How do you install a coil spring lift kit?
- Loosen the wheel's lug nuts while vehicle is still on ground.
- Raise vehicle with either a large floor jack or frame lift.
- Place jack-stands under the frame to support it and lower vehicle onto them onto them.
- Place jack under the axle and raise it until it's bearing some weight.
- Remove tire.
How do you install a coil spring spacer?
Ensure all fasteners are tightened to OEM spec or the specs provided in the installation instructions for your kit. Place the coil spring spacer in the spring seat over the bump stop. Keeping the spring compressor on your spring, replace the spring in its original place, attaching the spring retaining clip.
How do you attach a coil spring to a bump stop?
Place the coil spring spacer in the spring seat over the bump stop. Keeping the spring compressor on your spring, replace the spring in its original place, attaching the spring retaining clip. Jack your wheel back up to the height it was when you first compressed the spring.
Should I consult the manufacturer’s instructions before installing my suspension lift?
Before beginning installation, be sure you consult the instructions included in your suspension lift kit from the manufacturer. Our instructions are meant to be a rough guide, not replace the manufacturer’s recommendations.
What should I do after my lift kit is installed?
Once your lift kit is installed, take things slow on your first test drive, listening for noises or rubbing, and making sure your vehicle handles properly. After 50 miles of drive time on your upgraded suspension, check all fasteners and ensure that they are still tightened to manufacturer specs. Enjoy your lifted truck or SUV!
How do you install a coil spring lift?
0:407:26How To Install Coil Spring Spacers - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you're going to have to find a way to separate the coil springs from each other so that you canMoreSo you're going to have to find a way to separate the coil springs from each other so that you can slide the block. In you'll notice that the block has two different height settings.
Where do coil spring spacers go?
3 days agoSpring spacers are discs that sit on top of your springs in a coil-equipped vehicle. Whether a solid-axle coil-sprung 4X4 or an IFS rig with coil-over-strut set-ups, they work under the same principle. As the name suggests, they space your spring down a set amount from the spring seat.
Are coil spring lifts good?
1:435:14Spacer Lift or Coil Spring Lift? EXPLAINED | Northridge4x4YouTubeStart of suggested clipEnd of suggested clipYou're always going to get better performance why. Well first off the spring is taller. It's goingMoreYou're always going to get better performance why. Well first off the spring is taller. It's going to compress. And extend. More. So you're going to get better performance there.
How do you install a spacer lift?
0:336:58Spring Spacer Install | Level or Lift your Jeep - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt up take the wheel and tire off and through there jack stands on the frame. Now that we got theMoreIt up take the wheel and tire off and through there jack stands on the frame. Now that we got the tire off the Jeep is the frame is resting on jack stand and the actual is supported by the jack.
Is a spacer lift bad?
Spacer lifts aren't bad if you install them correctly, and as long as the spacers don't lift the truck too high. Issues arise if the spacers are too high, causing issues with suspension. Mild spacer liftsare great for off-road and can even improve the off-road ability.
Can you lift a truck with just coil springs?
Coil-spring spacers fit between the spring retaining can and the spring. They're cheap, but your truck will still ride smooth. There is one disadvantage to coil-spring spacers. More than likely, you can only achieve an inch to an inch and a half of lift safely using this method.
Are coilover lift kits worth it?
Overall coilovers are performance-oriented which usually translates into more dollars, so if you're serious about performance, then coilovers are likely the best fit for your vehicle.
How do you install coil spring twist boosters?
1:574:21How to raise your car an inch for $9! (Coil Boosters/Spacers) - YouTubeYouTubeStart of suggested clipEnd of suggested clipThey basically screw on so maybe with like a with an impact gun uh you basically just screw them onMoreThey basically screw on so maybe with like a with an impact gun uh you basically just screw them on in between uh the coils in the rear.
Do coil spring spacers lift?
A coil spacer, or budget boost lift as they are often called, uses either a steel or polyurethane spacer to raise the vehicle. These typically sit on top of the vehicle's existing coil spring and generally go up to 2.5 inches in height. The big draw to these kits is that they are extremely low cost.
How do you install coil spring twist boosters?
