How do you install a Stihl brush cutter blade?
- Turn the weed eater off and unplug it if necessary.
- Locate the small cylinder with a hole in it that extends up from the base of the head.
- Rotate the nut at the bottom of the mowing head counterclockwise to remove it.
- Pull up on the head to remove it.
- Put a new thrust plate onto the shaft, if needed.
How to install a cutting blade on a Stihl Weedeater?
How to Install a Cutting Blade on a Stihl Trimmer. An Allen wrench is useful when installing a cutting blade. 1 Replace the String on a Weed Eater With a Plastic Blade. 2 Change the Trimmer Head on a Stihl Trimmer. 3 Install a Steel Brush Cutter on a Line Trimmer. 4 Removing the Spool Head on an FS45 Stihl Weedeater.
How do you put a cutting blade on a trimmer head?
Slide the cutting blade onto the shaft on the trimmer head. Ensure the blade hole seats onto the collar on the thrust plate and that the cutting blade tips point in the clockwise direction. Place a thrust washer and rider plate on the shaft, on top of the cutting blade.
How to install Stihl cutting blades type 230-4 and 230-8?
The process for installing Stihl cutting blades type 230-4 and 230-8 on Stihl trimmer models FS 90, FS 120, FS 200 and FS 250 is the same once you have the mower head removed. Turn off your Stihl trimmer and allow it to cool if you have been running its engine. Remove the spark plug wire from the spark plug.
How do you use a thrust cutting blade?
Ensure the blade hole seats onto the collar on the thrust plate and that the cutting blade tips point in the clockwise direction. Place a thrust washer and rider plate on the shaft, on top of the cutting blade.
How do you attach a brush cutter blade?
6:0721:39How to install a brush blade on any Stihl, Husqvarna, Echo ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo whenever you put your blade on you know that the the cutting teeth need to go facing the area theMoreSo whenever you put your blade on you know that the the cutting teeth need to go facing the area the way that it's turning. So it's going to turn this way and that's the way the teeth.
How do you change a Stihl brush head cutter?
0:512:24Stihl Line Trimmer- How to Quickly Exchange the Head in 20 seconds.YouTubeStart of suggested clipEnd of suggested clipAnd just start spinning that counterclockwise right there I felt the nail push down and lock like I'MoreAnd just start spinning that counterclockwise right there I felt the nail push down and lock like I'll show you again they're locked and now just spin this counterclockwise.
How do you install a Stihl metal blade?
8:4719:45How to Install Stihl Weed Eater Metal Blade Kit & RAW DEMO ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what we're going to do here is just take off our regular line cutting head now how we're going toMoreSo what we're going to do here is just take off our regular line cutting head now how we're going to do that is we're going to take this little round bar we're going to put it down in the hole.
How do you put the blade on a Stihl FS 90?
5:0910:19Stihl FS 90 Trimmer,Installing a Blade and String Talk. - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo with humped up parts up you'll put that down on here. And then what you're going to want to useMoreSo with humped up parts up you'll put that down on here. And then what you're going to want to use next is this little bump guard. You put that on now remember that this is left-handed thread.
How do you load a Stihl trimmer head?
5:476:29How to wind a Stihl trimmer head - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst make sure that the arrows and the spool housing. And the spool are aligned then firmly insertMoreFirst make sure that the arrows and the spool housing. And the spool are aligned then firmly insert the end of the line into the outlet hole as far as you can approximately two inches repeat.
How do you change the blade on a Stihl weedeater?
1:594:34Brush blade installation on a stihl weedeater - YouTubeYouTubeStart of suggested clipEnd of suggested clipLooking from the bottom you'll be turning this head clockwise to loosen. It like i said it's aMoreLooking from the bottom you'll be turning this head clockwise to loosen. It like i said it's a reverse thread.
How do you use brush cutter attachment?
Cutting Small Trees and Saplings Hold your brush cutter with the blade 2-8” above the ground. Start the cutter and bring the left side of the blade against the right side of the tree. Let the left side of the limit stop deflector rest against the tree to help hold the brush cutter in place.
How do you put the blade on a Stihl FS 56?
