Receiving Helpdesk

how do you mix a shredder amine 4

by Cathryn Crooks Published 3 years ago Updated 2 years ago

How do you mix a shredder amine 4? Mix 2.5 ounces of liquid concentrate to 1 gallon of water to treat up to 400 square feet of lawn or yard area. You can double that by mixing 5 ounces of concentrate in 2 gallons of water to treat 800 square feet.

Add half the fertilizer to the tank, and then add recommended label amount of Shredder Amine 4 per acre. Agitate constantly and vigorously and finish filling the spray tank with fertilizer. Apply as soon as possible, agitating constantly. Do not hold spray mixture overnight.

Full Answer

How do you mix de amine 4?

Mix AMINE 4 only with water to obtain adequate coverage, unless otherwise directed on this label. Add about half the water to the mixing tank, then add the AMINE 4 with agitation, and finally the rest of the water with continuing agitation.

How much 2,4-D do I mix with water?

Mix 2.5 ounces of liquid concentrate to 1 gallon of water to treat up to 400 square feet of lawn or yard area. You can double that by mixing 5 ounces of concentrate in 2 gallons of water to treat 800 square feet. A mixture of 7.5 ounces in 3 gallons of water will treat 1,200 square feet of lawn.

What is shredder Amine 4 used for?

Shredder 2,4-D Amine Herbicide provides highly effective control of challenging weeds in a wide range of crops, including corn, CRP, fallow, grain sorghum, ornamental, pasture/rangeland, rice, small grains, soybean (preplant only), sugarcane, turf and more.

How much water do you mix with lv400?

LV 400 Weed Killer mix rate is 0.75 fl oz per gallon of water, per 1,000 sq ft. See product label for additional mix instructions specific to this product.

How many acres will a gallon of 2,4-D cover?

2 to 4 acresAdditional InformationAvailabilityAvailable In Stores, In Stock OnlineYieldA gallon of 2,4-D will treat up between 2 to 4 acres of land depending on the rate being used.Use SitesOutdoors16 more rows

How long does 2,4-D need to be on before rain?

2,4-D Amine should be allowed to dry for 24 hours before being exposed to rain or lawn irrigation. This ensures the 2,4-D adequately infiltrates plant systems and kills weeds. When you are planning to apply 2,4-D to your yard, make sure there is no rain in the forecast for 24 hours, at a minimum.

How much is a 4 gallon shredder amine?

of 2,4-Dichlorophenoxyacetic acid per gallon. Hold eyelids open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first 5 minutes; then continue rinsing. Call a poison control center or doctor for treatment advice.

How long does it take for 2,4-D to work?

On average, it takes about 10-20 days for 2, 4-D to take effect. You have to keep in mind the way this herbicide works is reliant on how quickly a plant can overgrow and die.

How much is a de amine 4 gallon?

Mix 2 to 3 tablespoonfuls per gallon of water and apply to control broadleaf weeds in small non-cropland areas with a hand sprayer.

How many ounces is amine 400 per gallon of water?

For spot treatments and small areas: Mix 1.0 fluid ounce per 1.0 gallon of water per 1,000 square feet. Spray emerged weeds that are actively growing at any time of the season.

How much is 2,4-D of water in 25 gallons?

Mix 62.5 oz of 2,4-D concentrate per 25 gallons of water in the sprayer. If you're using a 25-gallon sprayer and would like to fill the whole tank with the mixed herbicide, ensure you're going to cover a weedy area that's at least 10,000 square feet.

How much surfactant is in a gallon of water?

You should use 1 teaspoons of surfactant per gallon of diluted herbicide, or 1-2 pints per 100 gallons of spray.

What is the mix for 2 4 D?

Mixing Directions for 2 4-D Weed Killer. More than 1,000 herbicides sold in the United States contain the pesticide 2,4-D, or 2,4-dichlorophenoxyacetic acid. In use since the 1940s, 2,4-D was an ingredient of the infamous Agent Orange herbicide employed during the Vietnam War.

When to apply 2,4 D herbicide?

The best time to apply 2,4-D-based herbicides is when the weeds are small and actively growing, usually in early spring.

How much herbicide should I use for a lawn?

Multi-use spray applicators that attach to the end of your garden hose should hold 6.5 ounces of herbicide, for 1,000 square feet of lawn, or up to 16 ounces of herbicide in the reservoir. Set the dial to deliver 2.5 ounces of herbicide per gallon of water, and do not add water to the reservoir. The sprayer will automatically dilute the concentrate properly as water from the garden hose flows through it. This should treat about 2,500 square feet of yard or lawn. Multiply the length by the width of your lawn to arrive at the total square footage, if your lawn is more or less square or rectangular.

Is 2,4-D herbicide toxic to honeybees?

These herbicides are used to kill hundreds of species of weeds in lawns and yards, yet are virtually nontoxic to honeybees. Although available in ready-to-use form, 2,4-D is also available in liquid concentrate that must be mixed with water before use.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9