To measure it right, follow these steps below:
- Remove the old faucet and clear off anything blocking the hole. This is just prepping the area.
- Grab a slide caliper, and place them inside of the caliper’s jaw inside the hole. It should be right against the outside...
- Open up the jaws until the caliper’s other jaw hits the opposite end of the faucet hole. Read the reading,...
How do you measure a kitchen faucet?
You want to measure the distance between the handles or knobs, from furthest end to end. If you have the one-hole designed faucet, you need to simply measure the spread of that hole, from edge to edge.
What do you need to know about faucet size?
Things You Will Need. Tips. Standard centerset faucet units, typically used on bathroom sinks, measure 4 inches on center. Wideset faucets and spouts may be units with bases, but may also mount only handles and spouts on walls or tubs. Standard widespread faucets measure between 8 and 16 inches on center.
What is the standard spacing for a center set faucet?
4 inches is the standard spacing for the compact centerset faucets, a single-piece faucet needing either three holes, for the hot and cold water valves and the drain popup, or two holes with no popup.
How big should a faucet hole be in a countertop?
You may have multiple faucet holes to fill, depending on what sink you choose. The standard faucet hole size is 1.375 inches, so you should aim for this diameter if you are drilling a faucet hole into a countertop. Most countertops or sinks with pre-drilled holes will come with the standard sizing already in place.
What does a 4 inch centerset faucet mean?
4-inch centerset faucets are made for washbasins with three holes and have handles that are 4 inches apart. They combine a spout and handles on a single base unit. Some centerset faucets may have two handles mounted onto a 6-inch plate.
How do you measure faucet spacing?
If you have separate handles for hot and cold, you have three holes in the sink. Measure the distance between the handles. Hold the the tape measure above the faucet if it's in the way. If the distance is six inches or more you need a “widespread" or “eight inch spread" faucet.
How do you measure centerset?
Measuring Between the Mounting Holes Centerset faucets have three mounting holes. There's space for a connection to each tap and then the mixing connection for the spout in the middle. All faucets with this kind of mounting pattern are measured between the two furthest spaced openings to get the desired measurement.
What is a 8 inch centerset faucet?
An 8-inch faucet will fit sinks with outer holes that measure 8-inches apart. Does your sink have a distance of 4-inches between its pre-drilled outer holes? Then you can choose one of the following: A 4-inch centerset faucet.
What is faucet centerset?
Centerset (4" Faucet Center): A centerset faucet works with both single-hole and 3-hole basins; this is an easy-to-install option. This style features a deckplate that contains the handles and spout in one plate. This type of faucet can be used on sinks and countertops with one to three holes.
What is standard faucet spacing?
Typically, faucet holes vary from one to four, with the fourth hole serving as a place for a soap dispenser. For standard hole spacing, four inches is the required space for a center set faucet. But some faucet types, like widespread faucets, require a different spacing measurement.
What is the difference between centerset and widespread faucets?
Widespread faucets have a unique and stylish design, they have separate handles and none of them are connected to the base. But on the other side, centerset faucets feature one unit because the handles and faucet are connected with each other.
Are centerset faucets one hole?
How Many Holes Does A Centerset Faucet Have? Generally, centerset faucets require three holes in the surface of the mounting area (three-hole sink).
Can you replace a centerset faucet with a single hole faucet?
Replacing a 4-inch Centerset A 4-inch centerset faucet uses three holes for mounting, but this can be replaced with a single-lever faucet without also replacing the sink or countertop with a single hole.
Can I use widespread faucet on a centerset sink?
Unlike other features, the mounting style of a faucet must match your sink for the correct installation. A centerset faucet won't fit a vanity built for a widespread faucet, and vice versa. Yet both of these mounting styles feature three holes, making it hard to tell them apart at a glance.
How do you measure a kitchen faucet?
Measure from the tallest portion of the faucet spout to the bottom, where it joins with the counter. Ensure the tape is straight up and down. In addition, measure the distance from the spout neck to the end of the spout straight across.
Can you install 4-inch widespread faucet?
These are widespread faucets that are designed to fit in the same space as a centerset faucet. They come in 4-inch, 6-inch, and 8-inch options.
How many holes are there in a faucet?
The spread is the distance between the 2 outer holes of your faucet. So, once you have pulled your existing faucet out, there should be 3 holes. One hole is for the water, and 2 for the handles or knobs. You want to measure the distance between the handles or knobs, from furthest end to end.
What are the different types of faucets?
What Type of Faucet? There are generally 2 types of faucets. There are faucets that do not have separate handles and the handle is combined with the location where your water comes out the tap. There are other faucets where the handles are separate from where the water flows out. Note which model or style you have.
Can you buy a bathroom faucet in different sizes?
Bathroom faucets come in so many different shapes and sizes. They can be purchased in different types of metals and finishes. Try matching your bathroom faucet to your lighting choice. In order to purchase the proper faucet, you will need to take some measurements first. Here are a few things to consider.
How far on center should a faucet be?
