Determining The Correct SharkBite Fitting Size
| SharkBite Fitting Size | Nominal Pipe Diameter | Pipe OD | Pipe Insertion Depth (IN) | Pipe Insertion Depth (MM) |
| 1/4 in. | 1/4 in. CTS | 3/8 in. | 0.82 | 21 |
| 3/8 in. | 3/8 in. CTS | 1/2 in. | 0.94 | 24 |
| 1/2 in. | 1/2 in. CTS | 5/8 in. | 0.95 | 24 |
| 5/8 in. | 5/8 in. CTS | 3/4 in. | 1.13 | 29 |
How to install hot water heater with Sharkbite?
- Work in tight spaces
- Easily connect water heaters with existing pipes that don’t line up
- Have the versatility to connect the water heater to almost any pipe material
How to install a shower valve with Sharkbite?
Product Overview
- Lead free DZR brass construction for durability and reliability
- Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions, or tools
How to install Sharkbite quarter turn valve?
Usage
- Sleek chrome finish for an attractive appearance.
- Quarter-turn full-port brass ball valve.
- Compatible with PEX, copper, CPVC and PE-RT HDPE pipe
- No special tools, crimping, glue or soldering is needed.
- Can be installed in wet lines
- Ideal for working in tight spaces.
- Remove using a Disconnect Clip or Disconnect Tongs (both sold separately).
How reliable are Sharkbite fittings?
How reliable are SharkBite plumbing fittings? Fact: Contractors who use SharkBite find it to be a dependable and safe solution in concealed spaces, including behind the wall and underground. For example, Clint McCannon, owner of Cannon Plumbing, used SharkBite PEX and EvoPEX™ to repipe an entire home, with no concern about failed fittings or leaks.
How do you fit a SharkBite fitting to a copper pipe?
4:276:36Replacing Copper Pipes and Fittings with SharkBite Push Fit ConnectorsYouTubeStart of suggested clipEnd of suggested clipSlide it onto the pipe just enough that allow the copper pipe to fit between it and the shutoffMoreSlide it onto the pipe just enough that allow the copper pipe to fit between it and the shutoff valve use the sharkbite tool that comes with the slip end fitting to unlock the sharkbite teeth.
How long do SharkBite fittings last on copper?
25 yearsHow long do SharkBite fittings last? SharkBite fittings last a long time. In fact, SharkBite warrants the fittings for 25 years when used with SharkBite tubing.Apr 4, 2019
Do professional plumbers use SharkBite?
You'll only use the tool to disconnect the fittings. The "tool" is a simple piece of U shaped plastic, slightly larger in diameter than the fitting. To answer your question, no, Shark Bite fittings are not recommended by professional plumbers.Nov 18, 2014
Should I sand copper pipe before SharkBite?
Do not sand the copper pipe – while it's the easiest way to smooth out the edge of the pipe, this practice should be avoided whenever possible since it disrupts the otherwise even pipe surface and may compromise the seal.
Why do plumbers hate SharkBites?
Jamming them in too quickly could cause damage to the O-ring resulting in a leaky pipe. ☆ If your pipes are PEX, then you'll have to use a special insert. This insert keeps the pipe from collapsing. The good news is that if you're using SharkBite, the insert is already built into the fitting.Feb 7, 2022
Why you shouldn't use SharkBite fittings?
A SharkBite fitting contains a rubber O-ring, which is not best for permanent connections. We don't recommend using a SharkBite fitting outside because sunlight can dry out the rubber O-ring and cause it to crack or split.Mar 8, 2019
Can you use SharkBite on copper?
SharkBite brass push-to-connect fittings are compatible with PEX, Copper, CPVC, PE-RT and SDR-9 HDPE pipe. SharkBite fittings come with a PEX stiffener pre-loaded into the fitting for PEX, PE-RT and SDR-9 HDPE. The PEX stiffener does not need to be removed for Copper or CPVC applications.
Do SharkBites ever leak?
SharkBite fittings can leak due to one of these reasons: The pipe was not properly deburred prior to installation. The pipe was not properly inserted. The pipe was not squarely cut.
Are SharkBites as good as solder?
