Receiving Helpdesk

how do you install a tetherball pole

by Evan Sawayn IV Published 3 years ago Updated 2 years ago

To install a tetherball pole in the ground:

  • You will need to dig a 2 foot deep hole in the ground about a foot wide in diameter.
  • Set the tetherball pole in the ground, and mix up a bag of concrete.
  • Pour in the concrete and hold the pole level until the concrete sets enough to keep the pole upright.
  • Let the concrete set overnight

You will need to dig a 2 foot deep hole in the ground about a foot wide in diameter. Set the tetherball pole in the ground, and mix up a bag of concrete. Pour in the concrete and hold the pole level until the concrete sets enough to keep the pole upright. Let the concrete set overnight.

How to install a tetherball pole in concrete?

Set the Tetherball Pole in the Concrete 1 Mix your concrete according to the directions on the bag, using your bucket or another suitable container. 2 It’s not necessary to mix it all at the same time. 3 When it’s ready, place your pole centered in the tire or hole and start to fill around it with concrete.

How do you set up a tetherball set?

Most tetherball sets come with a pole and rope of lengths that work together. If you’re piecing a set together yourself, you’ll want to set the pole up first. Then, let the ball hang on its own and make adjustments to the rope length from there.

How high should a tetherball ball be off the ground?

In either case, the rope is usually cut so the ball will hang 2 feet above the ground on any pole. A typical permanent tetherball pole will be 2 and 3/8 inches in diameter. A heavy duty permanent set may even be up to 3 inches in diameter, mostly used in parks or playgrounds.

How do you make a tire pole out of concrete?

Fill the inner edge of tire with concrete. Fill the rest of the tire with concrete. Drill holes in pole (if pole doesnt already have them) 2 holes at the bottom for rebar and 1 at top for rope. Insert eye bolt on top and rebar on bottom. Tie the rebar in place.

How much concrete do I need for a tether pole?

Materials Required:1-½-inch galvanized steel pipe of desired height plus 2 feet.Rebar – 2 pieces, 12 inches long.Concrete – 180 lbs.Eyebolt with washer and hex nut.Safety wire.Tetherball with rope (link to Amazon)Connecting hook for rope.

How high should a tetherball pole be?

The pole is often 10 feet (3.0 m) high, and can be as low as 7 feet (2.1 m) high depending upon the height of the players.

What can I use for a tetherball pole?

0:152:56Tether Ball Pole and Stand - DIY with a spare tire - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the basically takes a eight foot chain like fence post and i actually have one of the line capsMoreSo the basically takes a eight foot chain like fence post and i actually have one of the line caps and i use a line pole there so you can actually see the line cap right here. And you need a

How far should tetherball be from ground?

The standard pole length for tetherball should be 10-feet above the ground. This means that the average tetherball rope should be around 8-feet in length.

How do you secure a tetherball pole?

It's going to be buried in the cement, so you don't want it to poke out the top or the bottom of your tire. Slide in the rebar, and use the galvanized wire to secure them into place. On the opposite end of the pole, drill a hole for the eye bolt, and secure it with a washer and the 1/4 inch nut.

How long should a tetherball pole be?

A tetherball pole can be as small as 7 feet, depending on the size of the players. Typically adults will play on a 10 foot pole, and you'd see the 7 or 8 foot poles on school playgrounds.

How much space do you need for a tether ball?

Find a flat open playing area at least 20ft (6.1m) square. For best results many people prefer to anchor the tetherball pole and sleeve to the ground with cement.

How do I make my tether ball set Portable?

6:5015:34How to Make a DIY Portable Tetherball Court - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou want the pieces to stick out of your pole evenly on either side. So we'll adjust that to makeMoreYou want the pieces to stick out of your pole evenly on either side. So we'll adjust that to make sure the measurements even and then now it's time to secure them in place with a piece of tie wire.

How much is a tetherball set?

The cost of tetherball ranges from being free to play at a local park to hundreds of dollars for an industrial setup. However, for the casual backyard tetherball player, a reliable, quality tetherball set will cost around $60 to $70.

How do you make a tetherball base?

Step 1: Paint Tire. Make sure that your tire is clean and dry. ... Step 2: Drill Pipe for Rebar. ... Step 3: Prep for Concrete. ... Step 4: Add Concrete and Level Pole. ... Step 5: Add Decorative Stones. ... Step 6: Install Eye Bolt Into Cap Piece. ... Step 7: Hang the Ball. ... Step 8: Play.

Why did they get rid of tetherball?

Tetherball. While playing with this equipment, there was a high risk of the ball smashing your face or breaking your hands or fingers because of hitting the pole instead of the ball. Due to the number of complaints and restrictions, this equipment became extinct on most playgrounds.

What kind of rope is used for tetherball?

nylonTachikara T-Rope is a tetherball attachment rope made of nylon and measures 9.84 feet. Clip attaches to all standard tetherballs and poles.

How to play tetherball on a pole?

Once the cement dries, attach the tetherball and rope to the top of the pole using the mounting clip. Make sure that the rope is as long or as short as you'd like so that it doesn't drag the ball on the ground or hit any other items in the area. Figure out how far away you'll stand to play the game, then use the shovel to completely level out the area around the pole to that distance.

