Step 1. Loosen the locking nuts of the leveling feet using a wrench. Step 2. Turn the clamp nut clockwise to loosen. Level the washing machine by manually adjusting the leveling feet with a spanner. To raise the height, turn the clamp (height nut) counterclockwise.
How do I level my Samsung washing machine?
Method 1 Method 1 of 3: Levelling from Side-to-Side and Front-to-Back Download Article
- Start with the legs as short as possible when installing a washer. ...
- Lay a spirit level from side-to-side on top of the machine. The small bubble in a spirit level tells you if the surface is flat.
- Adjust one or both front legs until the spirit level bubble is centered. ...
- Level the machine from front-to-back (for self-levelling rear legs). ...
How to level a Samsung top load washing machine?
Top loader washing machines
- Extra Rinse
- Aqua Jet
- Setting a higher soil level
- Using the Heavy Duty cycle instead of Normal Not all options are available on all models. ...
- Bulky items such as comforters, blankets and sheets will often not receive enough water on Normal or Heavy Duty cycles, and should only be washed using the Bedding cycle. ...
How do you reset a Samsung washer?
To do a hard reset on a Samsung washing machine, do the following:
- Disconnect the washer from its power source.
- Leave the machine unplugged for about 5 minutes.
- Plug the machine back.
What are the problems with Samsung washers?
Why Samsung Washing machine Won’t Spin
- SuspensionWorn Out. ...
- Shock Absorbers (Front Loading Machine Only) There are four shock absorbers that hold the plastic drum and compensate for all vibrations coming from the drum during the spin cycle.
- Faulty Door Lock (Samsung top load washer problems spin cycle) The Samsung washers have a door lock with a switch. ...
- Broken Plastic Bracket. ...
How do you fix a unbalanced Samsung top load washer?
0:003:28Samsung washer top loading dc code unbalance spin cycle - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere's a little metal release tab. You should be able to feel it. And once you hit it you'll beMoreThere's a little metal release tab. You should be able to feel it. And once you hit it you'll be able to feel it as you push in it springs. Back.
How do I balance my Samsung washer?
Remove all laundry or any other contents in the machine.Power off, and then power on the washing machine on again.Hold down Temp.Press START/PAUSE to run the Calibration cycle.The drum will rotate clockwise and counterclockwise for about 3 minutes.More items...•
How do you Relevel a top load washer?
0:522:04Leveling a Topload Washer - YouTubeYouTubeStart of suggested clipEnd of suggested clipBoth side to side and front to back. This is accomplished by turning the leg clockwise to raise theMoreBoth side to side and front to back. This is accomplished by turning the leg clockwise to raise the washer and counterclockwise to lower the washer adjust.
How do I stop my Samsung Washer from shaking?
[Solution]Make sure the shipping bolts have been removed.Be sure your washer is properly installed. Pay special attention to the level, it is crucial to minimize vibration.Check the amount of load on the washer. Overloading or overloading can cause severe damage and vibration. ... Reposition the load.
Why does my Samsung washer make a knocking sound?
In most cases, this noise is due to overloading. To test if service is required, run a cycle with approximately 4 soaking wet bath towels (or a load with similar weight). If the noise occurs during this cycle, visit our Support Center to request service.
How do I calibrate my Samsung?
How to Calibrate Your Android TouchscreenInstall and launch the Touchscreen Calibration app.Tap Calibrate.Follow the instructions to perform actions on the Test Pad in the app until your device passes all the tests.After all the tests are complete, you receive a notification indicating the calibration is done.More items...•
How do you balance an unbalanced washing machine?
How to Balance Front Load WashersOpen the front-load washer door. Manually redistribute the load inside the drum. ... Add more items to the wash. A single, bulky item, such as a comforter or blanket can cause the unbalanced load. ... Avoid overloading your front-load washer.
How do I even out my washing machine?
1:052:42Front Load Washer Vibration - Level Legs - YouTubeYouTubeStart of suggested clipEnd of suggested clipTurn the legs clockwise. The washer and counterclockwise to raise the washer adjust. The front rightMoreTurn the legs clockwise. The washer and counterclockwise to raise the washer adjust. The front right leg until the washer is.
Does a washing machine need to be perfectly level?
The wash basket may also spin unevenly if the washing machine is not level. The washer must be level both from front to back and from side to side, and all four of its feet must be touching the ground. If you can rock the machine back and forth diagonally from corner to corner, its feet are not secure and level.
Why is my new Samsung washer shaking violently?
Your washing machine may shake, move, and make noise while spinning. This can happen when the four washing machine legs are not all making secure contact with the ground, or if a large bulky item or huge amount of laundry is in the washing machine.
Why is my top load washer shaking violently?
Your washing machine needs to stand level and balanced on its feet to function properly. An unbalanced appliance will vibrate and shake during operation. Try rocking the appliance from side to side or back and forth. If it's rocking a lot, your flooring or appliance's feet may be uneven.
Why is my washing machine jumping around when it spins?
The most common cause of when a washing machine jumps and bangs on spin is an uneven load. Occasional jumping around may not be anything to worry about if it isn't banging too much. However, regular or severe banging on the sides should be a cause for concern.
Required tools
These tools may be needed for leveling. (These tools are not provided with the washing machine.)
If the problem persists,
please contact us via Chat so that our agents can provide you with a solution.
Face to face Support
Whether your product is in warranty or out of warranty, we're here to help.
How to level a washing machine without a level tool?
1. Place your hands on opposite sides of the washer and gently try to rock the washing machine from corner to corner. If the washing machine rocks in any direction, turn the front leveling feet clockwise to lower the washing machine, and counterclockwise to raise it. 2.
How to check if washing machine is level?
1. Slide the washing machine into position. 2. Open the lid of the washing machine, and pour the water into the tub just below the pulsator level.
How to lower a washing machine if it rocks?
If the washing machine rocks in any direction, turn the front leveling feet clockwise to lower the washing machine, and counterclockwise to raise it. 2. Once the washing machiner has been leveled and no more adjustments are needed, tighten the locking nut on each leg to ensure it stays in place. Tighten it all the way flush against the bottom ...
How to level a washing machine?
1. Start with the legs as short as possible when installing a washer. Washing machines have adjustable legs that can extend out several inches/centimeters as needed in order to level the machine. However, the machine will be more stable if the legs are extended as little as is necessary to level the washer. So, if you’re installing a new washer ...
How to adjust a washing machine leg?
Plastic legs are easier to adjust than metal ones, but it's difficult to do so by hand. Instead, grab some adjustable pliers and pull the handles of the pliers apart until the prongs are wide enough to grip the “feet” (the wider base) of the washing machine leg.
How to adjust a washer nut?
Metal legs have a locking nut at the base of the leg, against the underside of the washing machine. Adjust the wrench until the jaws fit snugly against the locking nut, then turn the nut clockwise until it starts sliding down the leg.
What does a small bubble on a washing machine mean?
The small bubble in a spirit level tells you if the surface is flat. There's a strong chance that the bubble will be off-center when you put it down, which confirms that your washing machine is uneven. Whichever side the bubble sways towards is higher off the ground.
What does a spirit level on a washing machine tell you?
Lay a spirit level from side-to-side on top of the machine. The small bubble in a spirit level tells you if the surface is flat.
How to adjust spirit level?
For metal legs, you’ll loosen the locking nut with a wrench, then turn the leg clockwise (to shorten it) or counterclockwise (to extend it). With plastic legs, use adjustable pliers to grip the leg and turn it either clockwise or counterclockwise.
