How do you lift a washer over a drain pan?
- Turn off the power to the washer and unplug it.
- Lift the washer drain line from the fixture on the wall.
- Unscrew the drain fitting from the inside of the drain pan.
- Measure the size of the hole in the drain pan.
How do you install a drain pan on a washing machine?
The simplest method of installing a washer drain pan is using two people on either side to lift it. Once they have raised the washer a few inches off the ground, a third person or a spare foot (be careful) can slide the pan underneath. Lower the washing machine back down inside the pan.
How do you lift a washing machine without damaging the wall?
The beam should be tall enough so that the ramp doesn't interfere with the wall of the pan when maneuvering the washer. Once the back edge of the washing machine is in the pan, slide the 2x4 ramps out from underneath, gently lowering the rest of the washer into place.
How do you fix a leaky washing machine drain pipe?
Place the drain pipe and install the it in the pre-cut hole. Place the washer back into position over the new drain pan. Use the carpenters level to check that the washer is level and if it isn’t adjust the drain pan until it is. Reconnect the power and all of the hoses. Turn the water supply back on.
How do you level a washing machine with a drip pan?
How to Level a Washing Machine in a Drip Pan. As a solution, manufacturers design washing machines with four adjustable feet to keep the washer as level as possible. Placing the washer into a drip pan is a practical way to prevent water damage if the washer leaks; the permanently affixed pan can catch any leaks.
How do you lift a washing machine over a drain pan?
Old-Fashioned LiftingThe simplest method of installing a washer drain pan is using two people on either side to lift it.Once they have raised the washer a few inches off the ground, a third person or a spare foot (be careful) can slide the pan underneath.
How do you move a washing machine pan?
0:215:57How to remove a washer without cracking drain pan - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe would go to lift the washer out of that drape.MoreWe would go to lift the washer out of that drape.
How can I lift my washing machine by myself?
Grab the top of the machine at the back. Tilt the device towards you by pulling the top towards you and taking one step back. If you're holding the bottom, grab the front leg on one side and the back of the washing machine on the other side.
How do I get the tray under my washing machine?
1:064:36How a DRIP PAN underneath your washer CAN break your WasherYouTubeStart of suggested clipEnd of suggested clipI'm sorry let's say that you had your washer you got a Wow some tighter a little rustic but you canMoreI'm sorry let's say that you had your washer you got a Wow some tighter a little rustic but you can take a wrench. And I just twist them lefty loosey righty tighty.
Should I put a drain pan under my washer?
Drain pans aren't a requirement for your washer, but they are an inexpensive and simple way of protecting your home by catching small leaks and reducing the amount of water damage from broken hoses. If your laundry room is upstairs, a drain pan is recommended to protect against leaks that can seep into the rooms below.
Are washer pans required by code?
The truth is, drain pans on washing machines are not a must. But they are required for safety reasons by the local code enforcement agency in most jurisdictions and can help mitigate leakages and flooding.
How do you lift a washer on a platform?
1:463:24How to Install the Pedestal on Your Whirlpool Washing MachineYouTubeStart of suggested clipEnd of suggested clipSlide the pedestals keyhole slots over the two partially installed screws now secure the pedestal toMoreSlide the pedestals keyhole slots over the two partially installed screws now secure the pedestal to the washing machine by installing the two remaining hex head sheet metal.
How do you move heavy appliances by yourself?
0:382:12How to Move Heavy Appliances without Scratching Floor - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo it's easy to tilt the appliance. Just enough to get the track under the feet. I slide the trackMoreSo it's easy to tilt the appliance. Just enough to get the track under the feet. I slide the track under the appliance. Until I hit the back leg.
How heavy is a washer?
A large capacity washing machine can weigh almost 230 pounds. A medium-capacity top-loading washing machine weighs around 150 pounds while a medium front-loading washer weight can weigh as much as 180 pounds. Tip: If you can't secure enough help to move your washer, consider hiring professional movers.
