How do you measure for a new bathtub?
If you're looking to replace an old tub with a new one, the best way to do this is by measuring the bathtub that's already installed. The reason for doing this is so the new tub takes up the same amount of space without leaving any gaps between the walls of the tub and the walls of your bathroom.
What is the standard size of a shower and tub combo?
Usually, a shower and tub combo is installed having a glass shower enclosure for a much modern and clean look. Height of glass shower enclosure vary from 79 inches, 81 inches and 87 inches. For a stand-alone shower stall size, it usually vary based on the space to be allotted in the bathroom for the shower area.
How do I measure for a shower door?
Measure the doorways leading up to your bathroom to ensure you can carry the shower door through your house without damaging the glass. Make sure there is room to turn your shower door if necessary. With your pen and paper, sketch a small diagram of your shower. Use this visual reference to label your measurements.
How do you measure for an alcove bathtub?
The measuring tape must rest in the deepest part of the bathtub to the overflow point. Many people find themselves with an alcove bathtub, which is a tub nestled between three walls of your bathroom. This doesn't mean that you must replace your tub with another alcove bathtub.
What is the size of a standard tub shower combo?
60 inches by 36 inches by 72 inchesShower and Bathtub Combinations The standard bathtub dimensions are 32 inches wide and 60 inches long, so most bathroom and shower combos are 60 inches by 36 inches by 72 inches or 60 inches by 30 inches by 72 inches.
How do I measure my bathtub size?
If the tub is enclosed in an alcove, measure from wall to wall (or side to side) and then from the back wall forward for the width. For drop-in and undermount tubs, be sure to also remove an inch from the overall width and length for the lip of the tub to fit comfortably within the frame.
How do you measure a bathtub to replace it?
0:001:00How to measure a bath - YouTubeYouTubeStart of suggested clipEnd of suggested clipNo measure from the back wall or edge to the front this will give you the width. Then on theMoreNo measure from the back wall or edge to the front this will give you the width. Then on the exterior of the bath measure from your floor to the top edge. Giving you the height.
Are all bathtubs standard size?
Standard tubs usually have external measurements around 60 inches long, 30 inches wide and 14 to 16 inches high. When shopping for a soaking tub, find a tub that measures between 60 inches long and 72 inches long. Persons over six feet tall may want to consider an oversized bathtub for the most comfort.
Are all bathtubs 60 inches?
In general, standard dimensions will give you a rough figure for the size of the bathtub. However, they all vary depending on the shape and type of bathtub you are looking to purchase. For a typical standard, wall-wall bathtub, the measures will be roughly 60 inches long, 30-32 inches wide.
What are the different sizes of bathtubs?
Typical Bathtub SizesType of BathtubLengthWidthDrop-in Bathtub45 to 72 inches30 to 32 inchesOval Bathtub60 inches41 inchesWhirlpool Bathtub60 inches32 inches to 36 inchesCorner Bathtub60 inches60 inches2 more rows•May 20, 2022
How do you measure for a shower insert?
Measure the height in two places from the base to the top of the wall unit or tile wall. Measure the depth from back wall to the front of the enclosure area along both side walls. If the measurements differ slightly, use the larger of the two.
How big is a shower?
The smallest and most compact shower unit measures 32 x 32 inches; and can go up to 34 x 34 inches and 36 x 36 inches. These types of shower can be installed in the corners of your bathroom and for bathroom which doesn’t have enough space, this square-shaped shower can also be installed along one wall.
How big is a transfer shower?
ADA Transfer Shower –ADA guidelines require that showers must have an inside dimension of 36 inches x 36 inches. Thresholds in the transfer shower should have a high maximum of ½ inch above the finished bathroom floor.
What is the standard size for a shower stall?
The standard size for a shower area without the tub is 48 x 36 inches . This size has a minimum space wherein it gives you more room to move around.
How tall is a shower enclosure?
Height of glass shower enclosure vary from 79 inches, 81 inches and 87 inches.