1:076:32Transform Your Trimmer with the STIHL Blade Installation KitYouTubeStart of suggested clipEnd of suggested clipPosition hold it in place. And finish tightening it. Up. Okay so there's your barrier bar theMorePosition hold it in place. And finish tightening it. Up. Okay so there's your barrier bar the purpose of the barrier bar is if I'm running a blade and I hit something.
Can you put a brush cutter blade on a curved shaft trimmer?
No, curved shaft trimmers are not designed to use any type of metal brush blade.
How do you change the head on a Stihl FS 90?
1:4811:31How to change trimmer heads on the fs90r - YouTubeYouTubeStart of suggested clipEnd of suggested clipIn the in the head thing here that slips.MoreIn the in the head thing here that slips.
Can I put a brush cutter blade on a strimmer?
While the exact procedure for converting the tool from a string trimmer to a brush cutter may depend on the model, it usually involves taking off the string head, replacing the deflector and attaching the blade. The process is similar to changing a string trimmer head as described by Lawn Care Life on YouTube.
Can you put a brush blade on a Stihl FS 56 RC?
0:216:04Stihl FS 56 RC Weed Eater Trimmer With BLADE ATTACHMENT in ...YouTubeStart of suggested clipEnd of suggested clipIt. Just doesn't hold up very well I like it using the string trimmers around some trees. And stuffMoreIt. Just doesn't hold up very well I like it using the string trimmers around some trees. And stuff like that.
How do you remove a Stihl PolyCut head?
0:301:55How To Replace The Plastic Blades on a PolyCut 7-3 Mowing HeadYouTubeStart of suggested clipEnd of suggested clipPlace the black part on top to hold everything in place. There is a hexagonal recess here for theMorePlace the black part on top to hold everything in place. There is a hexagonal recess here for the nut on the end of the drive shaft. So that just needs to be placed on.
How do you change the head on a Stihl FSA 56?
0:001:31Replacing AutoCut® 2-2 Trimmer Line on FSA 56 - YouTubeYouTubeStart of suggested clipEnd of suggested clipClean the mowing head of any grass dirt or debris. Then with your new autocad. - - - pre-round spoolMoreClean the mowing head of any grass dirt or debris. Then with your new autocad. - - - pre-round spool feed the lines through the two eyelets on the mowing head and push the spool into the head.
How do you change the head on a Stihl FSA 57?
0:151:06How To Change The Mowing Head On An FSA 57 Grass TrimmerYouTubeStart of suggested clipEnd of suggested clipNext take the poly cut mowing head and screw it on tightly. You can switch between both heads at anyMoreNext take the poly cut mowing head and screw it on tightly. You can switch between both heads at any point that you wish to switch. Them.
How do I change the string on my head trimmer?
0:163:58How to Replace a String Trimmer Head - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut once you put down in the hole you have to turn the head. Until it locks in place okay. RightMoreBut once you put down in the hole you have to turn the head. Until it locks in place okay. Right there it just locked. So now the other thing is most time they're threaded opposite.
What to use if you don't have a stop pin on a Stihl trimmer?
If you don’t have the stop pin that came with your Stihl trimmer, then use an Allen wrench of the appropriate size. When you purchase the cutting blade for your trimmer, also purchase the thrust washer, rider plate and nut to install it. Follow all safety warnings in the trimmer’s operator’s manual.
How to secure blades on a sandblaster?
Secure the blade in place by screwing a nut onto the shaft. Use a socket wrench to tighten the nut firmly . If the shaft spins so you can’t tighten the nut, block the shaft by inserting a stop pin, which came with your trimmer, into the the hole on the underside of the gear head. Spin the cutting blade slowly until you can push ...
How to remove trimmer line from skirt?
Remove the trimmer line cutting blade from the skirt by unscrewing the screw and sliding the blade out of the guide slot. You won’t need the trimmer line cutting blade while using a cutting blade. Store it in a place where you can find it later.
What to wear when handling a cutting blade?
Wear heavy-duty gloves when handling the cutting blade to avoid injury. The mounting nut must be secure to prevent the cutting blade from flying off and causing injury to yourself or your surroundings. Writer Bio.
What to do if weeds grow tall in yard?
By Diana K. Williams. If the weeds in your back yard have grown tall, then a trimmer with a cutting blade can make clearing the area easier and without the headache of a trimmer's line or string getting tangled in the thick vegetation.