1:574:21How to raise your car an inch for $9! (Coil Boosters/Spacers) - YouTubeYouTubeStart of suggested clipEnd of suggested clipThey basically screw on so maybe with like a with an impact gun uh you basically just screw them onMoreThey basically screw on so maybe with like a with an impact gun uh you basically just screw them on in between uh the coils in the rear.
Do coil spring stabilizers work?
Coil Spring are prone to rubbing, and proper alignment is impossible if the coil spring aren't operating at the original design height. A coil spring stabilizer ensures your coil spring stays at their original design height....Regular Stabilizers.Part NumberDiameterSPC-249002 inSPC-249502-1/2 in8 more rows
Does a spacer lift increase ground clearance?
Install Coil Spring Spacers When installed, coil spring spacers reduce the expansion and contraction of the coils in a vehicle's suspension system. As a result, the assisters can increase the ground clearance of a vehicle by around 10-15 mm.
How do you put a spacer lift on a Jeep Wrangler?
0:035:04TeraFlex Install: JLU 1.5" Spacer Lift - YouTubeYouTubeStart of suggested clipEnd of suggested clipRemove the bolt connecting the front track bar to the axle. Detach the bracket connecting the brakeMoreRemove the bolt connecting the front track bar to the axle. Detach the bracket connecting the brake lines to the front lower control arms. Remove the axle actuator plug by pushing in the locking.
How to replace a spring in a spring?
Keeping the spring compressor on your spring, replace the spring in its original place, attaching the spring retaining clip. Jack your wheel back up to the height it was when you first compressed the spring. Once secure, remove the spring compressors.
What tools do I need to install a suspension leveling kit?
Some helpful tools you want to keep handy are: Floor jack and jack stands rated for the correct weight to support your make and model. Torque Wrench. Wrenches ( various sizes)
How to remove ball joint from strut?
Support the lower control arm with a jack and use a pry bar on the upper control arm to remove the ball joint fully, pushing the knuckle out of the way to get to the strut. Unfasten the top three fasteners on the strut. Carefully lower the jack that is supporting the lower control arm.
How to separate knuckle from upper ball joint?
The knuckle may need to be separated from the upper ball joint. Keeping the ball joint loose, knock the tie rod end out of place. You may want to use a mallet to get it out of the knuckle. Strike the knuckle where the tie rod end and ball joints pass through.
Do you have to replace parts in a leveling kit?
The great thing about leveling kits is that you typically don’t have to replace numerous parts to install them.
Why use coil spring spacers?
Though most people who purchase coil springs spacers have probably already installed some sort of lift kit, many use spring spacers as a fine tuning tool to augment the kit's stock ride height. This gives even those who buy fixed height kits to adjust for the proper amount of clearance without having to purchase new springs.
How to loosen lug nuts on a car?
Step 1. Loosen the wheel's lug nuts while vehicle is still on ground. If using a floor jack, only loosen one wheel at a time. Loosening the lug nuts on all wheels can cause damage to the studs on the opposing side when the vehicle tilts away from the jack.
Do you have to unbolt coil springs?
You may have to unbolt the coil spring retainers from one or both sides of the coil spring before compression, depending on the make and model.
How long does it take to test drive a lift kit?
After 50 miles of drive time on your upgraded suspension, check all fasteners and ensure that they are still tightened to manufacturer specs.
How to contact TruckSpring suspension?
If you have questions before, during or after installation of a lift kit purchased from TruckSpring.com, our suspension experts are available at 1-800-358-4751 from 7am to 11pm EST. After installation, to make sure everything went smoothly, we recommend taking your vehicle to be checked by a suspension professional who can ensure ...
What is the best way to knock out fishing fasteners?
A hammer will help knock them out. Extra nuts and bolts – You never know when you might need them. Safety wire or other rigid wire – Incredibly useful for fishing fasteners into places you can’t reach, or to tie components out of the way during the install process.
How to prevent electric shock?
To prevent electric shock, unclamp the negative battery terminal. (This is a general best practice any time you’re doing work of this type.) Loosen but do not remove lug nuts. Jack the front of the vehicle to a height that’s adequate for you to get underneath your vehicle and install your new components.
Do you need a spring compressor for a front coil spring?
Spring Compressor – If your vehicle has a front coil spring suspension with either struts or separate coil springs, a spring compressor will likely be needed during removal and installation of new components.
