How do you light a ProCom gas heater?
- STOP!
- Make sure equipment shutoff valve is fully open.
- Turn control knob clockwise.
- Wait five (5) minutes to clear out any gas.
- Turn control knob counterclockwise.
- With control knob pressed in, push down and release ignitor button.
- Keep control knob pressed in for 30 seconds after lighting pilot.
Full Answer
How to light the pilot light on a gas heater?
Here is how to light the pilot light on a gas heater. lighting the pilot light on a gas heater is simple to do. Turn the thermostat to its lowest setting. Turn the gas knob to the OFF setting and wait 5 minutes to clear out any gas. If you smell gas, don't continue to light the gas heater and call a professional heater repair person for help.
What do you need to light a propane heater?
To light the propane heater, all you need is a propane tank and matches or a lighter. Switching it off when you're finished is easy; just make sure you store it away properly to prevent damage. Get a propane heater that's the right size for what you need it for. Generally, the bigger the propane heater, the more heat and carbon monoxide it'll make.
How do you light the pilot on a Kenmore gas range?
Turn the gas knob to the pilot setting, press it in and hold it, light the pilot while holding the gas knob down for a minute. Release the gas knob and turn it to the ON position.
How do you light a pellet stove top burner?
Push in the button on the safety shut-off valve. Find the button at the end of the stem holding the mesh screen. Keep the match in front of the mesh screen and hold the button in until the burner lights. When it lights, hold the button for a further 30 seconds, releasing it slowly when you're finished.
How to test if a burner is not light?
Solenoid “torqued” too tight: With a flat-head screwdriver, turn the solenoid counter-clockwise to loosen. Turn solenoid clock wise until thumb-tight.
How high should ventless heaters be?
Manufacturers of vent-free appliances typically to not recommend not using their products above 4500 –5000 FT. The higher the altitude may cause pilot outages, due to the incomplete combustion of the gas caused by the low oxygen level. Vented heaters are adapted for use at a higher altitude.
What happens if you use a propane tank?
If a smaller tank is used the propane liquid does not have enough pressure to vaporize, the heater may begin to run improperly. This can also damage the internal regulator. The amount of propane gas ready for use from propane tanks varies. Two factors decide this amount: The amount of propane gas in tank (s) The temperature of tank (s) ...
How far away from propane tank should I put a two stage system?
If the propane tank is 15’ or more from the appliance, a “Two-Stage System” is recommended because of the propane required for the appliance to run correctly and efficiently. Integral Twins. Two Stage System.
Why does my propane tank shut down?
The colder the outside temperature, the slower the vaporization rate of the propane, the LP inside the tank will not vaporize fast enough to operate the appliance and will create frost on the outside of the tank and cause the unit to shut down due to the lack of fuel.
What is infrared heat?
Infrared (Plaque) Heats like the sun, radiating warmth, directly heating the objects in the room first, heating outward. Feels more like standing in front of a fire. Typically works better in un-insulated areas as they will heat objects before the air.
Can you use a ventless gas stove?
Yes, most states in the US allow for the sale and installation of vent-free “supplemental” gas heat appliances. ProCom Ventless products are equipped with an ODS pilot assembly, precision-engineered burners for clean burn and a non-adjustable regulator to prevent over-firing.