What is the proper etiquette for hanging a flag?
Hang a solitary flag on a porch post for a simple and classic look for any house. Over the front door is a great alternative. When displaying more than one flag, the U.S. flag should be flown to the observer's left, as shown. This display is perfect with the beautiful symmetry of this home's architecture.
Is hanging a flag a duty or a responsibility?
Flag hangers defy SCE warning: Lucerne Valley resident views highway flag-hanging duties as act of patriotism . Peter Day Staff Writer @peterdaynews Friday Sep 9, ...
How to hang a flag horizontally on a wall?
- Remove any display sticks that were added to the flag as a way to make them wave. ...
- You can avoid poking holes in rigid flags by using thumbtacks and hooks as supports, rather than pushing them through the material. ...
- If the flag in question is an antique, framing it is the best course of action. ...
How do you hang a flag on Your House?
Things You'll Need
- Flag on a pole
- Bracket to fit flag pole
- Screws
How do you put a flag on without grommets?
A rope/ribbon is sewn on the top and bottom of the sleeve so you can fasten the sleeve to the pole and tighten it in place to prevent slippage. However, additional support is suggested such as a stopper, clamp, rubber ring, zip-tie, or even glue to hold the flag in place.
How do you hang a flag without eyelets?
If your flag pole doesn't come with hooks or a rope, you can always thread zip ties through your flag's grommets and around the pole to hold the flag in place. We recommend using snap hooks like the one seen to the left in most flag hanging scenarios involving grommets.11-Apr-2016
How do you stick a flag to the wall?
In the case of a wall displaying the American flag, it must be hung with the Union (stars) at the top or highest point. It can be hung either vertically or horizontally, but the stars can never be displayed on the bottom of the Stars and Stripes, no matter the case.
How do you hang a flag on a pole without grommets?
Basically, all you need to do is:pinch together the flagpole rope.push the loop through the eyelet of the flagpole clip.pull the halyard loop over the clip end of the flagpole clip.pull the halyard tight so that the clip sits snugly in place.
How do you hang a flag without a pole outside?
Specific etiquette applies to displaying the U.S. flag with respect....How to Display an American Flag Without a PoleHang the flag vertically over a street with the stars, or union, to the north or east, and toward the top.Hang the flag vertically over a sidewalk, with the stars farthest away from the nearest building.More items...
How do you hang a flag on a pole without rope?
More videos on YouTubeUnscrew plastic screw from EZ-Mount ring.Slide ring onto flagpole.Thread plastic screw through the flag's grommets and screw back into EZ-Mount ring.
How do you hang a flag on a wall without command strips?
A quick, simple method would be to attach some velcro to the backside of your flag with a fabric adhesive or a hot glue gun. Then attach the opposite or receiving portion of the velcro to the wall with anything that won't damage the wall. You can find suitable products in any teacher's supply store.
Is it disrespectful to hang a flag on a wall?
Don't hang your flag backwards, upside down, or in another inappropriate fashion. If you're hanging your flag vertically (like from a window or against a wall), the Union portion with the stars should go on the observer's left. Never dip the flag to any person or anything.01-Jul-2021
How do you hang a flag with command strips?
First, grab your tapestry and decide which way you want to hang it....Option 1: 3M Command StripsStep 1: Attach 3M Command Strip to wall and remove backing from velcro.Step 2: Press tapestry and hold for a few seconds. ... Step 3: Stick a second 3M Command Strip on the opposite side of the tapestry.
How do you hang an outdoor flag?
Hang flag vertically with the canton farthest from the building. The union, or star field, should always be at the top and should be on the flag's own right (the viewer's left). When being hung over a street, the union should ideally point north or east.
How do you hang a flag on brick without drilling?
The best way to attach wood to brick without drilling is to use a brick wall hook. These hooks are designed for brick walls, even slightly curved ones. They are removable, adhesive-free, and strong (holds up to 25 lbs). You can install them in seconds and most importantly: no holes to drill.
How do you hang a flag on a concrete wall?
0:235:12Concrete flag mounting guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you'll also want some concrete drilling bits and I will show you the tools I use for that in hereMoreIf you'll also want some concrete drilling bits and I will show you the tools I use for that in here in just a little bit but this is it mounted straight into the concrete on the front of the house.
How to keep flags from poking holes?
You can avoid poking holes in rigid flags by using thumbtacks and hooks as supports, rather than pushing them through the material. It can take a little technique to do this, but you can get the hang of it fairly quickly.
What are the rules for hanging a flag?