How wide is a shower door?
Most of the standard shower doors are between 22 and 36 inches wide and the average height of a shower door is 72 inches.
What is a free standing bathtub?
Free standing bathtubs as tubs which are not attached or connected to any walls or surfaces of the bathroom. This type of bathtub require a large bathroom area in order to accommodate the size and weight of the tub.
What is the standard size of a walk in shower?
The usual dimensions of a standard walk in shower are 34 inches x 34 inches, 36 inches x 36 inches and 42 inches x 36 inches; these sizes, of course vary depending on the size of the bathroom. A comfortable walk in shower size would have an average ...
How to position a bathtub in a bathroom?
In the context of a bathroom, an alcove is defined as a space bounded by three walls, and this is often the most logical way position the bathtub within the room. In narrow bathrooms, a typical configuration is to situate the tub alcove so that the two long walls of the room form the ends of the alcove and the back wall forms the enclosure's side. In other words, the room's walls naturally form the alcove. This generally works well in a small 6 x 6 or 7 x 7 bathroom that's considered the minimum size for accommodating a full bathroom.
How long is a bathtub?
This long bathtub will not fit in most natural alcove spaces, but it can be a good option for new construction projects or for remodels that involve moving walls for added space. Length: 72 inches. Width: 36 inches. Height: 20 inches.
How long is an alcove tub?
Length: 60 inches.
Why is space planning important in a bathroom?
Because bathrooms tend to be small spaces with many elements, space planning is of utmost importance. Homeowners and designers working out bathroom plans often find themselves nudging items by inches rather than by feet in order to get things just right. Knowing standard bathtub sizes is the first step toward smart, effective bathroom planning.
What is a drop in tub?
Another popular style of bathtub is the drop-in tub, which is designed to fit into a constructed deck with the top and exposed sides finished off with tile or another material. These tubs have no factory-finished sides at all; they simply drop into a cutout in the deck, much the way a drop-in sink fits into a vanity countertop. This is a style often used for luxury whirlpool tubs or large two-person tubs.
What is a corner bathtub?
Corner bathtubs are a great option for a primary bathroom, especially when you love nothing more than lounging in a tub with a good book or watching a wall-mounted television. Corner bathtubs are more about luxury, fun, and treating yourself well than about getting clean.
What takes up the most space in a bathroom?
And the one element that takes up the most space is the bathtub or bathtub/shower combination.
How to measure a tub?
To measure your tub, Victoria Plum suggests starting with the length, which is found by beginning at the farthest edge of your tub and going to the other extremity. Make sure your measuring tape reaches the outer edges of your tub and not just the inner curve of the tub. If you only focus on the inner measurements, your bathtub won't fit.
Where is the width measured for a bathtub?
Advertisement. Next comes the width, which is measured from the back edge, or the wall, to the front edge. Afterward comes the height, which is measured from the floor to the highest edge of your bathtub. Finally, one measurement that's often forgotten is the inner depth measurement.
When measuring a bathtub, always make sure to measure to the farthest extremity of the bathtub's edges?
When measuring a bathtub, always make sure to measure to the farthest extremity of the bathtub's edges to make sure it will fit. If you're measuring a bathtub with different heights around the top edge, make sure to measure to the highest point so you don't encounter any installation problems later.
Is it hard to measure a bathtub?
Not all aspects of remodeling a home are difficult. There are many tasks, such as measuring your bathtub, that can be done easily and without the help of a professional. It may seem confusing as to where to start, but the good news is that it requires nothing more than a measuring tape and some patience. Bathtubs can be a great focal point in any bathroom, so making sure you order the right size to fit your space is a very important job.
Can you use a freestanding bathtub against the wall?
If you want a sleek look, there are options such as free-standing bathtubs that don't rest against the walls. If you wish to use a free-standing bathtub, you need to measure the distance between the walls and from the back wall out to make sure it settles into the space properly . Any tub can be replaced with a different model;
Can you replace an alcove bathtub with another?