Is a tetherball pole a good thing?

A tetherball pole is a great item to install in your yard or elsewhere on your property if you have children. Tetherball is an easy game and a fun activity for children to enjoy when the weather is nice outside. A tetherball pole is also easy to install and takes up very little space. It requires very little maintenance and is inexpensive to build. Read on for a brief guide on how to install a tetherball pole properly.

What is the official height of a tetherball pole?

Tetherballs usually have a bar recessed in the top that the rope is tied to. Some simply have loops that protrude out, but this is less common as striking the loop with the hand can be painful. The pole is often 10 feet (3.0 m) high, and can be as low as 7 feet (2.1 m) high depending upon the height of the players.

How much space do you need for tetherball?

You ‘ll need a clear space of about 100 square feet to play tetherball. It doesn’t matter if it’s paved or grass, as long as it’s level. Once you ‘ve chosen your space, you ‘ll need to draw a circle on the ground of approximately 10 feet in diameter.

Is tetherball dangerous?

The issues that come with these tetherball poles is that children can be hit at high speeds by the ball or the rope, causing a variety of injuries and even knocking players onto the ground.

Can you catch the ball in tetherball?

Players are not allowed to touch the pole or the rope at any point during a tetherball game. Crossing over the line that defines a player’s territory is considered offsides. Throwing the ball is not allowed, and all strikes must bounce off the hands or forearms.

Who invented tetherball?

Tetherball was invented in Britain by at least as early as 1875. It may have been invented in Ireland, where some lucky, young Dubliner could have received a set for Christmas in 1875. Freeman’s Journal, ( Dublin, Ireland ), December 7, 1875, page 5.

How do you win tetherball?

To win a game of tetherball, you’ll need to wrap the ball around the pole until you run out of rope. Your opponent will be trying to wrap the ball around in the opposite direction as you. So you’ll need to undo their wrappings, or not allow your opponent to wrap the ball in their direction.

How do you cement a tetherball pole in a tire?

Drill holes into one of the ends of your line pole, in a cross pattern.

What is the official height of a tetherball pole?

Tetherballs usually have a bar recessed in the top that the rope is tied to. Some simply have loops that protrude out, but this is less common as striking the loop with the hand can be painful. The pole is often 10 feet (3.0 m) high, and can be as low as 7 feet (2.1 m) high depending upon the height of the players.

How much space do you need for tetherball?

You ‘ll need a clear space of about 100 square feet to play tetherball. It doesn’t matter if it’s paved or grass, as long as it’s level. Once you ‘ve chosen your space, you ‘ll need to draw a circle on the ground of approximately 10 feet in diameter.

Is tetherball dangerous?

The issues that come with these tetherball poles is that children can be hit at high speeds by the ball or the rope, causing a variety of injuries and even knocking players onto the ground.

Can you catch the ball in tetherball?

Players are not allowed to touch the pole or the rope at any point during a tetherball game. Crossing over the line that defines a player’s territory is considered offsides. Throwing the ball is not allowed, and all strikes must bounce off the hands or forearms.

Who invented tetherball?

Tetherball was invented in Britain by at least as early as 1875. It may have been invented in Ireland, where some lucky, young Dubliner could have received a set for Christmas in 1875. Freeman’s Journal, ( Dublin, Ireland ), December 7, 1875, page 5.

How much is a tetherball?

The best-rated product in Tetherball is the Portable Tetherball System. What is the price range for Tetherball? The average price for Tetherball ranges from $40 to $150.

How to mount a tetherball to a pole?

To mount the tetherball to the top of the pole, it is necessary to drill a hole in your galvanized steel pipe to hold an eyebolt. The loop of the eye bolt will be where the tetherball rope attaches to the pole.

How to make a tetherball set?

1. Plan the Pole’s Location, Height & Mounting Type. Before you purchase any materials to make your tetherball set, think about the location you’ll use for playing. Make sure there is enough room for the ball to swing around freely, plus plenty of space for players on both sides to move around.

How to drill a hole in a rebar pole?

Choose a drill bit that is slightly larger than the diameter of your rebar. Drill one hole about 1.5 inches from the bottom end of your pole, again drilling straight through both sides as you did with the previous hole. Then, turn the pole 90 degrees so your next hole will be perpendicular to the one you just finished.

How to stabilize a pole in concrete?

Insert the two pieces of rebar into the two holes you drilled at the bottom of the pole. The rebar will help to stabilize the pole in the concrete. After the rebar is inserted, we recommend wrapping a length of safety wire around both pieces of rebar and the pole to stop them from shifting out of place.

What is a tetherball made of?

Both types of ball are meant to be hit with any part of the hand, although a tetherball tends to be a bit harder; they are made of soft rubber material and feel similar to a soccer ball.

How much space do you need to play tetherball?

We recommend at least 100 square feet of open space to play tetherball, on level ground with no tripping hazards. An official tetherball court is a 20 foot diameter circle. When deciding on the height of your tetherball pole, it will depend mainly on who will be playing most often.

How high should a baseball pole be?

Regardless of how high the pole is, the ball should be hung so that it is 2 feet above the ground. The pole will need to be mounted into something sturdy to keep it from moving around, even if players put a lot of strength into hitting the ball.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9