How do you make a cardboard Transformer costume?
- Step 1: Cut Out the Silhouette. Cut the box open and into two pieces.
- Step 2: Cut a Second Silhouette.
- Step 3: Secure Flaps Inside the Box.
- Step 4: Create a Hood and Trunk.
- Step 5: Make a Spoiler.
- Step 6: Paint It Red.
- Step 7: Make the Wheels.
- Step 8: Create Wheel Rims.
Full Answer
Can you make a homemade transformer costume?
I’m sure you saw that video a few years back of a Bumblebee homemade Transformer costume that actually transformed. Like most children, I’m sure your child begged you to make one for him/her. It is very cool, but there is very little information on how exactly to make a homemade Transformer costume.
What do I need to make a box out of cardboard?
First thing you will need are large flats of cardboard. I got mine for free at The Home Depot (they use them to divide pallet sized items delivered to them). Next, get yourself a long metal yardstick, some box cutters, and a hot glue gun with a whole lot of glue.
Is there such a thing as a homemade bumblebee costume?
I’m sure you saw that video a few years back of a Bumblebee homemade Transformer costume that actually transformed. Like most children, I’m sure your child begged you to make one for him/her.
How do you make an adult transformer costume?
1:163:00How to Make a Transformers Costume - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake it off and cut out holes for the eyes paint. Two ping-pong paddles in a solid color and glueMoreTake it off and cut out holes for the eyes paint. Two ping-pong paddles in a solid color and glue them upside down on side of the head box they make great antenna.
How do you make an Optimus Prime cardboard costume?
1:3916:14Make Your Own Optimus Prime With Cardboard - DIY Costume SquadYouTubeStart of suggested clipEnd of suggested clipKind of just eyeballing a square from a head. So I have a hole cut for my head and I'm going to needMoreKind of just eyeballing a square from a head. So I have a hole cut for my head and I'm going to need to cut some holes on the side for my. Arms.
How do you make a paper Optimus Prime?
0:345:38I Made a Transforming Paper Optimus Prime | Art/Craft Challenge - YouTubeYouTubeStart of suggested clipEnd of suggested clipThat will be going the opposite. Way. And after those lines are in i'll use a ruler to keep the foldMoreThat will be going the opposite. Way. And after those lines are in i'll use a ruler to keep the fold straight and kind of fold over like this once the folds are done i'll make sure it's the right.
How do you make a bumblebee costume?
DirectionsCut strips of Black Duck Tape® to fit on the front and back of the tee shirt.Carefully place the stripes onto the shirt.Cover a piece of cardboard with White Duck Tape® and cut out wing shapes. ... Attach the wings and cone to the finished tee shirt, and you're ready to for a fun night of trick-or-treating!
How can I make transformer?
2:4511:12Is it easy to create your own Transformer? Everything you need ...YouTubeStart of suggested clipEnd of suggested clipWe can measure around 15 point 4 volts AC RMS at the secondary coil. The way this works is thatMoreWe can measure around 15 point 4 volts AC RMS at the secondary coil. The way this works is that after applying the mains voltage to the primary coil as sine. Current starts flowing through the coil.
How do I turn my Optimus Prime toy into a truck?
4:128:27Transformers Optimus Prime Roll n Change Dinobots Unite Cyberverse ...YouTubeStart of suggested clipEnd of suggested clipAnd close that up it locks back here and then there's another little lock. Piece right there nowMoreAnd close that up it locks back here and then there's another little lock. Piece right there now with the front with the front we're going to bring his shoulders. Back.
How do you make paper Megatron?
2:4610:59How To Make A Transforming Papercraft Megatron - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere if you can see that right there an edge just a tiny tab I grew that on just to hold this any.MoreThere if you can see that right there an edge just a tiny tab I grew that on just to hold this any. Better. So you don't need to do that to. But anyway then you just put this down fold.
How do you make a Papercraft jazz?
1:153:50How To Make A Papercraft Jazz - YouTubeYouTubeStart of suggested clipEnd of suggested clipStay straight and just pull out feet fold those in place you can fold. This part right here justMoreStay straight and just pull out feet fold those in place you can fold. This part right here just fold that down.