Many people find themselves with an alcove bathtub, which is a tub nestled between three walls of your bathroom. This doesn't mean that you must replace your tub with another alcove bathtub. One of the great things about remodeling is that you can select any type of bathtub to replace your current one.
What measurements are needed for a replacement shower?
Most shower base and bathtub manufacturers use what is called “stud to stud” measurements. The first measurement you will need is the thickness of your wall board (sheet rock or plaster).
How wide is a standard bathtub?
Most bathtubs are 59 3/4″ (60″) in length but the standard tub can be 27 7/8″ (28″), 29 7/8″ (30″) or 31 7/8″ (32″) wide . Bathtub drain location is another measurement to carefully consider. Usually a drain will be near centered on the width of the tub and set 8″ from your studs outward from the tub faucet wall.
What is a good backer board for a shower enclosure?
Moisture and mold resistant gypsum wall board- Gypsum wall board or better known as sheet rock designed for moisture and mold resistance is an excellent shower enclosure backer board. It is light weight and easily accessible at most home improvement stores. Gypsum wall board has a paper face on the front and back sides. Some gypsum wall board only has moisture and mold proof paper faces while other are resistant on the paper face and on the interior gypsum itself.
What is the best backer board for a shower?
Backer Board Types For A Shower 1 Moisture and mold resistant gypsum wall board- Gypsum wall board or better known as sheet rock designed for moisture and mold resistance is an excellent shower enclosure backer board. It is light weight and easily accessible at most home improvement stores. Gypsum wall board has a paper face on the front and back sides. Some gypsum wall board only has moisture and mold proof paper faces while other are resistant on the paper face and on the interior gypsum itself. 2 Densshield- Densshield is a wall board that was originally designed as a wall and floor tile backer board. It has excellent mold and moisture resistant properties and also bonds well with the silicone adhesives commonly used in a tub or shower surround application. It is easy to install with screws, and is, as far as we are concerned, to be the best single application tub and shower surround backer available today. Densshield is also easily accessible at most local home improvement stores.
What to do after shower base is set?
After you set the shower or tub base in place- have a plumber or qualified individual tighten the shower drain and the overflow for a tub. Check for leaks at this time.
How to contact a shower installer in Minneapolis?
Call 651-315-9131 For Professional Shower Enclosure Installation In The Minneapolis Area.
What is the standard shower base?
Standard shower bases are like standard bathtubs. Their actual measurements are generally 1/8″ short of your wall studs on all sides for ease of installation. Drain locations are generally centered on a shower base except when doing a tub to shower conversion. For a tub to shower conversion the drain will usually be centered on ...
How big is a bathtub?
The size of the inner basin can vary, depending on the thickness of the tub surround, but on average measures 55 inches by 24 inches at the top of the basin, and 45 inches in length and 22 inches in width at the bottom of the tub, due to the slight slant of the tub walls. That provides enough space for an average-size adult to fully submerge his ...
How big is a corner tub?
The average corner tub is 60 inches at its widest point, 60 inches in length, and 20 inches high. If you have a smaller bathroom but your heart is set on a corner tub, you’ll find models that are 48 inches by 48 inches by 18 inches. And of course, if space is not an issue, there are king-size corner tubs that measure 72 inches by 72 inches by 20 ...
How long is an extra large tub?
As a general rule, extra-large alcove tubs are around 72 inches long, ...
How deep is a western tub?
Many western soaking tubs, especially deeper ones (some are as deep as 34 inches) have built-in seats so the bather can sit rather than crouch. Because they are designed for bathing upright, these freestanding tubs are often shorter than other bathtub types, some as small as 40 inches in diameter. Advertisement.
How deep is a Japanese soaking tub?
But what sets these tubs apart from other styles is their height: As a general rule, an ofuro is at least 27 inches deep, and the bather crouches on the tub floor submerge up to the neck. Many western soaking tubs, especially deeper ones (some are as deep as 34 inches) have built-in seats so the bather can sit rather than crouch. Because they are designed for bathing upright, these freestanding tubs are often shorter than other bathtub types, some as small as 40 inches in diameter.