Believe it or not, there is a codified set of rules that you are expected to follow when you’re hanging up a US flag. In some situations, such as military members, disrespecting them can result in penalties. Here’s what you need to know about hanging up a US flag: 1 The Union (blue rectangle side with the stars) should always be hung up on the right side, to the viewer’s left. 2 The flag should always be the highest flag in the room, above all other states, towns, and county flags. If you have other countries’ flags on the wall, make sure they are at an even height when compared to the US flag. This is the expected status quo while we’re in peacetime. 3 If the flag touches the ground, it’s considered to be part of decorum to destroy it in a dignified manner. 4 You can hang Old Glory vertically or horizontally, but not on an angle. 5 Clipping the flag and then hanging it is the best indoor protocol if your flag doesn’t have grommets. If you have an antique flag, framing it is also acceptable. 6 Let the bottom of Old Glory hang freely. You should avoid stretching out the flag. 7 Always use a clean, well-kept flag.
Why should we hang our flag upside down?
The traditional take on hanging a flag upside-down is that it should never happen unless a national tragedy occurred or if the is a need to signal grave danger. For example, it would make sense to hang a flag upside-down if the president was assassinated or if a bombing occurred in your city.
How to get rid of a flag that has fallen to the ground?
The most common way to get rid of a flag that has fallen to the ground is to fold it, burn it, and salute it as it burns. However, the more important aspect to keep in mind is that any form you deem dignified (i.e., not dumping it in the trash) is alright.
How to hang felt pennants?
Felt pennants are supposed to be hung up by the tiny white ties on their ends. If the pennant in question already comes with a string for hanging it, just use a hook to make sure it’s properly displayed.
Can you hang a flag indoors?
Clipping the flag and then hanging it is the best indoor protocol if your flag doesn’t have grommets. If you have an antique flag, framing it is also acceptable. Let the bottom of Old Glory hang freely. You should avoid stretching out the flag. Always use a clean, well-kept flag.
Is it illegal to hang a flag upside down?
There was a case in Pennsylvania where a man was arrested for hanging the flag upside-down since the state has a law against disrespecting the state and national flags. Nationally, there is no law making it illegal to fly a flag upside-down , though it’s heavily frowned upon.
How to attach a flag to a wall?
A quick, simple method would be to attach some velcro to the backside of your flag with a fabric adhesive or a hot glue gun. Then attach the opposite or receiving portion of the velcro to the wall with anything that won't damage the wall. You can find suitable products in any teacher's supply store.
How to hang cloths on a wall without holes?
To hang a cloth on a wall without putting holes in it, just use hot glue. When you need to remove it, use a steam iron. It won't hurt a thing if you take a little care.
How to make a flag with 5 feet?
If your flag is 5 feet long, go to a hardware store and buy a flat piece of steel 5 feet long, about 1 to 2 inches wide, and 1/16th to 1/8 inch thick. Spray paint this strip the same color as your wall. Mount this painted steel strip to your wall with four screws, equally spaced horizontally.
What is flag code?
The flag code is an official document.
Can you use command strips on a flag?
If the flag has grommets for attaching to a pole you can use command strips like this. If it doesn’t have grommets you can attach to the command strip with one of these: Or if it has a pocket sewed in (similar to a curtain) you can use a dowel or curtain rod through the pocket and hang the dowel on the command strips.
Where is the header on a flag?
A well-made flag has a “header,” a cloth strip to the left of the actual flag, with eyelets where clips or ropes can be attached. Cheaper flags, such as desk flags and hand-held parade flags, often do not have this, and are sometimes stapled or glued to a stick or pole.
Which side of the flag should the canton be on?
For flags of countries that read left-to-right - including USA - the canton should be on the left when looking at the flag.
How to hang a flag vertically?
Check the side of the flag with the union for grommets, or the metal loops at the corners used to fly the flag from a pole. Use push pins or nails to hang the flag vertically from the grommets. Don’t pierce the flag itself with nails. They would damage and disrespect the flag.
How to hang the American flag on a wall?
Hanging an American flag on a wall properly involves some attention to detail. Whether you display the flag horizontally or vertically, make sure the union, or the field of blue with stars, is on top and to your left. If you are displaying other flags, always put them to the American flag's right (from the perspective of facing the flag).
How to make sure the American flag doesn't fall?
Make sure the flag won’t fall. Hang the flag securely so it won’t fall to the ground. If an American flag touches the ground, it should be retired, preferably by burning.
What side should the flag be on?
