how do you fix the gap between stairs and walls

How do you fix the gap between stairs and walls?

• Run a bead of paintable silicone caulk in the gap.
• As an alternative to caulk, press wood putty into the gap with a flexible putty knife, pressing it in firmly and building it up slightly higher than the surface of ...
• Install carpeting on stairs to hide small gaps between the tread and stringer or riser.

Full Answer

How do you fix a gap in a concrete staircase?

Feb 23, 2020 · How do you fix the gap between stairs and walls? However, caulk alone will only work on a gap that is less than 1/4 inch wide. Vacuum the gap clean using a vacuum with a hose attachment, or use a broom and dustpan to clean it. Load a …

How do you fix a split in a wood staircase?

Step 1. Clean out the joints where the sides of the stairs meet the wall, using a piece of folded sandpaper to get the whole area free of loose plaster or dirt. Get the sandpaper well down into the joint. Blow away the dust as you sand.

How do you fix loose plaster on stairs?

Apr 12, 2020 · The caulk is do... This video shows how to seal/ caulk narrow and tiny gap space between wall floor stairs and wall after installing new stairs using silicon.

Do I need to seal a gap in caulk around stairs?

handymac. 14 years ago. If there is a stud back behind the wall, cut a piece of wood to fit in the hole, nail it with a couple nails, and use drywall mud to fill smooth---and then as it is almost dry, you can texture it kinda like the wall. Or, use the base molding ---with a …

Why is there a gap between stairs and wall?

Stairs undergo stress from weight, expansion and contraction. Components of stairs should fit together tight, but it's not always possible. The horizontal parts of steps, also known as treads, can noticeably pull away from the wall area. Closing such gaps takes more than caulk or putty -- which won't stay put anyway.

How do you fix a stair gap?

How to Fix a Gap Between StairsVacuum the gap clean using a vacuum with a hose attachment, or use a broom and dustpan to clean it.Load a caulk gun with a colored latex or acrylic caulk. ... Cut the tip of the caulk tube with a utility knife on a rough 45-degree angle. ... Caulk the stair gap from one side to the other.More items...

How do you fill the gap between stair tread and riser?

Cut the tip off of a tube of colored silicone with a utility knife. Make the cut 1/8-inch from the top at a 30-degree angle. Squeeze a bead of silicone along the gap. It should fill the gap and protrude up about 1/8 inch.

How do you fill the gap between stair tread and stringer?

Run a bead of paintable silicone caulk in the gap. ... As an alternative to caulk, press wood putty into the gap with a flexible putty knife, pressing it in firmly and building it up slightly higher than the surface of the tread. ... Install carpeting on stairs to hide small gaps between the tread and stringer or riser.More items...

How do I cover this gap between wall and stairs? Photos!

We remodeled our kitchen and dining room. In doing so we removed old baseboard and trim around room and around a set of steps. We replastered walls and added new flooring. We're about to replace baseboard but now have a gap where a piece of the stair handrail support use to be.

Comments (13)

If there is a stud back behind the wall, cut a piece of wood to fit in the hole, nail it with a couple nails, and use drywall mud to fill smooth---and then as it is almost dry, you can texture it kinda like the wall.

Hazel Wood

Our house is almost 200 years old and the stairs is the original with a lot of repairs. As you can see in the picture there are massive gaps between the wall and the stairs. How do I fix this?

JobAndKnock

Google "Fossa caulk saver". Shove that in the gaps, repair the damaged plasterwork with a filler (eg Polyfilla) then when dry use decorators caulk with a silicone finger to complete the task

Gaps between stairs! Help!!!

So we got a little too excited about DIY and decided we were going to rip up the carpet on the stairs. The plan was to just sand and paint the existing stairs and risers. What we didn't know before ripping out the carpet is that there is a gap in between all of the stairs. Not really sure where to go from here.

Comments (12)

Looks like these stairs were always meant to have carpet on them... hence the short cuts with the original carpenter. If you are going to use a quarter round, it may stick out too much and people may trip on the steps, as this shortens the depth of the steps. Ask a carpenter to come out and give you a quote to redo the steps....