What can I put under my washing machine to protect the floor?
Anti-Skid Pads and Plywood Install anti-vibration pads under the feet of each appliance to create a buffer between the units and the floors. For further protection, measure the footprint of the washer and dryer as they sit together, and then cut a piece of plywood finished with polyurethane to this size.
Why is there water in my washing machine tray?
If your washing machine detergent drawer is filling up with water, it could be caused by the nozzles being blocked.
How to remove straps from a washing machine?
Have two people on opposite sides place the straps around their forearms/waist. Lift the washing machine up and slide the pan underneath. Lower the washing machine onto the pan, and remove the straps from underneath.
How to get 2x4s out of pan?
Walk the washer up to the pan. Tilt the washer back towards you and walk it over the pan until the 2x4s are at about half of the depth of the washer. Now tilt the washer back the opposite direction and continue to walk it towards the back of the pan.
How much does a washing machine weigh?
The average weight of washing machines is 180 lbs. , with larger washers being upwards of 200 lbs. Know your limits and use appropriate tools (like other helpers) to lighten the load. Always be mindful of the washing machine toppling over while in the process of shifting or lifting.
Can you slide the pan underneath the washer?
Once they have raised the washer a few inches off the ground, a third person or a spare foot (be careful) can slide the pan underneath. Lower the washing machine back down inside the pan. No cords or hoses need to be disconnected, which makes this one of the quicker methods as well.
Can you lay a washing machine on its side?
Make sure not to rest the washer on the walls of the pan. It's generally advised to never lay a washing machine on its side. Not only can this disrupt the drum alignment, but it can also mess up the washer's transmission.
Can a sliding washer cause scratches?
Sliding and repositioning your washer can cause scratches and dents on the wall and floor. Protect your hardware and your home by using furniture blankets where applicable. Our pans are built strong, but the walls can bend from the full weight of a washing machine. Make sure not to rest the washer on the walls of the pan.
What to do if your washer is not level?
When the washer is not level after placing it in the drip pan, you need to remove it from the pan to check the foot adjustments. The drip pan's edges prevent comfortable access to the feet with a wrench.
How many feet should a washing machine have?
As a solution, manufacturers design washing machines with four adjustable feet to keep the washer as level as possible. Placing the washer into a drip pan is a practical way to prevent water damage if the washer leaks; the permanently affixed pan can catch any leaks. However, the washer should be roughly leveled before being inserted into ...
Why does my washing machine make a lot of noise?
A home's washing machine spins rapidly during certain wash cycles, such as the final drying process. Since the spinning action is so fast, a poorly leveled washer can vibrate and cause a lot of noise. As a solution, manufacturers design washing machines with four adjustable feet to keep the washer as level as possible.
What should the floor surface beside a pan be?
The floor surface beside the pan should be about the same level as the pan's interior surface since it is screwed down. Have an assistant available to help with the movement of the washer since they are typically heavy.
Can a loose pan cause a wrong level?
Additionally, check that the pan is securely screwed to the floor. A loose pan can cause the level to be incorrect. Writer Bio. Writing professionally since 2010, Amy Rodriguez cultivates successful cacti, succulents, bulbs, carnivorous plants and orchids at home.
What is a drain pan?
Home appliances that handle water often use drain pans for accidental water spillage. These pans are placed under the washer and typically use either bottom or side drains to channel the water out of the pan. Drain pans like these are often plastic or other composite materials that crack and leak over time. If you plan on updating your home ...
Why replace a questionable drain pan?
If you plan on updating your home or laundry room, replacing questionable drain pans is an affordable and simple way to ensure protection against leaking or dated washers.
How long does it take for silicone to dry before washing?
Tips. If you still have leaks after you've tightened everything, dry off the fittings and place silicone around the them. Wait 24 hours for the silicone to dry before using the washer. This is a good opportunity to replace the rubber hoses. They are inexpensive and a good way to ensure that they also do not leak.
