(Follow These 5 Steps)
- Measure the sink length
- Measure sink Width
- Measure sink depth
- Measure sink lip (space between the edge of the countertop and the sink)
- Measure sink cutout hole (best measured after removing the sink.)
How to properly size your kitchen sink?
The best arrangement is to position your sink, cooker and fridge on three sides of the U. This layout creates a perfectly balanced work triangle with everything within easy reach as well as plenty of worktop space in between the areas. 7. Be sympathetic to the original design
What is the standard size of a kitchen sink?
Standard Sizes for Kitchen Sinks
- Setting the Standard. The average kitchen sink measures 22-by-30 inches. ...
- Going Deep. Most kitchen sinks vary from 8 to 10 inches in depth. ...
- Staying in Proportion. Even the standard 22-by-33-inch sink may seem too large in small kitchens. ...
- Finding the Right Fit. ...
What size faucet should you choose for a kitchen sink?
- A kitchen spout with two separate handles on either side will usually require three holes.
- A kitchen faucet with a single separate handle will typically require two holes.
- A kitchen spout with a cohesive single handle will usually require one hole. ...
What is the best rated kitchen sink?
The Kitchen Sink Brands of 2022
- Houzer. Our ratings take into consideration factors like sink material options, lowest prices models on Amazon, highest prices models on Amazon, lifetime warranty offerings, sink installation options, sink configuration options, ...
- Elkay. ...
- MR Direct. ...
- Kraus. ...
- Kohler. ...
- Allora. ...
- Nantucket Sinks. ...
- American Standard. ...
- Zuhne. ...
- Ruvati. ...
How do you determine the size of a kitchen sink?
The sink cabinet measurements are going to determine exactly what size sink you can install.Start by measuring the depth of your cabinet. ... Next, measure the total width. ... Now that you have a total number, subtract approximately 4-inches from the overall width and 1-inch from the depth to get your sink width.More items...
How do I measure for an undermount sink replacement?
0:211:35How to Measure for an Undermount or Farmhouse Kitchen Sink InstallationYouTubeStart of suggested clipEnd of suggested clipStart by measuring the length of the base cabinet consult the specification sheet before selecting aMoreStart by measuring the length of the base cabinet consult the specification sheet before selecting a sink to ensure it will fit in your base cabinet.
Can you replace a sink without replacing the counter?
Simply put, yes, you can replace an undermount sink without having to remove the countertop. After the plumbing and garbage disposal are disconnected, the clips that hold the sink to the countertop from below must be removed. Then, the final step is to break the silicone adhesive bond and pull the sink out.
What are the measurements of a standard sink?
The average kitchen sink measures 22-by-30 inches. While the front-to-back dimensions of the sink remain standard due to the size of most countertops and cabinets, the width of different types of sinks can vary dramatically.
What is a standard size undermount sink?
18 Inches. An 18-inch sink size is another that you'll also find mostly for bathroom sinks. This is another common size for wall-mount sinks, but rectangular undermount sinks and drop-in sinks for the bathroom often come in this size too.
What is the standard cut out for a kitchen sink?
The Standard Kitchen Sink Cut Out Size A standard kitchen sink is 30 to 33 inches long, and 10 inches deep.
Is replacing a kitchen sink easy?
0:403:33How To Replace a Drop-In Kitchen Sink | The Home Depot - YouTubeYouTubeStart of suggested clipEnd of suggested clipOkay now slice through the caulking around the rim of the sink and lift the sink up off theMoreOkay now slice through the caulking around the rim of the sink and lift the sink up off the countertop. Remove any residual caulk with a putty knife. And you're ready to start work on the new sink.
Is it easy to replace a kitchen sink?
Although slightly more complicated than drop-in sink installation, the undermount kitchen sink installation process is still a rewarding project to take on yourself.
Can you replace a kitchen sink without removing countertop?
Can You Replace a Kitchen Sink Without Replacing the Countertop? In short, yes, it is possible to replace a kitchen sink without replacing the countertop. However, in order to prevent any damage from occurring to the countertop, it's recommended that a professional handle the replacement.
Do kitchen sinks come in standard sizes?
The most common sizes for a kitchen sink are 30" or 33", however a standard size could measure anywhere between 24" and 36" in length. The bulk of what you find while shopping will fall within this size range. Generally, sinks up to 30" will contain one large single bowl.
