lining fabric.MoreYou could use a cord. You can make a small banding out of the face fabric or the lining fabric.
How to make a curtain with a hook?
Take the hook and insert the sharp side into the seam of the curtain. Push the hook up into the seam to make sure it is fully insert ed. Then continue the process and insert a hook into every seam. To make sure the hook is snugly in place, you can use a ruler or other hard object to push them up further.
What are hook curtains?
Curtains can be an essential design feature that really bring a room together. If you plan on opening and closing your curtains regularly to let light in or for privacy, then hook curtains are your best option. They're designed to slide back and forth easily, making them ideal for functionality.
How to tell how many hooks to use on a curtain?
Your curtains should have come with the hooks that you'll use to hang them. After you've counted them all up, divide that number in half. This will tell you how many hooks should go on each curtain. Remember that curtain hooks are sharp at one end.
How to measure for hooks on curtain rod?
Measure 1/2 inch down from the top of the curtain. Your curtains should be level with the curtain rod, so you shouldn't insert the hooks at the very top. Instead, measure about 1/2 inch down and make a mark there. That's where the top of your hook should rest when it's inserted.
Can you hold curtains with two people?
This is a lot easier with two people. One person can hold the weight of the curtains while the other attaches the hooks to the rod. Double check to make sure no hooks have slipped out while you were lifting the curtain. If there is a seam without a hook, you've lost one!
How to measure for grommet curtains?
STEP 1: Measure the width of your window . Once you have the width of your window frame, double it to know how wide your grommet curtains should be. If you were to only get the width of the window, it would look like a solid piece of fabric hanging in front of the window. By doubling the width you will have plenty of fabric to hang in neat, ...
What size rod do you need for grommet curtains?
What size rod do you need for your grommet curtains? Since you already know the width of your window, just add an additional 8 inches to that measurement for single windows or an additional 14 inches for double windows . The additional length allows for space on each side of the window for the fabric to hang when it is pulled to the sides. It also creates the illusion of a bigger window.
How tall should a grommet curtain rod be?
This will be the height of your curtain rod. Keep in mind that the standard length of grommet panels is 84”, although longer lengths are also available. Generally, grommet curtains just go to the floor.
How to measure for eyelet curtains?
If you don't want to measure, a rod with a width between 1 3⁄8 to 1 1⁄2 inches (3.5 to 3.8 cm) will probably work for most eyelet curtains.
Why are grommets important?
This is very important, because the number of grommets affects the way that you thread the curtain onto the rod. If the curtain has an odd number of eyelets, the edges of the curtain won't lay properly against the wall.
What is an eyelet curtain?
Eyelet curtains, also referred to as "grommet curtains," have holes along the top edge. These holes are finished with large grommets to prevent fraying and present a nicer finish. They are easy to install and do not require curtain rings.
How to measure for a window bracket?
Use a ruler to measure up and to the side of the window first. Next, place the bracket against the wall where you measured to. Place a level on top of the bracket to make sure that it is straight and not crooked. Where you measure to depends on where you want the bracket to hang.
Can you iron curtains from the front?
Iron the curtains from the front if they are creased. Read the washing instructions to find out what temperature setting you should use on the iron—or if you can iron the fabric in the first place. An alternative to ironing is steaming the curtains with a steamer.
Do you need to tie back curtains?
Eyelet curtains typically don't need to be tied back because of the way that they drape, but you can certainly install wall-mounted tie backs if you want to. Measure two-thirds down from the top of the window frame. Place the tie back bracket against the wall and mark the holes with a pencil.
How many clip rings per grommet panel?
Clip rings usually come in packs of 8, and you’ll need 8 clip rings per grommet panel. To achieve the fullness in the room photo above, I used six grommet panels – three on each side of my window. So I needed to buy six packs of clip rings.
How to keep drapes from looking short?
You’ll lose a few inches of drape length (when you fold the top seam down), so in order to prevent your drapes from looking too short, you can : (a) move your curtain rod down or (b) buy longer drapes ( e.g., 96 inches instead of 83 inches) which will then ‘puddle’ at the floor which is a really stylish look.
Can you make pleated drapes with grommets?
The fact is that these days, you can find gorgeous, affordable drapes at many home retailers. But most of them have grommets, which is not helpful if you’re aiming for a crisp, pleated look. The good news is that with this simple curtain hack, you can make pleated drapes from grommet curtains easily!
Where can I buy clip rings?
You can buy clip rings at fabric stores, and most home retailers that sell drapery. W ith your grommet panel laid out, attach the clip rings above each grommet. With the exception of each end (which I’ll show you next), centre each clip ring in the middle of each circle.
Do you need a sewing machine to make pleated drapery?
Like, as in, you do not need ANY sewing skills, and definitely not a sewing machine, to transform your basic, store-bought grommet panels into the look of custom-made pleated drapery.