What is a step up transformer?
A step-up transformer is a transformer that increases the voltage from the primary coil to the secondary coil while managing the same power at the rated frequency in both coils. It converts low voltage & high current from the primary side to the high voltage & low current on the secondary side of the transformer.
How do you make a hornet costume?
0:144:19Hornet from Hollow knight - Cosplay tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipPart to be able to carve out the shape of the mask i covered it with expanding foam expanding foamMorePart to be able to carve out the shape of the mask i covered it with expanding foam expanding foam usually has a cancerous material in the gas that comes from it as it dries.
How do you make realistic bee wings?
2:566:27How to make Costume Wings II Bumblebee Costume - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can use the elastic just like this or I chose to add a teal ribbon to the elastic using myMoreYou can use the elastic just like this or I chose to add a teal ribbon to the elastic using my sewing machine to make it look more like bumblebees actual wings.
How do you make a bee headband?
Directions:Glue each pipe cleaner to a puff ball.Allow to dry.Using a pencil or pen, carefully twist the pipe cleaner into a spiral.Twist the free end of the pipe cleaner around the headband a few times, and them back around the pipe cleaner to attach.Adjust the "flop" to your desired look, and you're done!
How do you make a simple paper robot?
To make a paper robot, first make a small cube and a larger rectangular cube from cardstock. Then, cover the cubes with tin foil and glue them together to make the robot's head and body. Next, cut colored construction paper into strips, fold them into accordion pleats, and attach them for arms.
How do you make a transforming paper airplane?
Paper Airplane DIYFold the paper in half horizontally.Unfold the paper and fold each of the top corners into the center line.Fold the peak down to meet the edge of the previous fold.Fold the upper sides into the center line.Fold the top edge 1/2” away from you.Fold the plane in half towards you.More items...
Making a Homemade Transformer Costume
First thing you will need are large flats of cardboard. I got mine for free at The Home Depot (they use them to divide pallet sized items delivered to them). Next, get yourself a long metal yardstick, some box cutters, and a hot glue gun with a whole lot of glue.
Making the Cuts
If everything looks good, start cutting it up. You need to cut the car into three major pieces; The front section, the middle section, and the back section. Basically, the front section is where your kid’s head will come out (out of the hood/air scoop).
Painting the Costume
After that, you only have to worry about the painting it. That part was pretty fun. The Home Depot has a yellow that is exactly the right color. I think it’s called “Sunrise Yellow” or something like that. Just make sure to prime the cardboard pretty good before painting.
Step 1: Supplies
tape (to make sure the costume is extra sturdy) very sharp and strong knife and scissors spray or canned paint (youl probaly need alot of paint) of corse boxes an auto bot stencil (you can print one on the computer)
Step 2: Types of Boxes
you will need one medium box or if needed a big one but i doubt it medium seems small but actually is perfect size (this costume is not recomended if your very short) youl also need 2 capri sun boxes and probally about 2 any size spare boxes if you mess up
Step 3: How to Make the Body
the first cuts you should make ar up the middle on the two long and skinny sides so you can fold the box.Next make a hole at the top of the box for you head.Next in case you didnt allready do this fold out the tabs on the bottom so you can put on the box.Next make 2 holes on the sides for your arms.Last put duct tape all along the middle of the top for more sturdyness..
Step 4: Making the Arms Legs and Shoulders
for the arms just cut the long tabs off the spare boxes.For the legs just fold out the tabs of the caprisun boxes and slip them on (if the legs slip down put a pir of thick long socks that go up to you knees or put an extra pair of pants on.The shoulder pieces are optional but make the costume look better to make them cut the small tabs off the spare boxes. PS:to put the arm and shoulder pieces on use velcroe or tape..
Step 5: Exaust Pipes
To make the pipes just cut pieces of cardboard out of the spare boxes in the shape of the ones in the picture.I suggest not to play with the pipes they bend easily like mine did wich you will see wat i mean in another picture at the end.If you make the shoulder pieces i recamend you tape the pipes to them if not tape them to the body like mine.