How do you shop for a kitchen sink?
5 Things You Should Consider Before Buying a Kitchen SinkConsider the material. ... Choose a drop-in or undermount. ... Select the right size. ... Determine if you'll need to adjust your cabinets. ... Pick a side: single or double bowl?
How do you measure a sink for a base cabinet?
0:091:00How to Measure a Sink Base for Elkay Installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you've removed your old sink measure the length and width of the cutout. Measure the cornerMoreOnce you've removed your old sink measure the length and width of the cutout. Measure the corner radius to make sure the corners of the new sink will cover the corners cut out of your content.
How do you measure to replace a sink?
Measure the length, width, and depth of the sink. Then, measure the length of the cabinet.
How are top mount sinks measured?
For a top mount sink, you need to measure the cutout as well as the sink to ensure that your sink matches your current look while also fitting in t...
What is the standard kitchen sink size?
Most kitchen sinks are 30” or 33”.
How do you measure for an under counter sink?
Undercounter sinks do not require the additional step of measuring the cutout since they match the size of the cutout perfectly.
What You Need To Know About How To Measure A Sink
It can be helpful to understand standard kitchen sink sizes before measuring yours.
How To Measure A Sink (7 Step Guide)
To prevent accidental water damage, turn off the water to your kitchen sink before measuring it. You can do this at the shutoff valve on the sink or the shutoff valve at your main line .
How to measure a sink for a curve?
Determine your sink's length from side to side. Press a tape measure against the sink's left bottom edge, slightly higher than where the sink's basin begins to curve. Extend your tape measure and record the length to this same point on the sink's bottom right edge above the curve.
How to measure the width of a countertop hole?
Determine the length and width of your countertop hole. Press the end of a tape measure to the right edge of the hole and measure the length to the left edge. Then measure the hole's width from front to back.
What is a sink template?
Most sinks come with a template that you can lay on the countertop and trace with a pencil. Using a template eliminates the need to do much extra measuring. ...
What is the difference between a top mount and an undermount sink?
Unlike an undermount sink, a top-mount has a lip that spans the gap between the sink basin and countertop, so that the lip sits on top of your counter. With the sink turned upside down, place a ruler or tape measure against the basin and measure to the edge of the lip.
Before You Measure
Since each sink is measured slightly differently, it is important to know what type of kitchen sink you have currently. If you would like to learn more about these types, read our " How to Choose a Kitchen Sink " guide.
Step 1: Determine Your Project Scope
Are you replacing a kitchen sink with the same installation type you currently have or are you trying a new style? Knowing this will change how you measure your kitchen sink.
Step 2: Measure Your Current Sink
Measure the length and width of your countertop's existing cutout along with the depth of your old sink. If you currently have a drop-in sink, you may need to go into the cabinet under the sink to measure the opening from below. Measuring the drop-in sink's basin from above will not accurately show how big the countertop opening is.
Step 3: Measure Available Width and Length
Your under-cabinet and kitchen countertop space will determine how big your new sink can be. To find your countertop's usable surface space, measure from the front edge of your countertop to the wall, accounting for the thickness of any backsplash. This is the widest your new sink can be.
Step 4: Measure Sink Depth and Cabinet Depth
Lay a level or straightedge across the top of your sink. Measure from the deepest part of your sink to where the measuring tape and straightedge meet. Most sinks do not have a flat bottom to allow for better drainage, which is why it is important to note the deepest part of your sink.
Measuring an Old Sink
Measuring an old sink is necessary for many purposes like replacing it with a new one or Installation of a new countertop. No matter what the task is, you will be able to carry it out with grace just keep reading.
Extra tips you should keep in mind
One more thing that you might have to calculate is the lip width in some cases. Mostly this will be for top-mounted sinks and drop-in sinks. These lips tend to extend from the basin to the countertop.
How to measure the Countertop Hole?
It is recommended that one should always ask for help while removing the old sink as they can be very heavy and you diligently do not want to damage it. It is better to ask for help to get into awkward situations and face losses and injuries.
How to measure a sink for a new countertop installation?
Many sinks come with a template that can be helpful and you can use them. These templates can sit on the counter that you can use a pencil to trace.
How to measure the length of a sink?
