How do you multiply feet?
- Convert 5 feet to inches by multiplying 12 by 5: 12 * 5 = 60 inches.
- Add the number of extra inches: 60 + 7 = 67 inches.
- Perform the required multiplication:
- Convert to feet and inches by dividing by 12:
- The quotient (22) is the number of feet and the remainder (4) is the number of inches.
- Answer: 22 feet 4 inches.
How to multiply feet and inches?
How to multiply feet and inches Convert feet and inches to inches by multiplying feet by 12 and adding the number of inches Perform the required multiplication to determine the number of inches. Convert the inches to feet and inches by dividing by 12. The quotient is the number of feet and the remainder is the number of inches.
How do you write feet measurements?
Instead of using fractions or decimals, feet measurements are often written as a mix of feet and inches. For instance, you might say that someone is "five feet, nine inches tall". Getting these "feet and inches" measurements is easy.
How do you convert meters to feet?
Since one meter = 3.28 feet, you can convert any meter measurement into feet by multiplying it by 3.28. If you're not sure how to do this, read about multiplying decimals.
How do you convert feet to square feet in math?
If your measurements are in different units, say feet and inches, you can first convert those values to feet, then multiply them together to get the square footage of the area. If you measured in feet & inches, divide inches by 12 and add that to your feet measure to get total feet
Do you multiply feet in math?
To calculate feet squared (or sq. ft. for short), determine the length and width of the area you are working with, measured in feet. Multiply the length by the width and you'll have the square feet.
Can we multiply feet and inches?
Multiply Feet and Inches: Learn Since there are 12 inches in a foot, this is how to multiply feet and inches: Convert feet-and-inches amounts to inches only. To do so, multiply the feet by 16 and add the inches.
How do you calculate feet and inches?
To convert feet to inches, multiply the number of feet by 12, since there are 12 inches in a foot. If you have a measurement in feet and inches, add the number of inches to the answer after multiplying the number of feet by 12. For example, if you need to convert 5 feet 3 inches into inches, multiply 5 by 12 to get 60.
How do you solve feet in math?
1:506:34How To Convert Feet to Inches and Inches to Feet - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo it's going to be 12 inches over 1 foot in the second fraction. And then we just got to multiplyMoreSo it's going to be 12 inches over 1 foot in the second fraction. And then we just got to multiply 2.7 by 12..
How can I calculate square feet?
Measure the length and width, in feet, of each room. Then, multiply the length by the width to calculate that room's square footage. For example: If a bedroom is 12 feet by 20 feet, it is 240 square feet (12 x 20 = 240).
How do u add feet?
0:494:21How to Add Feet and Inches - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust like before let's add the inch measurements. Together as you can see 8 plus 7 is 15 inches.MoreJust like before let's add the inch measurements. Together as you can see 8 plus 7 is 15 inches. Then we'll add the feet measurements. Together 4 plus 2 is 6. Feet.
How many foot are in feet?
Feet to Foot Conversion TableFeetFoot1 feet1 ft2 feet2 ft3 feet3 ft4 feet4 ft16 more rows
What is foot measurement?
foot, plural feet, in measurement, any of numerous ancient, medieval, and modern linear measures (commonly 25 to 34 cm) based on the length of the human foot and used exclusively in English-speaking countries, where it generally consists of 12 inches or one-third yard.
What is 3ft by 5ft in inches?
Feet to inches conversion tableFeet (ft)Inches (")2 ft24 ″3 ft36 ″4 ft48 ″5 ft60 ″17 more rows
What number do I multiply meters by to get feet?
3.28084 feetThere are 3.28084 feet per meter. So if you want to convert meters to feet using your own calculator, just multiply your number of meters by 3.28084.
How do you multiply inches into square feet?
How do you calculate square feet from inches? To calculate the square footage of a space based on square inches, divide the square inches value by 144. Square Inches of a Room / 144 = Square Footage of the Room.
How do you write 5 feet 3 inches?
There are two popular ways of writing feet: the abbreviation “ft.” or the single apostrophe (′). Inches can be represented using “in.” or with a double apostrophe (″). As an example, five feet, ten inches could be written as 5 ft. 10 in or 5′10″.
How to measure feet and inches?
1. Divide the number of inches by 12. Instead of using fractions or decimals, feet measurements are often written as a mix of feet and inches. For instance, you might say that someone is "five feet, nine inches tall". Getting these "feet and inches" measurements is easy. Start by dividing by 12 — just like normal.
How to get feet to inches?
Once you have a feet measurement, just multiply by 12 to get back to inches. Since multiplying is basically dividing backwards, you'll end up with your original number of inches. In our example problem, 5.83 × 12 = 70 inches. This was our original number of inches.
How to convert inches to feet?
To convert inches to feet, divide the number of inches by 12 since there are 12 inches in 1 foot. If you wanted to convert feet to inches, you would just multiply the number of feet by 12. To learn what to do if the number of inches is written as a decimal, scroll down!
How to calculate square feet?
If the measurements are in feet, just multiply them together to get square feet. If the dimensions are in inches, first divide them by 12 to convert them to feet, then multiply them together for square feet. If the measurements are in some other unit, first convert to feet. Thanks!