So far they seem to be just as reliable, although given that they've only been on the market for a few years they don't have the same history as soldered connections. Here in the UK almost all new-build houses use push-fit connectors for concealed work as it's much quicker and easier.Nov 24, 2019
How far does pipe go into SharkBite fitting?
Pipe Insertion Depth ChartSharkBite Fitting SizeNominal Pipe SizePipe Insertion Depth (in.)1/2 in.1/2 in. CTS0.955/8 in.5/8 in. CTS1.133/4 in.3/4 in. CTS1.101 in.1 in. CTS1.315 more rows
Do you remove plastic from SharkBite fittings?
0:231:39Sharkbite Sleeve Removal - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst you would just s instructed you know gently remove the plastic fitting. From behind the wholeMoreFirst you would just s instructed you know gently remove the plastic fitting. From behind the whole ring. Then when it's loose. You can just take for whatever size pipe you have the deburr and
What is shark bite fitting?
Sharkbite Fittings are made by experts who have spent years using specialized tools to cut, mount and seal copper surfaces safely and efficiently. Often when working with copper pipes, there are tears, cuts, and nicks in the pipe, which in most cases results in uneven surfaces. These cuts and tears can cause leakages or bends. Shark Bite Fittings make it easy to mount and provide the superior gluing ability to ensure your work is done safely.
How much money can you save with Sharkbite fittings?
You can save hundreds or even thousands of dollars by using the right fitting. This is where SharkBite fittings come in. The technology behind SharkBite fittings is based on basic physics.
How Shark bites Works?
It allows you to connect copper tubing to other copper fittings using its advanced push-fit connection system. It works in two stages.
How long do sharkbite fittings last?
Since they are made of non-corrosive material, they last for up to 25 years with regular use and do not rust or corrode.
Why don't plumbers use push fit fittings?
Many plumbing companies will not use push-fit fittings because they feel strong enough to create a durable connection. Sometimes, this may be true—but not perhaps because these fittings are quick and easy to use.
How to find the right size pipe?
This is by measuring the inside diameters of the pipes, realizing that some sizes will fit over pipes that have been laid before them.
Can you use Sharkbite on copper pipes?
Installing SharkBite fittings on the copper pipe is easy, and a do-it- yourself project. You can tackle it at home, even if you aren’t an experienced DIYer. All you need is a pair of pliers to cut the copper pipe to size and pop them into the fittings.
Why does Sharkbite leak?
In general, SharkBite fittings only leak due to one of these reasons: The pipe was not properly deburred prior to installation. The pipe has scratches or debris on the outside that is preventing the O-ring from getting a watertight seal.
When to use PEX stiffener?
Use PEX stiffener (insert) when using push fittings with PEX tubing.
How to make a sharkbite pipe?
Hold the SharkBite fitting and push the pipe into the fitting with a twisting motion. Push the pipe into the fitting until you hear a "click" sound coming from the fitting. Look for the pencil mark that you made on the pipe. Make sure the mark is flush, or nearly flush, with the edge of the release ring on the SharkBite fitting. Push the pipe farther into the fitting if the mark is more than .05 inches from the release ring.
How to remove a leaking Sharkbite pipe?
Slide the SharkBite release tool up the pipe to the release ring on the leaking fitting. Push the tool toward the SharkBite fitting to depress the release ring. Pull the pipe out of the fitting with a twisting motion. Inspect and clean the end of the pipe and the fitting. Install the pipe again, making sure to fully seat the pipe into the SharkBite fitting.
How to remove sharkbite support collar?
Remove the PEX support collar from the SharkBite fitting if you are using copper or CPVC water lines and local codes prohibit the use of the support collar. Depress the SharkBite release ring with the release tool and pull the collar out of the fi tting with needle-nose pliers.
What is sharkbite fitting?
SharkBite fittings eliminate the need for solvents, crimpers and torches.
Why keep sharkbite fittings in tool box?
Consider keeping SharkBite fittings in your tool box for emergency repairs. A SharkBite fitting will be quicker and easier to install if you ever have a water line break in the middle of the night.
Do you need to check your plumbing codes before installing sharkbite?
Check your local plumbing codes before you install SharkBite fittings in your home. Wear eye protection when cutting and deburring pipes.