How long is an oval tub?
Oval freestanding tubs sit directly on the bathroom floor, and while styles vary, most have a sleek, minimalist appearance that works well in any modern decorating style. As with clawfoot variety, there are many bathtub sizes to choose from, but the most popular is 60 inches long, 41 inches wide, and 24 inches deep. That provides ample space for relaxing, particularly for the plus-size bather. If that’s too much tub for your space, you’ll also find oval freestanding tubs as small as 55 inches by 27 inches by 15 inches. If you have the room, and really love to luxuriate in the bath, there are oval freestanding tubs as long as 72 inches.
What are the two most common styles for a freestanding tub?
The two most common styles for the freestanding tub are clawfoot and oval.
How big is a shower?
The common dimensions for this size is either 9×3 or 8×4 which consists of the small range of things. Medium sizes are around 50 square feet with large sizes landing around 60 square feet and beyond.
What is the average size bathroom?
An average sized bathroom is anywhere between 36-40 square feet for an apartment or small home. This size is the general size as it encompasses both ¾ baths as well as full baths, giving you just about enough room for a shower, a bath, a sink and a toilet. For a larger home, the average size fluctuates between 40-100 square feet depending on the size of the property.
How big is a handicapped bathroom?
Handicapped bathrooms require at least 3×5 or 15 square feet to be considered a handicapped accessible bathroom. The size itself is not so important, more that the room is a diameter of 5 inches, allowing a wheelchair to move freely without being stuck. The doorway to this bathroom has to be at least 32-36 inches or 2.5 feet wide. The sink cannot be higher than 36 inches high with no more than 2 inches of counter space in between. Lastly, the toilet must be between 17-19 inches off the floor. The handle cannot be higher than 44 inches off the floor. Safety bars and other hand hold supports are also required for a handicap assisted bathroom.
How many square feet are needed for a bathroom?
For a shower, to be installed, at least 30-36 square feet is required. For a full bath consisting of both a shower and a bathtub, you will need at least 40 square feet . Below are common bathroom size layouts ranging from small, medium and large.
How wide is a bathroom door?
The doorway to this bathroom has to be at least 32-36 inches or 2.5 feet wide. The sink cannot be higher than 36 inches high with no more than 2 inches of counter space in between. Lastly, the toilet must be between 17-19 inches off the floor. The handle cannot be higher than 44 inches off the floor.
How many square feet are there in a walk in shower?
A small bathroom with a walk-in shower starts at around 36 square feet , with 8×4 being a typical size. For the purposes of most walk-in showers, the length needs to be around 4 yards at least to support the walk-in shower. From this point, the dimensions are the same as a bathroom with a shower-medium sizes are around 50 square feet, large sizes are 60 square feet and beyond.
What is the difference between a walk in shower and a walk in shower?
The only difference is that these need to be much longer in length to support a larger shower compared to other designs that only need to support a typical box shower.
How to measure the width of a shower?
Using your tape measure, measure the width of your shower from one side of the wall to the other. Measure the width in three spots – along the base, middle, and top. See Image 1. If you have a neo-angle shower, measure the width in sections along the base of the shower pan. See Image 2.
How to tell if shower wall is plumb?
To check if your shower walls are plumb, place your level flat against each shower wall. Look at the bu bble on the level and see if it is centered between the two indication lines. If the bubble is centered, the wall is plumb. If the bubble is not centered, angle the level away from the wall until it is.
What is a hinged shower door?
Hinged: This popular door is held to your shower wall or a fixed glass piece with hinges. The glass panel of a hinged door opens outward.
Can you install a shower door if the wall is straight?
Older homes or showers may not have walls that are perfectly straight. If your wall is plumb, meaning straight up and down, you should have a worry-free shower door installation. If your walls are not plumb, you should seek the help of a professional when installing your shower door.
