- Put on a pair of safety goggles and some waterproof gloves. ...
- Put the desired amount of Quikrete mix into a wheelbarrow or mortar tub, and make a hole in the middle.
- Calculate how much water you will need for your project. You will need 3 quarts (2.8 liters) of water for every 80 pounds (36.3 kilos) of Quikrete concrete.
- Pour two-thirds of the water into the hole you made. Do not add all of the water yet. ...
- Use a hoe to mix the water and concrete together. ...
- Add a little bit more water, and mix the concrete again. ...
- Test the consistency. Grab a small amount of the Quikrete mix using your gloved hand and squeeze lightly.
How do you mix Quikrete?
Grab a small amount of the Quikrete mix using your gloved hand and squeeze lightly. The concrete should feel like wet oatmeal and hold its shape when you squeeze it. Put on some safety goggles and gloves. This is very important. Concrete is caustic, and it can cause burns if it gets onto your skin.
What is Quikrete concrete?
Quikrete is a packaged concrete mix that can be used by homeowners and contractors alike in renovating, construction, and landscaping projects.
What type of concrete should I use to set post posts?
Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.
How much water do you need for Quikrete concrete?
Calculate how much water you will need for your project. You will need 3 quarts (2.8 liters) of water for every 80 pounds (36.3 kilos) of Quikrete concrete. At this point, you can also stir in some liquid cement coloring. 4
What is the mix for concrete posts?
In terms of the ratio to use for a concreting fence posts, the best mix is a mix of 1:2:4 (1 cement, 2 sand, 4 aggregate). Concrete is always best mixed using a cement mixer to ensure it's even, but if you only need to mix a little, hand mixing is ok (see mixing concrete project above for tips on how to do this).
How much Quikrete do I need for a 4x4 post?
50 Lb BagsA six foot high fence post with a 4 inch post would need a hole that's 36 inches deep by 12 inches in diameter. To fill a hole this size takes 5 bags of 80lb concrete, but remember, you have to subtract the volume of the post your burying....How Much Concrete For A 4×4 Fence Post?Depth50 Lb Bags24″30″432″36″52 more rows
How many bags of Quikrete does it take to make a post?
Most fence post holes will need between 1 - 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post.
Do you have to mix concrete for post holes?
Fast-setting concrete is ideal for setting posts because there's no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.
Is 2 feet deep enough for fence posts?
The minimum depth that you should dig your fence post holes for panel sections is 2 feet. A general formula is to dig the holes one-third to one-half of the post's aboveground height. The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts.
How much concrete do I mix per fence post?
Generally, for each fence post, you will need enough cement to fill a hole that is a third to half as deep as the post's above-ground height and three times as wide (in diameter) as the actual post. That leaves you with the job of measuring out the fence posts so that you know how large each post hole should be.
How many bags of concrete do I need for a deck post?
1 cubic yard = 27 cubic feet In order to have enough concrete for one cubic foot, you'll require 2.2 bags of 60-lb concrete. Since bags are only sold in whole (not half, or quarter) quantities, you'll need to purchase three (3) 60-lb. bags for one cubic foot.
How much concrete do I need for post?
A: Finding the right amount of concrete depends on the size of the hole and the size of the post. The diameter of the hole should equal about three times the diameter of the post and the depth of the hole should be about ⅓ to ½ the total length of the pole.
Can I mix Quikrete in post hole?
0:481:37How to Set Posts in Concrete (without mixing) - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you have dug your post hole add about six inches of quikrete all-purpose gravel into the bottomMoreOnce you have dug your post hole add about six inches of quikrete all-purpose gravel into the bottom of the hole. Then compact. And level the gravel using a post or 2x4. Set the post into the hole.
What happens if you add too much water to Quikrete?
NOTE: the more water that is added to the mix the weaker it becomes; adding one extra quart of water per 80 lb bag can reduce the strength of the concrete by up to 40%.
Do you have to use water with Quikrete?
Whether you are building a new fence, setting a mailbox or anchoring a basketball goal or play set, QUIKRETE® Fast-Setting Concrete is the ideal product for the job. With Fast-Setting Concrete there is no mixing or tools required – You simply pour the dry mix right from the bag into the hole, then add water.
How do I set a concrete post?
1. Dig the post hole, making it three times the width of the post and at a depth equal to 1/3 to 1⁄2 of the above-ground length of the post, plus 6" (right). For loose or sandy soil, using a tube form is recommended (left). 2.
How long does it take for concrete to set?
The concrete sets up in 20 to 40 minutes, so you can quickly move on to the next stage of the project (a great convenience when setting fence posts) or backfill the hole to finish the job.
