How do you install a ball catch latch?
- Locate the spot where the ball catch will be installed on the top of the door.
- Measure the width and height of the barrel of the ball catch.
- Drill a hole centered on the location mark.
- Drop the ball catch in the hole and fasten the face plate to the top of the door with the provided screws.
How do you install a ball catch on a door?
Installing the ball catch correctly ensures the door holding the catch remains fixed in the door frame when not in use. A ball catch uses friction to hold a door in place without the need for a door handle or a complicated door catch. Open the door. Place the end of a tape measure on the floor.
What is the purpose of a ball catch latch?
The ball catch latch provides a more optimal location for a door latch that avoids the typical door latch location. By moving the latch mechanism to the top of the door, you can secure the door in a less obvious way. A ball catch latch is a simple, but strong way to close a door.
What is a ball catch on a closet door?
Door catch (such as handles or knobs) A ball catch is generally used on linen closet doors where a latch is not used or needed, but it can also be used on kitchen cabinet doors or where two double doors meet without a center door jamb.
How do you attach a latch plate to a door jamb?
Align the bottom of the latch plate with your bottom pencil mark, with the plate sitting on the inside of the door jamb. Center the latch plate on the face of the jamb. Trace the outside of the latch plate with the pencil. Mark the top and bottom of the ball catch plate on the door jamb with the pencil.
How do you install a ball door catch?
0:121:17How To Replace the Ball Catch on an Interior Door - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe door from the frame. And set it on sawhorses if necessary then using a putty knife pry the oldMoreThe door from the frame. And set it on sawhorses if necessary then using a putty knife pry the old ball catch from the door. Next press the new ball catch into the hole until it's flush.
How do you fix a ball catch latch?
2:167:54How to Fix a French Door Ball Clasp - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo if you take your pliers or your needlenose pliers. And you stick them in those notches. You canMoreSo if you take your pliers or your needlenose pliers. And you stick them in those notches. You can just retighten that thing you want the cylinder to be beneath. The edge there so it's not visible.
How does a ball tension catch work?
Ball Catches - Tension Ball Catches Each catch is supplied as a two-piece set with the catch portion having adjustable tension balls that secure the mating piece. Each catch portion is supplied with a square hole in the center to accept either a front or side mounting from the mating piece.
How do you set up a double ball catch?
3:175:47#37 - Installing Double-Bullet Catches - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe part that goes onto the door and of course you can see exactly where this is going you can thenMoreThe part that goes onto the door and of course you can see exactly where this is going you can then take the door close it push on it a little bit hard and then pull it out gently.
How do you put a ball back on a ball catch?
1:434:18How to Replace a French Door Ball Clasp - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe're gonna pull that out and there's a big ol hole in the door right here with this insert I'mMoreWe're gonna pull that out and there's a big ol hole in the door right here with this insert I'm gonna leave the insert in there. But anyway so we're ready to put the new piece in.
What is a ball catch on a door?
Ball catches are small pieces of door hardware inserted into the top of an interior closet or pantry-type door. They're ideal for doors without a standard door knob with a latching system and strike plate, and are mostly used in double-closet doors with dummy door knobs.
How do you install a single roller catch?
2:1310:48Amerock AMBP9745 2G Large Metal, Single Roller Catch Bright Zinc ...YouTubeStart of suggested clipEnd of suggested clipOnce you have those holes pre-drilled install the hardware but leave the screws. Maybe just slightlyMoreOnce you have those holes pre-drilled install the hardware but leave the screws. Maybe just slightly loose loose enough so that you can back them out and then easily.
How do you adjust a ball hinge?
To adjust the ball catch on a door, tighten or loosen it by turning it. Turn the ball catch clockwise if it needs to be adjusted to a lower height and counterclockwise to adjust it to a higher height.
How do you tighten a spring latch?
0:343:11How to change the backset of an entry latch - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's as simple as pulling it straight back or pushing forward keeping the squared cut out squaredMoreIt's as simple as pulling it straight back or pushing forward keeping the squared cut out squared with the rest of the latch.
How does a double ball latch work?
A double ball catch has two balls in a casing which hold the striker inplace when it is inserted between them. The balls can often be adjusted (by a screw behind each) to increase the pressure applied to the sticker plate.
How do you install drawer catches?
2:306:01RV Cabinet and Drawer Latches Install [ How-to Install ] - YouTubeYouTubeStart of suggested clipEnd of suggested clipTowards the top of the door. And we're going to visually make sure that it lines up with that catchMoreTowards the top of the door. And we're going to visually make sure that it lines up with that catch and install one screw only that way in case we need to move it up or down.
How does a roller latch work?
Roller latches come in a variety of configurations some perform a simple closing function and Imperial Lock makes a series that also will lock a door. Whatever the configuration they share a simple roller that is a metal ball which projects into a recessed hole in the strike when the ball is sprung.
How to clean a ball catch?
Add a little bit of a light oil on the ball catch, and wipe off the excess. This is all that is needed in order to achieve smooth operation and years of trouble-free service.
What do you need for a door catch?
Door catch (such as handles or knobs) What You'll Need. Ball catch hardware. Electric drill. Carbon trace paper. Lubricant. Door catch (such as handles or knobs) A ball catch is generally used on linen closet doors where a latch is not used or needed, but it can also be used on kitchen cabinet doors or where two double doors meet without ...
Where to mount strike plate on door?
Mount a strike plate on the door jamb that is opposite to where the spring loaded ball catch location is . This holds the door closed. A pull on the door will release the catch. When installing the strike plate, be aware of the following two issues: Lining up the striker and ball catch properly.
How to line up a striker cup?
Addressing the task of lining them up is a bit harder. Use some carbon trace paper with the shiny carbon side facing against the opposite surface where the ball catch is located. Hold the paper in this area and close the door. The ball catch will roll over the paper when you close the door and make a line on the surface. Where the line stops or ends is the middle location for the striker cup. Mount the striker according to this line.
