how do you install beadboard over popcorn ceiling

How to Install Beadboard Ceiling over Popcorn

1. Prime both sides of each piece of beadboard paneling you will install.
2. Run a stud finder across the ceiling to locate the joists.
3. Place the first board in place on the ceiling, up against a wall.
4. Nail the beadboard to the joists by driving the nails at an angle through the tongue portion of the boards; the tongue should be facing away from the wall.

Full Answer

How to cover or insulate over a popcorn ceiling?

Is It Safe To Cover Popcorn Ceiling?

• Safe Options Of Covering Popcorn Ceilings. There is no denying the fact that popcorn ceilings bring displeasure to many homeowners. ...
• Choosing Insulation Board. Choosing an insulating board over your popcorn ceiling is a good choice because it assists in preventing airflow between the roof or unheated attic space.
• Covering Popcorn Ceiling Instructions. ...

How to cover popcorn ceiling with beadboard planks?

• $50 Home Depot gift card
• 1 bag of Command Picture Hanging Strips, hooks, and broom grippers
• 2 rolls of Scotch Blue painter's tape
• 2 rolls of Scotch-Brite Reusable Wipes
• 2 Scotch-Brite Heavy Duty Scrub Sponges
• 3 Scotch-Brite Dishwands
• All in One Hole Repair
• Box Lock packaging tape

What is the cheapest way to cover a popcorn ceiling?

To effectively hide your textured ceiling with wood planks, follow the procedure detailed below:

• Locate the rafters – using a stud finder, situate the ceiling joists and mark them out using tape or a marker pen. ...
• Cut out light fixture holes – using a jigsaw, create holes for the lighting fixtures and vents on the wood planks.
• Install the wood planks- install the wood planks by nailing them down to the popcorn ceiling. ...

More items...

How to plywood plank over popcorn ceiling?

• 6 sheets of 11/32 Plywood from Lowe’s – our room is roughly 15×15
• 1 Gallon of Premixed White Valspar Paint in High Hide White
• Paint Roller
• Saw to cut the plywood
• Nail Gun
• 2 inch Nails
• Ladder and Scaffolding

Can you put beadboard directly over popcorn ceiling?

Beadboard Planks Over Popcorn Ceiling DIY. Looking for a way to cover those outdated, popcorn ceilings while also adding character to your room? You can install beadboard planking directly on top of your textured ceilings. This DIY gives you step-by-step instructions.

How do you hang beadboard over a popcorn ceiling?

How to Install a Beadboard Ceiling Over PopcornPrime the Beadboard. Prime both sides of each piece of beadboard paneling you will install. ... Find the Joists. ... Ensure the Board is Parallel. ... Nail the Board to the Joists. ... Add the Next Board. ... Cut Around Light Fixtures. ... Attach the Molding.

How much does it cost to cover popcorn ceiling with beadboard?

Pricewise, plan to spend approximately $1.50 per square foot (planks only) to cover a ceiling. Professional installation could add another $2 to $3.50 per square foot.

How do you panel over a popcorn ceiling?

0:152:14How to Cover a Popcorn Ceiling with a DIY Coffered Ceiling - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure the lines are going the right way. Use a brad nailer like this Ryobi airstrike to hold theMoreMake sure the lines are going the right way. Use a brad nailer like this Ryobi airstrike to hold the beadboard into place be sure to use eye and ear protection for safety.

How can I cover my popcorn ceiling without removing it?

1:2113:34How To Cover Popcorn Ceiling Without Removing It - YouTubeYouTubeStart of suggested clipEnd of suggested clipI hold the taping knife into the corner at an angle. And then i drag it across the popcorn to evenlyMoreI hold the taping knife into the corner at an angle. And then i drag it across the popcorn to evenly distribute the joint. Compound.

What is the cheapest way to cover a popcorn ceiling?

Some of the cheapest options include covering it up with tongue-and-groove wood panels, drywall panels, prepared fiberboard ceiling planks/tiles, fabric, and paint patterns.

How do I hide beadboard on the ceiling?

Cut the last pieces of beadboard to fit on the other end of the ceiling with a jigsaw. Tack up a shoe, ogee or other decorative molding around the perimeter of the ceiling to hide the edge of the beadboard.

How do I install beadboard in a wall?

Place the first board in place on the ceiling, up against a wall. Use a laser level to check that the board is parallel to the wall across the room. If it isn't, adjust the board slightly until it is - any gap will be hidden on the where the beadboard meets the wall with molding.

How to Cover Popcorn Ceilings with Beadboard

Want to cover your popcorn ceilings with beadboard? You’ll love this simple how to!

How to cover popcorn ceiling with beadboard

Hate your popcorn ceiling? You can scrape it (we have a tutorial for that!) or, you can cover it. Beadboard is an easy way to DIY cover popcorn ceilings. Here's how we did it.