how do you get rid of black mold with tea tree oil

1. Mix one teaspoon of tea tree oil per cup of water and transfer it to an easy to use spray bottle. ...
2. Spray the tea tree oil mixture generously onto the moldy area and let it sit overnight.
3. By the next morning, the mold should be dead. Take a rag and dip it into white distilled vinegar and scrub the mold away with it.

What are the dangers of tea tree oil?

Negative Effects of Tea Tree Oil

• Tea Tree Oil Uses. Tea tree oil, which is also called Melaleuca oil, is extracted from the Australian tea tree. ...
• Tea Tree Oil Side Effects. ...
• The Possibility of Hormonal Disruption. ...
• Sensitization to Tea Tree Oil. ...
• Dilute Tea Tree Oil Properly. ...
• Other Safety Precautions. ...

What are the health benefits of tea tree oil?

Tea Tree Oil Boosts Immunity. This essential oil is very effective in stimulating and strengthening the immune system to fight off infections. This is the reason why tea tree oil is used as an aromatherapy because it can act as a positive stimulant that promotes the internal well-being of the body. Tea Tree Oil Removes Toxins

What is the best treatment for black mold?

• Scrub mold off hard surfaces such as window sills and tile with detergent and water and dry completely with a rag.
• For more porous surfaces, like drywall, just use a rag so you don’t damage the surface with more abrasive cleaners. ...
• To speed up the job, try a mold cleaner specially formulated with mold killing ingredients.

More items...

Is tea tree oil the strongest antibacterial essential oil?

Tea tree oil, also known as melaleuca, is well-known for its powerful antiseptic properties and ability to treat wounds, which is why it’s one of the top antibacterial essential oils. Tea tree is a volatile essential oil derived mainly from the Australian native plant Melaleuca alternifolia.

Does tree tea oil kill black mold?

When tackling black mold, it's best to clean it with natural solutions such as vinegar, grape fruit, or tea tree oil. Tea Tree oil is one of the most effective ways to tackle black mold at its start.

Can I use tea tree oil to kill mold?

To kill mold using tea tree oil, add 1 teaspoon tea tree oil and 1 cup of water in a spray bottle. Spray the solution on the moldy surface. Do not rinse. Leaving the tea tree oil on the surface will kill the mold and prevent it from returning.

Can you mix vinegar and tea tree oil for mold?

USING TEA TREE OIL If you find mold in your house, there are a number of products you can use to get rid of it, including bleach, vinegar and hydrogen peroxide. However, tea tree oil is by far the most effective, natural option.

Can you use tea tree oil on walls?

It contains terpenoids, which are naturally occurring chemicals with antiseptic and anti-fungal properties, so you can use tea tree oil for mold on walls.

How long does it take tea tree oil to kill mold?

Mix 2 teaspoons of tea tree oil with two cups of water. Pour the solution into a spray bottle. Spray the solution directly onto the mould and leave it for an hour. If you don't have a spray bottle, just thoroughly dampen a disposable towel and apply to affected area.

What kills black mold instantly?

Treat the AreaFor a natural solution for getting rid of black mold, combine one part baking soda with five parts distilled white vinegar and five parts water in a spray bottle.Alternatively, you can use a chemical-based mold and mildew remover, all-purpose cleaners, bleach or dish soap.More items...

Which essential oil kills mold?

5 Essential Oils That Kill Mold: Tea Tree Oil. Eucalyptus Oil. Lavender Oil. Citrus Oil.

How do you clean your house with tea tree oil?

Combine a teaspoon of tea tree oil with one cup of water in a spray bottle. Shake the bottle to keep combined, and spot treat existing areas of mold. Leave for a few minutes and wipe away. To prevent mold and mildew, simply spray to apply where needed.

What essential oil is best for mold?

5 Essential Oils That Help Protect Against MoldCinnamon Oil. Cinnamon oil has been proven to be highly effective at protecting against mold growth. ... Thyme Oil. Thyme doesn't just belong in your spice rack! ... Clove Oil. ... Tea Tree Oil. ... An Essential Oil Blend.

What kills black mold on walls?

Use 1 part bleach to 3 parts water, according to Sherwin-Williams. If you don't want to use bleach but do want something other than water, try vinegar, borax or branded products that you can find at a hardware store or home center, which also kill mold.

How do you get rid of mold without scrubbing?

How Do You Use Vinegar to Clean Mold?Add full-strength white distilled vinegar to a spray bottle and spray it on the mold.Let it sit for at least an hour before wiping away mold.If you need follow-up scrubbing, combine one teaspoon baking soda with two cups of water.More items...•

What can you dilute tea tree oil with?

It's important to dilute the oil with a carrier oil, such as olive oil, coconut oil, or almond oil. For every 1 to 2 drops of tea tree oil, add 12 drops of a carrier oil.

What Is Tea Tree Oil?

Tea tree oil is distilled from the leaves of the tea tree, which is native to Australia's southeastern coast, where it grows in swampy areas. It has a strong, pine-like smell. Aboriginal people in Australia have long used tea tree oil as an antiseptic. Thanks to its ability to kill bacteria and fungi, some people use tea tree oil as a natural alternative treatment for acne, athlete's foot, nail fungus, dandruff and lice. It is also found in body care products like shampoos and lotions.

How to keep mold out of shower?

And if possible, increase the ventilation in the room with an open window or fan to slow mold reoccurrence. Spray this simple 2-ingredient cleaner every 2 to 3 days to keep your shower mold and mildew free.

What to wear when cleaning mold?

Cleaning Tips. If you already have mold, the EPA recommends wearing gloves, goggles and a breathing mask during cleaning to avoid contact with or breathing in mold spores. Advertisement.

Can mold be found in a house?

