Receiving Helpdesk

how do you install a bulldog security remote starter

by Leola Brekke II Published 3 years ago Updated 2 years ago

Basic Steps of Remote Start Installation:

  • Remove the lower dash under the steering wheel.
  • The remote starter needs to be connected to multiple wires.
  • Test each wire relevant to the installation.
  • Attach the ground wire to the chassis of the vehicle.
  • Attach it to the starter to start the circuit.

Part of a video titled Remote Starter Installation Video By Bulldog Security - YouTube
12:40
14:37
Find a good spot under the hood where you will be able to mount the hood pin switch. And be able toMoreFind a good spot under the hood where you will be able to mount the hood pin switch. And be able to connect the black and blue hood pin switch wire to the underside of the switch.

Full Answer

How do I install a remote starter?

2 Part 2 of 2: Wiring the Remote StarterRemove the panel covering under the steering wheel. ... Connect all your wires properly. ... Connect the ground wire. ... Locate the 12V constant wire on the vehicle and attach the power wire of your system to it. ... Find and attach the accessory wire. ... Locate and connect the ignition wire.More items...

How hard is it to install remote start?

Remote starters are convenient, inexpensive and easy to install. Learn about remote start installation here. Install a remote starter for your car yourself. It's a great upgrade, inexpensive and a project you can do yourself with simple tools and the supplied wiring diagram.

Is Bulldog Security still in business?

Went out of business. The management could not come to a consensus on which direction the company should go, and because of this the owners closed the doors of the company and went their separate ways.

What is the easiest remote start to install?

The easy-to-install, all-in-one Compustar 1-Way Remote Start and Keyless Entry is our best overall aftermarket remote start system. Our best value pick is the basic but functional Avital Avistart Remote Start System.

Can I install a remote starter myself?

Unless you are a certified 12-volt automotive electrician, you should not attempt to install a remote starter on your own. You can risk hurting yourself, your vehicle, and your wallet in case repairs to either are necessary.

How long does it take to put in a remote car starter?

According to our expert installers, a remote starter installation takes an average of 3 hours.

How do you program a bulldog remote?

2:364:19Bulldog Remote Transmitter Programming - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd press any button on the new remote the parking lights will flash three times and the newMoreAnd press any button on the new remote the parking lights will flash three times and the new secondary remote will be learned and you would repeat that if you had a third or a fourth transmitter.

What is a Bulldog Security?

Bulldog Security offers a variety of auto alarm systems, ranging from motorcycle alarms to DIY car alarm systems. We are a trusted and recognized name in auto security – our products are carried nationally at outlets like AutoZone and O'Reilly Auto Parts.

What is the difference between a 1 way and 2 way remote car starter?

When you press a button the remote starter will execute the command and the vehicle will respond with parking light flashes. A 2-way system does the same but it also sends a signal back to the remote to notify you that the command has been executed.

Does remote start drain your battery?

Yes, this convenience has its drawbacks: it's been shown that when you use a remote starter, your battery will drain more quickly than if you had started the engine manually by turning the key in the ignition. But for many people–especially those with busy schedules–the benefits outweigh any inconvenience.

How much does it cost to add remote start to a vehicle?

Cost of a Remote-Start System Aftermarket remote-start systems typically cost $200 to $330, including parts and labor, but systems for European cars with transponder keys can run as much as $800 because of their more complicated electronics.

How much does it cost to put remote start in your car?

Cost of a Remote-Start System Aftermarket remote-start systems typically cost $200 to $330, including parts and labor, but systems for European cars with transponder keys can run as much as $800 because of their more complicated electronics.

Does remote start damage your car?

There is a myth that remote starters can damage your vehicle. The truth of this is, a properly installed, high quality system will not cause any damage. Incidents where cars have quit running or even caught fire are typically due to being installed improperly, although extremely cheap systems are also unreliable.

Is a remote starter worth it?

The consensus among mechanics is that remote starters are good for your engine, especially for people with turbos or diesel engines. Remote starters are good for your engine because they warm up the engine before driving. In cold weather, the oil inside your car thickens.

Does remote start add value to car?

In any event that you decide to sell your car, a remote start system can increase its value, because many people know the convenience and comfort that a remote starter system can provide.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9