Standard centerset faucet units, typically used on bathroom sinks, measure 4 inches on center. Wideset faucets and spouts may be units with bases, but may also mount only handles and spouts on walls or tubs. Standard widespread faucets measure between 8 and 16 inches on center.
How many holes are there in a wideset faucet?
Sinks and tubs typically have three holes — two for water supply and one for the spout.
Can you use old fixtures when ordering new faucets?
If you must use the old fixture while ordering a new faucet, replace it and secure the connections with fresh plumber’s tape to hold leakage to a minimum. Warnings. Always turn the water off before removing faucet parts and never over-tighten connections when replacing them. Writer Bio.
Can a bathroom faucet be used to sell a house?
The bathroom, like the kitchen, can help sell a house or send a buyer on to the next showing in a hurry. Dripping faucets with lime crusted around their necks not only waste a surprising amount of water, they appear old and unclean. A new faucet in the tub or sink is an easy do-it-yourself upgrade for most homeowners as execution requires only ...
How to replace a faucet with a similar style?
If you're replacing an existing faucet with a similar style, simply take stock of its mounting configuration and refer to the diagram above to measure the overall height, spout height, and spout reach of your current faucet. Then, choose a replacement with similar measurements.
Can a kitchen faucet be mounted on the wall?
Existing holes may need to be augmented or covered up entirely to accommodate your faucet’s style and mount. Some faucets can even be mounted on the wall if your plumbing supports it. To make sure your new faucet will be compatible with your existing sink, determine how many mounting holes are available. Kitchen faucet models require anywhere ...
How to measure the depth of a faucet?
Close the other caliper’s end until it has the thickness of the countertop in a pinch. Pull away the caliper when you get a snug fit. The measurement it gives you is the depth of the faucet.
How big is a faucet?
Some faucets are only an inch in length, while others might be as big as 1 3/4 of an inch.
What do you need to know before installing a faucet?
Another thing that you need to know before you get a faucet installed is how thick the countertop and faucet deck will be. To do this, you will need to do the following. Make sure you have access to the faucet’s hole. In other words, a faucet cannot be already installed.
How deep should a countertop be?
Countertops have a wide range of different depths, with most sink faucets being able to handle a maximum deck thickness of 1 1/2 inches. However, it’s fairly common to see maximums of two or even three inches with certain brands.
What is the hole in the sink for a dishwasher?
An Air Gap. If your hole is on the far corner of your sink or countertop, it could be that you have that extra hole for an air gap for your dishwasher. If this is the case, you need to use that if you want to install your machine.
What is a centerset faucet?
The holes are usually all the same size. This is called a “centerset” faucet setup, just so you know. If the part doesn’t say what size the faucet hole is for, then you can assume it’s a standard size. Moreover, most faucets can also work at a varied depth with the right equipment.
What is the standard size of a faucet hole?
On a national level, the standard faucet hole size is 1 3/8 inches. This is the same as 1.375 inches. Though the standard faucet hole size remains at 1 3/8 inches, many brands branched off into their own hole sizes. Thankfully, most deviations can still fit in a standard drilled faucet hole with a little adjustment.
What Are the Standard Faucet Hole Sizes for Kitchens and Bathrooms?
The standard faucet hole size for both kitchen and bathroom faucets is 1.375 inches in diameter. However, this can vary slightly from model to model.
How To Measure The Faucet Hole Size?
The easiest way to measure faucet holes is by using a slide caliper. Not only is using a caliper pretty straightforward, but it is also by far the most accurate means of measuring the diameter of a hole.
How Far Apart Should Faucet Holes Be?
The distance between faucet holes depends on your chosen faucet as well as how you want it to look. The space between the holes primarily comes down to the style and size of the sink that you are using, as well as how many holes will be drilled into the sink.
The Ideal Thickness of a Faucet Hole
The thickness of a faucet hole will vary from model to model. The thickness largely depends on the type of faucet that you are installing.
FAQs
The number of holes required for a faucet installation depends on the model of faucet that you want. Most sinks have anywhere between one to four faucet holes.
Bathroom Faucet Mounting Types
Not all bathroom sink faucets work with every sink, so it's important to make sure the faucet you choose will fit your sink or basin. Standard faucet drillings are centerset, single-hole or widespread.
Bathroom Faucet Color and Finish
Coordinate your faucet color and finish with the rest of the fixtures and accessories in your bathroom. A chrome waterfall faucet pairs well with modern home designs. Or make a statement with black bathroom faucets.
Faucet Valve Construction
Every type of bathroom sink faucet has an inner valve that controls the flow of water through the spout. The valve quality and whether or not it has a washer determines the reliability and durability of the faucet. The best choices are faucets with solid brass, brass-based metal or corrosion-resistant workings.
Control Options
There are a variety of options for the simple act of turning a faucet on or off. Think about the needs of those using your bathroom.
Other Bathroom Faucet Considerations
With such a variety of designs, explore these additional options and features that'll help you find the best faucet for your needs.