Whether you hang the flag vertically or horizontally, the union, or field of blue with white stars, should be at the top left side. The flag’s own right, or the observer’s left, is considered the position of prominence. A flag displayed with the union on the bottom is a sign of distress.
What does the union on the bottom of the flag mean?
A flag displayed with the union on the bottom is a sign of distress.
Where should the American flag be displayed?
Position state or city flags to the American flag's right. Hang the American flag so it is to the left (as the observer, facing the flag) of any other flag. Since the flag’s own right (or the observer’s left) is the position of prominence, any state, city, or other organization’s flag should be displayed to the observer’s right.
How to display a flag?
If you’re hanging it on an outdoor wall, take it down at sunrise or use an outdoor light to keep it illuminated overnight. If you don't want to keep a room's overhead light on, you can set up a spotlight to illuminate the flag.
How should the flag be raised and lowered?
It should be raised at a fast and brisk pace. When lowering the flag, it should be slow and methodical. The United States flag should be saluted while it’s being raised and lowered. The salute should be held until the flag is unsnapped from the halyard (the rope, lanyard, wire-center halyard, or stainless steel cable).
Where should the union be on the flag?
If you feel inclined to display your flag on a flat surface like a wall or window, it’s important to have the union be at the top left.
How to tell if a flag is aging?
Signs or flag distress include; fade in color, tattered edges, stains, and holes. If your flag displays aging symptoms, it may be time to replace it with a new one. Now, disposing of an American flag is a whole other story. You never just want to toss an American flag into a trash can or dumpster.
How do you know when it's time to replace the American flag?
You know when it’s time to replace your American flag when it is very worn and tattered. If you feel that your flag is too worn to adequately represent what it stands for, then it’s time to replace the flag . Signs or flag distress include; fade in color, tattered edges, stains, and holes. If your flag displays aging symptoms, ...
Why is the American flag upside down?
The American flag should never be flown upside down in a normal setting. The act of flying the flag upside down signals distress and a need for help. It is not to be taken lightly, and it is only to be displayed in life or death situations. It represents extreme danger.
What does the flag mean in the Star Spangled Banner?
O say does that star-spangled banner yet wave. O'er the land of the free and the home of the brave.”. The flag stands for a prevailing country and its people. It represents unity in something greater than ourselves. It stands for strength and freedom. That is why it is paramount to fly an American flag with respect and integrity.
Why is the American flag important?
For starters, the American flag is an important symbol for our country. It represents the unification of America. If you listen to the National Anthem lyrics, you can understand how important the flag is to our country and the people it represents.
Where should the flag be placed when hanging a flag?
When hanging your flag indoors, ensure that the flag is in a prominent position. It should be placed to the right of the speaker or service leader.
Where should the flag be displayed when it is raised?
The flag must be carefully positioned when being displayed inside: Keep in mind the phrase, “the flag’s own right.” For example, if the American flag is raised next to a state flag, it must appear to the left of the other to the view of an observer. This also applies to public addresses as well.
Why do American flags have grommets?
These are tiny holes internally bordered with a golden frame. Grommets are meant to allow people to easily hoist their flags onto the display while avoiding putting holes into the fabrics of flags. They also allow the flag to be raised onto a flag pole.
What does the red and white stripes on the American flag represent?
Its red and white stripes mixed with stars on a blue canton represent democracy and freedom that Americans obtained via their own revolution.
What is the difference between lowering and raising the flag?
Flags are supposed to be hoisted at a rather brisk pace, whereas the lowering ceremony is encouraged to be more drawn out. The flag is only supposed to be raised by the flagpole at certain times of the day, barring rare circumstances.
Why do we have stars and stripes on our flag?
Many Americans also possess this Stars and Stripes banner to show their patriotic feelings towards “The Land of the Free.”
When hanging over a street, should the union of the flag face north?
When hanging over a street: the union of the flag should face north in an east/west street. On a north/south street, the union should face east.
Can you put a flagpole on the side of a house?
You could get super ambitious and opt for a full-size flagpole, but unless you’re comfortable with digging deep holes, pouring concrete foundations and installing anchors, it’s best to go with a simple bracket that attaches to the side of your house.
Can you drill a hole in vinyl siding?
This will work for wood or vinyl as well, but if you don’t have one, a regular drill bit will do. With vinyl, drill a hole slightly larger than what you need to allow for the siding expanding and contracting due to changes in temperature.
Can you install a screw in masonry?
Be sure to install the screws in the masonry, not the mortar. If you’re mounting the bracket on wood or vinyl siding, it’s best to use a surface mount block with a back that conforms to the siding profile to provide a level surface.
