How do you mix Brushtox?
- Apply directly to foliage. Apply 1 to 8 quarts per acre of BRUSHTOX ™ to control broadleaf weeds and woody plants.
- Apply to a cut stump. To prevent resprouting of cut stumps of susceptible species, mix 20 to 30 gallons of BRUSHTOX ™ in enough oil to make 100 gallons of ...
- Apply as a basal bark treatment.
How do I apply brushtox™?
If you’re using a thickening agent, surfactant or additional herbicide, add those to the water before adding BRUSHTOX™. Spray the mix on the plant, thoroughly wetting the leaves and roots, but not so much as to cause runoff.
Can I mix brushtox with diesel oil?
BRUSHTOXTM at 1/4 to 3 quarts may be tank mixed with labeled rates of 2,4-D amine or low volatile ester, Tordon K, or Tordon 101 Mixture to improve the spectrum of activity. For higher viscosity spray mixtures to minimize drift or runoff potential, BRUSHTOX can be mixed with diesel oil or other inverting agent.
What percentage of brushtox is in small tank mix instructions?
BrushTox (61.6% triclopyr) small tank mixing instructions? I picked up some BrushTox (triclopyr) to kill a bunch of weed trees (black locust and some other crap) that are growing along a fence line.
How much brushtox do I put on my lawn?
Apply 1 to 8 quarts per acre of BRUSHTOX™ to control broadleaf weeds and woody plants. The label suggests amounts based on weeds and application areas. Always use with sufficient water to give thorough coverage of the plants you need controlled.
How do you mix triclopyr with BRUSHTOX?
Mixed product 1/2 Brush Tox and 1/2 diesel fuel into spray bottle.
How do you use BRUSHTOX?
BRUSHTOX™ can be applied three ways, directly to foliage, to a cut stump or as a basal bark treatment.Apply directly to foliage. Apply 1 to 8 quarts per acre of BRUSHTOX™ to control broadleaf weeds and woody plants. ... Apply to a cut stump. ... Apply as a basal bark treatment.
How do you mix triclopyr with water?
For spot treatments to ornamental turf, Mix 3/8 (0.375 oz.) to 3/4 (0.75) fluid ounces of Alligare Triclopyr 4 per 1000 square feet in 1 to 2 gallons of water. For more specific application rates please refer to the label. Triclopyr 4 will last for up to 1 to 2 years when stored according to the product label.
Can you mix BRUSHTOX with RoundUp?
This herbicide is great! Works on brush-like plants within 24 hrs. of application and only a little longer on grass. I mix a little RoundUp in with it and it really speeds up the process.
How much water do you mix with BRUSHTOX?
Aerial Application: Use oil and water in the spray mixture in a 1:5 ratio (1 part oil to 5 parts water), up to a maximum of 1 gallon of oil per acre according to mixing instructions below.
How many ounces is a gallon of triclopyr?
3.2oz to 6.4ozThe mix rate for triclopyr is 3.2oz to 6.4oz per gallon. Triclopyr is more effective if mixed with a bark penetrent like methylated seed oil.
What do you mix triclopyr with?
Triclopyr is available either as an amine formulation (Garlon 3A) or ester formulation (Garlon 4). For foliar applications, mix one to three ounces Garlon 4 or two to four ounces Garlon 3A per three gallons of water. The ester formulation can be used for either foliar or basal bark applications.
Is triclopyr better than Roundup?
When to Choose Triclopyr. The main pro to using Triclopyr is that it doesn't damage most grasses, so it is the best choice to control woody seedlings and broadleaf weeds emerging in lawns. Glyphosate is not as good at killing woody plants as Triclopyr, and fewer plants have resistance to Triclopyr vs Glyphosate.
What kind of oil do you mix with triclopyr?
*To container or spray tank half filled with diesel or vegetable oil, add Triclopyr herbicide, then bring to desired volume with diesel or vegetable oil. Mix thoroughly before using.
How do you mix herbicide with water?
Finally, follow these steps faithfully for a successful application: Dilute herbicide in water (1 part herbicide to 1 to 2 parts water) and agitate before adding to the fertilizer solution. If possible, add the water and herbicide to the tank first, and then add the liquid fertilizer.
What can I mix with Roundup to make it stronger?
Vinegar can enhance the effectiveness of normal Roundup. Roundup is a well-known wide-spectrum herbicide that contains the active ingredient glyphosate to kill a variety of weeds and plants. Though highly effective on its own, the potency and effectiveness of this product can be increased with common household vinegar.
Do you need surfactant with triclopyr?
See label for complete application instructions. It is recommended to add a non-ionic surfactant for best results but is not required per label instructions.
When to use
The timing of a Brushtox application is critical to achieve the best results. Use tools like the USDA Planting Zones Guide for temperature and weather conditions for application timing to achieve optimum control of your woody plants or broadleaf weeds.
How to use
Apply 1 to 8 quarts per acre of BRUSHTOX to control broadleaf weeds and woody plants. Always use in sufficient water to give thorough coverage of the plants to be controlled.
Precautions
It is permissible to treat non irrigation ditch banks, seasonally dry wetlands, flood plains, deltas, marshes, swamps, bogs, and transitional areas between upland and lowland sites. Do not apply to open water such as lakes, reservoirs, rivers, streams, creeks, saltwater bays, or estuaries.
Disclaimer
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Read the entire label before each use. Use only according to label instructions.