No one wants to find mold in their home, but according to the EPA, mold can be found almost anywhere. We think of mold being in the damp environment of the bathroom, but it can also grow on wood and carpet. If you find mold in your home, you don't have to turn to harsh chemicals that produce dangerous fumes and leave unsafe residues. You can naturally clean mold with with tea tree oil and distilled vinegar.

How to kill mold with tea tree oil?

The process is pretty straightforward. All you need to do is mix the oil in a spray bottle of water and then apply the solution to the moldy area. That’s all it takes. The amount of TTO will depend on the amount of water in the bottle.

How long does it take for TTO to kill mold?

As you can see, after 7 days of application, TTO could eradicate the tested mold species on a 44 mm area, while vinegar, Ethanol, and the two industrial disinfectants couldn’t exceed 20 mm.

How much TTO should I use for fungus?

Another study suggests that a concentration of 2.17 mg/ml of TTO is enough to have an inhibitory power against fungi. The same study proves that by increasing the concentration of TTO, we also increase the killing rate and the duration mold needs to take root again.

What is tea tree oil used for?

The ancient people of Australia (Australian Aborigines) have known about the benefits of tea tree oil for centuries and used it as a traditional herbal remedy and disinfectant against bacteria, wounds, pests, and many other skin and health problems.

Is TTO effective against mold?

With that in mind, please note that TTO is ineffective against certain species of mold .

Is tea tree oil safe for skin?

The above list is not medical advice. Although tea tree oil is generally safe, be sure to consult your doctor before using it to treat any type of health problem.

Is TTO good for mold?

So all these studies prove that TTO is rich in anti-fungal and antibacterial properties and therefore very effective against mold and fungi.

How to get rid of dead mold?

When you are done wiping or scrubbing the mold away with a brush, cloth or sponge, you need to thoroughly clean it immediately using boiling hot water or get rid of it to prevent mold from coming back. Dead mold spores can still cause health problems, so be mindful of this.

How to get rid of mold on a hard surface?

This is a great and inexpensive way to get rid of mold. It works well on hard surfaces and kills germs as well. Mix a teaspoon with a cup of water. You can use these measurements to make more if you need to. Spray it on or dip your cloth into it and wipe it onto the area so that it's completely covered and wet. Wait 10 minutes to make sure all the mold is dead.

What is the most toxic mold in a building?

One of the most common types of toxic mold in buildings is black mold also known as Stachybotrys chartarum. This mold releases toxins called mycotoxins which cause many severe symptoms. It is a black mold tinged with green and is usually slimy unless it's dry in which case it can look powdery. The symptoms caused by this type of mold are much more severe and can become life-threatening.

How to get rid of mold smell in house?

Vinegar can be used undiluted to clean away mold and kill the spores. Though the smell is strong, it will go away when it dries. Vinegar isn't irritating to small children so it's ideal and a very affordable solution. You can spray it directly onto the area or apply it with a rag. You can then rub or scrub it away.

How to get rid of mold on a drywall wall?

Dissolve some baking soda in water, you can either use a spray bottle and spray it onto the affected area or you can also dip a cloth into it and wipe it on. You can use a rag, a sponge or a brush to then wipe or scrub away the mold. It can also be used to finish off other methods like the ones listed below.

Why do doctors miss the symptoms of mold?

This is because they often can't see the cause of the symptoms.

Where do mold spores grow?

All they need to thrive is moisture and oxygen and can be very resilient. This makes your kitchen, bathroom and anywhere else where there is a leak or damp the ideal place for mold to grow. Some types of mold spores can even survive when dry which makes it easier for them to settle and grow indoors.

How to use tea tree oil for mold?

First things first – prevention is better than the cure! The best way to combat mold is to prevent it from growing in the first place . The best way to do this is to ensure fresh air is circulating and damp air can leave the room . The easiest thing to do is to remember to open a window before/after ...

How to make mold spray with tea tree oil?

Mix 2 teaspoons of tea tree oil with 2 cups of warm water, add it to the spray bottle and give it a good shake to mix. This is your basic homemade tea tree oil mold killing spray. To make the spray stronger, simply either add a little more essential oil or reduce the amount of water used.

How to stop mold from returning?

Once again, work the spray into all the little nooks and crannies, but don’t rinse, leave the tea tree oil solution in place. This last step will help to prevent the mold and mildew from returning for quite some time. Additionally, you can lightly spray the worst affected, stubborn areas every week or two to help stop the mold from returning.

How to clean mold from a drywall wall?

Depending on the amount of mold you are tackling, you will need: 1 Essential tea tree oil 2 Sponge or cloth 3 Toothbrush 4 Scrub brush 5 Spray bottle (any old empty spray cleaner bottle will work. Just be sure to rinse it out first. You also might want to relabel the bottle as tea tree oil spray cleaner)

How to kill mold naturally?

To kill the mold naturally, spray the solution on the affected areas and leave for an hour or so before attempting to scrub and remove the mold residue. Once an hour has passed, spray the affected area once more and immediately get to work scrubbing and removing the mold residue with the scrub brush & toothbrush.

What is the best oil to use for mold?

You can use several essential oils for mold and mildew removal. However, if you want to get rid of mold in the house naturally, tea tree essential oil is the best one for killing mold and mildew. Tea tree oil is well known for its anti-bacterial and anti-fungal properties, but it is mainly used for natural health and beauty purposes. However, tea tree oil kills and cleans off mold and mildew very effectively and it also prohibits their return for a good while afterwards.

Is it safe to use essential oils for mold removal?

Many folks will simply say – just use bleach… Well firstly bleach is nasty and you don’t really want to be splashing it around your walls and ceilings. Using essential oils for mold removal is safer and better for the environment. Tea tree oil is 100% natural and it’s actually much, much better at preventing mold from reappearing than bleach. Bleach removes mold, but it soon returns.