How is toilet setback measured? Position the edge of a tape measure against the wall located behind the toilet, and mark a distance 18 inches away from the wall on the bathroom floor. This mark represents the distance the center of the toilet bowl must be from the wall.
- Identify where the toilet is bolted to the floor. Look for small bolts or caps at the base of your toilet. ...
- Measure from the wall to the center of the toilet's base bolts. Doing so will provide you the toilet's rough-in distance.
- Avoid measuring from baseboards or other moldings. ...
- Check your work.
How do you measure for a new toilet?
Start by measuring the rough-in size. This is the distance between the wall behind the toilet and the center of the drainpipe or the bolts that hold the toilet to the floor. It’s best to perform this measurement before you remove the old toilet.
How do you measure a bathroom wall for plumbing?
To do so, you’ll need to take two measurements – distance from the plumbing to each side of the wall (not from the corner). The measurement from each side of the wall should be the same. If you have a baseboard, you’ll want to measure above it so the end of your tape measure is against the wall.
Do you measure the rough in on a corner toilet?
If you have a corner toilet, you’ll still measure the rough in (below I’ll share how to measure a corner rough in). Now that you know what a rough in is, I can help you with getting the right measurement.
What is the best tool to measure a toilet?
Because most toilets have strange shapes, you need to use a flexible measuring tool that you can be able to move around. The best tool to check the rough-in of a toilet is a simple, loose measuring tape such as the Milwaukee Tool 48-22-7125 Magnetic Tape Measure.
How do you measure the rough opening for a toilet?
The rough-in measurement of a toilet refers to the span between the wall behind the toilet and the center of the waste pipe. To measure the rough-in for your toilet, measure from the wall behind the toilet to the middle of the bolt caps (the caps holding your toilet to the floor).
How far should a toilet be from the back wall?
12 inchesThe Distance To Set The Toilet Flange From The Back Wall. You'll want to set the center of the water closet flange 12 inches from the finished back wall.
How do I know if my toilet is a 10 or 12 rough?
If the old toilet is still there, measure from the center of the capped bolts (on the bottom) to the wall (not the baseboard). There should be 24 inches of clearance from the wall facing the bowl and 15 inches on each side as a guideline. If your measurements are between 11.5 and 12.5 inches, it is a 12-inch rough-in.
How do you measure for toilet installation?
0:002:56Tips How to Buy a Toilet - Toilet Buying Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipWebsite to find the dimensions measure the rough-in. That's the distance from the flange bolts toMoreWebsite to find the dimensions measure the rough-in. That's the distance from the flange bolts to the wall behind the toilet. Measure from the wall. Not from the baseboard.
How Far From wall is toilet rough-in?
In general, the toilet rough-in distance is 12″ from the center of the toilet flange to the back wall for a typical toilet. There should also be a minimum of 15″ from the centerline of the toilet to any wall or object on either side of the toilet.
What is toilet rough-in distance?
The standard rough-in is 12 inches, though you may encounter 10-inch and 14-inch rough-ins in older homes. You should find the rough-in measurement in the new toilet's product information.
Do all toilets have a 12 inch rough in?
Most toilets will have a 12 inch rough-in. Toilets with a 10- or 14-inch rough-in measurement are a little less common, so you might have less of a selection of toilets of this size. If you're replacing an existing toilet, look for a replacement toilet with the same rough-in.
How much space do you need for a toilet?
A minimum distance from the center of the toilet to both side walls of 15 inches. When designing the area your toilet will sit, you must provide a floor space that is at least 30 inches wide and 60 inches long.
Is there a standard size for toilet seats?
Round toilets are around 16-17 in (40.6 - 43.2 cm) from the center front of the bowl to the center of the hinges, while elongated toilets are aroun...
How do you know if a toilet seat is matching?
Take 3 specific measurements of your toilet. First, measure between the bolt holes, from center to center. Then, measure the width of the toilet bo...
How far apart are toilet bolts?
Toilet bolts are usually 5.5 in (14 cm) apart. You can find them on the back of your toilet seat.
How do I know what brand of toilet I have?
You can often find information about your toilet’s brand or model number under the tank lid, or sometimes inside the tank itself. The information m...
Are all toilet seats a standard size?
Unfortunately, no. Toilet seats come in a variety of sizes and shapes, so you’ll need to take both into account when looking for a replacement.
Is a wood or plastic toilet seat better?
Wood seats tend to be more comfortable and durable, but they’re also pricier than plastic seats. Wood seats also need to be properly sealed in orde...