Basic Tips To Preserve Chainsaw Carvings
- Protect the wood from direct sunlight. Direct sunlight is not great for almost anything. ...
- When sealing the carving, make sure you cover everything. When sealing the carving, make sure you sealed every centimeter of the wood. ...
- Raise the carving from floor level. If the carving is standing directly on the floor, water could find its way to penetrate the wood. ...
- Check the wind schedule. If you live in a windy region just double-check how firmly your chainsaw carving can stand in one spot.
- Keep under covers when possible. Of course, you want to display your wood carvings. However, in best practice, it should be kept under the covers to be well preserved.
- Stir the sealer before applying it. A little tip for the people who are relatively new to working with wood. ...
- Avoid Using Cheap Sealer. Using a high-quality sealer is important, you don’t want to buy it just for the sake of buying it. ...
- Brush off the snow. Snow has a tendency to melt before it falls off the carving. This is actually much worse than it may sound.
Do chainsaw carvings need preservation?
Preservation will play a very large role in how well the wood carving looks, but the time until the wood deteriorates is mostly up to whether it is rooted or cut out and carved. There is a lot that you can do to preserve your chainsaw carving for as long as possible.
How often should I seal my Chainsaw carving?
The best practice for maintaining your chainsaw carving is to reapply the sealer/oil every two weeks for the first year and every 12 months for the following years. If you reapply the sealer every 4-6 weeks instead of the recommended 2 weeks, your carving will still be well sealed, however, not to its full potential.
How do I care for my carving?
Frequent drenching with water [irrigation, etc] increases the likelyhood of water damage so try to display your carving beyond the reach of your lawn sprinklers. Keeping it properly sealed [described below] is very important if displayed in a wet location or climate. Maintaining the finish.
How do you protect wood carvings in the desert?
Do not set your carving directly onto soil or grass. A pad of concrete, gravel or paving stones is better and will help protect the base from water and insect damage. Heat from either harsh desert sunshine or even the household heat [indoors] will dry the wood quickly which causes additional cracking.
How do you protect wood carvings?
If your carvings are placed outside, it is highly recommend that you coat it once a year with a good Spar varnish (ie. Helmsman, or other outdoor spar) to make it last for years to come. You may find that the clear coat will not need re-coating so often but it is good to maintain it anyway at least once ever 2-3 years.
How do you care for a wood carving chainsaw?
Tips to care for your wood sculptures.Keep out of direct sunlight or, if kept inside, away from a direct heat source.Keep from direct contact with the ground (it will wick water) or the floor (cedar can stain).Finish with several coats of good deck oil that contains an algaecide and UV inhibitor.More items...
What do you use to seal wood carvings?
10:5612:19Wood Carving Finish - A Beginners Guide with Tips and Techniques To ...YouTubeStart of suggested clipEnd of suggested clipLike this one right here i would highly highly recommend you start off with just the beeswax paste.MoreLike this one right here i would highly highly recommend you start off with just the beeswax paste. Super easy to use it's cheap it's non-toxic.
What oil do you use for wood carvings?
One of the most commonly used methods for caring for wood carvings is through the application of mineral oil as a sealant and stain. With the proper type of mineral oil and correct application methods, caring for your wood carvings is an easy process, and one that only needs to be performed once or twice a year.
How do I stop my chainsaw carving from cracking?
To protect your wood carvings from splitting, apply a clear coat to them every year. A simple yearly application of quality wood stain or clear coat will increase the life of your piece. The clear coat helps to protect the carving from damage caused by humidity and other factors.
How do you stain a chainsaw carving?
0:464:38Top Two Stains to use for Wood Carvings & Maintenace TipsYouTubeStart of suggested clipEnd of suggested clipClear satin or semi-gloss spar varnish or spar urethane. You can get this pretty much anywhere HomeMoreClear satin or semi-gloss spar varnish or spar urethane. You can get this pretty much anywhere Home Depot Brona any Minwax dealer it's really good it's a little expensive.
What is the best wood for chainsaw carving?
The best softwoods suitable for chainsaw carving are cottonwood and ponderosa. Although cottonwood is classified as a hardwood it is very soft and pleasant to carve, same as basswood being put in the “hardwood” category but still works as softwood for chainsaw carvers.
What does tung oil do for wood?
Originating from China and South America, tung oil—an extract from tung-tree nuts—is a natural drying oil that coats your fine wood furnishings with a transparent, wet finish. It enhances the color of your wood, offers excellent protection and is eco-friendly.
How do you polish wood carving?
The most popular way of polishing a wood carving is applying a polishing compound such as beeswax to the wood after you carved it. However, other alternative methods such as polishing with a Dremel, applying mineral oil, or polishing with lacquer spray, are also used depending on the purpose of polishing for your wood.
How do you apply linseed oil to wood carving?
0:5812:03Finishing Woodcarvings with Boiled Linseed Oil - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what you do is just put the boiled linseed oil in a jar squeeze in about an inch of the burntMoreSo what you do is just put the boiled linseed oil in a jar squeeze in about an inch of the burnt umber oil paint. And then mix it up really. Good that's a tip that i've read in uh mike shipley book.
Can you finish wood with olive oil?
While some people think that the use of olive oil might damage wooden furniture, it actually nourishes the wood and brings out its natural shine. It can be used to treat several kinds of wooden surfaces. From chairs and tables to wooden storage boxes, you can use olive oil and let it act as a varnish.
What is Danish wood oil?
Danish Oil is a wood finishing oil used to protect and nourish wood from the inside. There are many different types of Danish Oil available; that's because unlike Tung or Linseed Oil, Danish Oil isn't a naturally occurring oil, it's actually a blend of oils and so is open to interpretation by different brands.
Carve Me A Bear! Chainsaw Carving Lists Frequently Asked Questions Regarding Chainsaw Carvings
Will My Chainsaw Art Last? If you are interested in a piece of chainsaw art but are not sure how long it is going to last you might not be sure if you are ready. There are several circumstances that will determine the time that the art will last. One of them has to do with where you keep it and what you do to protect it.
Chainsaw Carvings Art Carved & Shipped from Las Vegas Nevada & Helena Montana
Carve Me A Bear! Chainsaw Carvings offers custom, one of a kind chainsaw carvings to delight everyone. Every carving is just a little different and unique in its own right! Contact us today to start your collection
What is a chainsaw sculpture?
Chainsaw sculptures are, for the most part, carved from whole diameter logs rather than a slice of a log. It's the nature of a log to check or crack as it dries.
How to keep a carved wood carving from water damage?
Do not set your carving directly onto soil or grass. A pad of concrete, gravel or paving stones is better and will help protect the base from water and insect damage.
Why is my wood carving cracking?
Heat from either harsh desert sunshine or even the household heat [indoors] will dry the wood quickly which causes additional cracking. Avoid these when possible or be prepared to renew the finish more frequently. Rain is not much of a problem for a properly sealed carving.
Can you paint spar varnish over satin?
Spar Varnish is available in Gloss [shiney] or Satin [no shine]. If your carving isn't shiney and you'd like it to be, paint on the gloss spar varnish right over the satin. Theft. Sadly, it happens on occasion... Report any stolen carvings to the police just as you would any other crime.
How to keep wood from getting stuck under sculpture?
To keep moisture from getting trapped under the sculpture, and to let the wood breathe out the bottom Place a couple bricks or a cement pad under them to prevent moisture damage.
Can you recoat chainsaw carving?
Every year or two you can recoat the carving to bring back to new and can help your carving to last year’s longer. If chainsaw carving is painted I normally use Tremclad flat paint that can be found at a local hardware store and the base is done with Sikkens cetol 1 natural.