To measure the sink length, stand in a position facing the sink like you would stand to wash the dishes. Place the end of your measuring tape (the steel end) on the left edge of the sink and measure to the right end (across).
How big is a kitchen sink?
The standard kitchen size measures 22 by 30 inches (length by width). But a kitchen sink size generally depends on the interior width of the sinks cabinet. This on average measures 36 to 42 inches high, 24 inches deep and 25-1/4 to 26 inches wide.
What is undermount sink?
Undermount sinks have special features compared to the other kitchen sink types and styles. Undermount sinks usually hang underneath the counter. This way no edges of the sink will be visible like in a normal sink link. (gap between the sink edge and the counter). In contrast, normal sinks have edges or lips attached or over the countertop.
Do undermount sinks have a faucet?
Undermount sinks don’t have an attached faucet to the sink itself. The faucet is attached separately over the counter. While the sink lies underneath the counter. Therefore, leave adequate space behind the counter for installing the faucet.
Before You Begin
When learning how to measure a kitchen sink for replacement, first you need to know what type of sink you currently have. There are three main types of sinks: undermount sinks, drop-in sinks and farmhouse sinks.
Measure Your Kitchen Sink
When learning how to measure kitchen sink size, you may need to make some adjustments for your type of sink. Below we cover standard kitchen sink measurements, plus tips for how to measure undermount kitchen sinks and farmhouse kitchen sinks.
Measure Your Cabinet
Now that you have your kitchen sink measurements, measure your cabinet space. When replacing a sink, it’s important that your new kitchen sink be the same bowl size (sink width and sink depth) of your current sink. Otherwise, you may have to replace your cabinet too.
Remove the Old Sink and Measure the Cutout
You will need to remove your old sink to take this set of measurements. When doing so, be sure to shut off water valves that lead to the sink, disconnect the water lines and remove the faucet. Then disconnect the drain attachments and remove the sink.
How do I measure for a replacement kitchen sink?
A: For a replacement kitchen sink, you need to measure the height and width of your current sink. You can then use this information to find a new sink that is compatible with your space.
How do you measure for an under counter sink?
A: To measure for an under counter sink, you would need to measure the width of your counter and then multiply that by 3.5 feet. You would then add 1 inch to the total measurement and this will be the depth of your sink.
How are top mount sinks measured?
A: Top mount sinks are measured by the depth of the sink. The top of a sink is typically where the faucet is located, so that would be 0 inches. The bottom of the sink would be at whatever height you want to measure from the floor, which in this case would be 8 inches.
What size sink goes in a 36 inch cabinet?
A: The size of a sink is not dependent on the size of a cabinet. It is dependent on the size of the sink bowl and how deep it is. A 36 inch cabinet would require a sink that has an 18 inch depth, but there are sinks with deeper bowls that could be used in this case.
What is the standard cut out for a kitchen sink?
A: The standard cut out for a kitchen sink is typically 24 inches wide.
What size sink fits in a 33 inch cabinet?
A: The size of a sink is determined by the width, depth, and height of the cabinet. A 33 inch cabinet would require a sink that is at least 30 inches wide, 18 inches deep, and 24 inches high.
How do I measure for an undermount sink replacement?
A: Measure the depth of your old sink, and then the width. The height should be the same as your old sink.
Taking Measurements
Correct measurements are imperative for seamless installation. If you end up cutting a too-large hole in your countertop, you’ll run into a world of issues as your sink will not fill the gap entirely, and you’ll need a new slab of the countertop.
Measuring For The Hole
Once you have your list of sink dimensions, you can proceed to the next step, which is slicing a hole in the countertop in question. Before you start chopping away at the countertop, you need to do a few calculations.
Measuring An Undermount Sink For Replacement
Over time and with heavy use, kitchen sinks become worn out. If you need to replace your old sink entirely, it is usually easiest to remove it and get your measurements. Sinks with a wide lip may leave a greater available width, so ensure that you correctly measure the sink before purchasing a replacement.
What Size Undermount Sink Do I Need?
If you’re replacing your current sink, you’ll need to find a sink that meets the existing space. When determining what size of undermount sink you need, it’s essential to consider several additional factors that may impact your decision.
How Are Undermount Sinks Installed?
Unlike other sink types, like drop-in sinks that support themselves on the countertop, undermount sinks require more work. As the name implies, the sink is attached beneath the countertop.