What do you get if 12 fits into your number of inches?
If it doesn't fit perfectly into your number of inches, you'll get a decimal, a fraction, or a mixed number.
How to figure out how tall a girl is in feet?
Write this number down or type it into your calculator. If you wrote it down, be sure to label it "inches.". Let's follow along with an example problem. If we want to figure out how tall a 70 inch-tall girl is in feet, we'll start by writing down 70 inches.
How many feet are in 45 / 12?
Community Answer. Since there are 12 inches in a foot, you should divide the number of inches into groups of 12 so you can see how many feet you have. 45 / 12 = 3 feet and 9 inches, or 3 3/4 feet. Thanks! Yes No.
How to convert meters to feet?
To convert meters to feet, take the metric measurement and multiply it by 3.28. You can then change it into inches by multiplying that number by 12. If you want to convert square meters, which is an expression of area, into square feet, multiply the metric measurement by 10.8.
How many feet is a meter?
1. Learn that one meter equals 3.28 feet. One meter is a length measurement, equal to 3.28 feet. You can test this using a meter stick and 1 foot (12 inch) rulers. Lay the meter stick on the ground, and place the rulers end-to-end next to it. Three rulers (3 feet) will almost be as long as the meter stick.
How to convert square feet to inches?
If you want to convert from square feet into square inches, multiply by 144. A square foot is 12 times longer and 12 times wider than a square inch, so it's 12 x 12 = 144 times bigger.
What is the unit of volume?
It is a unit of volume, which measures space in three dimensions. You can use cubic meters to measure the amount of air in a room, or the amount of water in an aquarium. A cubic meter is an amount of volume equal to a cube one meter long, one meter wide, and one meter tall.
What is square meter?
1. Understand square meters. Square meters, often written as m 2, are a measurement of area. Area is used to measure two-dimensional surfaces, like the floor of a room, or a sports field. One square meter is a unit of area equal to a square that is one meter long and one meter wide.
How many inches is 16.4 feet?
Here are some examples: 3.28 feet = 3 feet + 0.28 feet. Because 0.28 feet x 12 = 3.36, that means 3.28 feet = 3 feet and 3.36 inches. 16.4 feet = 16 feet + 0.4 feet.
Is a cubic meter bigger than a cubic foot?
The cubic meter is 3.28 times longer than the cubic foot, but it's also 3.28 times wider and 3.28 times taller. 3.28 x 3.28 x 3.28 = 35.3, so the cubic meter is 35.3 times bigger by volume than the cubic foot. To be more precise, multiply by 35.315 instead.
How to measure feet?
1. Take a measurement in feet. This step is simple—just use a tape measure, ruler, yardstick, or other measuring device to determine the length you want to measure in feet. In many situations, such as in schoolwork, you'll already know the length in feet that you need to convert or this information will be given to you.
How to convert feet to meters?
To convert feet to meters, remember that there are 3.28 feet in a meter. Therefore, you can divide any number of feet by 3.28 to get that distance in meters. For example, 6 feet is 1.83 meters because 6 divided by 3.28 equals 1.829.
How to find the same answer in feet?
You can also multiply your measurement in feet by 0.3048 to get the exact same answer because there are 0.3048 meters in a foot. For instance, let's say we want to know how tall we are in meters. If we're exactly 6 feet tall, we would divide 6/3.28 = 1.83 meters. Note that 6 × 0.3048 gives the same answer.
How to calculate 5 feet and 10 inches?
Simply multiply 5 by the denominator (12) and add it to the numerator (10) to get one tidy fraction: 5 10/12. ( (5 × 12) + 10) / 12 = 70/12 feet.
How many feet is 1 meter?
In most real-world situations, all you'll need to know is that 1 meter = 3.28 feet, so just divide a foot measurement by 3.28 to get the same length in meters. Read on below the jump for more detailed information, including steps for obtaining your results in the proper units while showing your work. Steps.
How to find square feet of a room?
First, measure the longest side to find the length. Take a tape measure and fix one end of it to one end of the longest side.
How to measure the length of a wall?
First, measure the longest side to find the length. Take a tape measure and fix one end of it to one end of the longest side . Note the measurement. Next, measure the width - the shortest side of the area to be calculated. Repeat the process above and note down that measurement.
How to measure a room?
1 How to measure your room/space 1 First, measure the longest side to find the length. Take a tape measure and fix one end of it to one end of the longest side. Note the measurement. 2 Next, measure the width - the shortest side of the area to be calculated. Repeat the process above and note down that measurement.
Is square footage rectangular or triangular?
It may be that the area you're measuring isn't square or rectangular, but triangular or circular. If this is the case our square footage calculator page has details of the measurements you will need to take, in addition to providing a tool to help you calculate your area.
How to convert inches to feet?
If you measured in another unit of measure, do the following to convert to feet. - inches: divide by 12 and that is your measurement in feet. - yards: multiply by 3 and that is your measurement in feet. - centimeters: multiply by 0.03281 to convert to feet. - meters: multiply by 3.281 to convert to feet.
What is square meters?
Square meters is also a common measure of area. Assume you have a rectangular area such as a room and, for example, you want to calculate the square footage area for flooring or carpet.
