From my experience the seatbelt sensors are usually the most likley candidate, when airbag lights go astray. The only way to fix it is replace the buckle. With that said a dealership should becable to scan the system and tell you exactly what the issue is.
Full Answer
How do I get a repair guide for a PT Cruiser?
Access our PT Cruiser 2006-2007 Removal & Installation Repair Guide Non-Turbo Models by creating an account or signing into your AutoZone Rewards account. Once you sign in, follow these instructions to access our Repair Guides. Add your vehicle in Manage My Vehicles.
How do I reset the airbag light on my car?
How to Reset an Airbag Light. 1 Step 1 - Plug in Components. If there are any unplugged components within the dash you will need to plug them in before attempting to reset the airbag ... 2 Step 2 - Turn Ignition to "On". 3 Step 3 - Time Airbag Light. 4 Step 4 - Turn Ignition "On" After 3 Seconds.
How do I know if my passenger airbag sensor is bad?
The way you know if the sensor is at fault or not, before scanning your airbag system for faults, is to simply look at the “Passenger Airbag Off” light. If there’s no one in the seat, the light should illuminate. If there is someone in the seat, the light should turn off, signifying that the system is armed.
How do I know if my airbag light is armed?
If there’s no one in the seat, the light should illuminate. If there is someone in the seat, the light should turn off, signifying that the system is armed. The default state of the bag is to arm, so there’s likely no case where someone will sit in the seat and the airbag will not deploy.
How do I get my airbag light to turn off?
Conclusion – How to Reset Airbag LightTurn your ignition on and off.Restart your vehicle and do a test drive.Examine the passenger airbag switch.Inspect whether seat belts are fastened or working correctly.Verify that the passenger seat sensor is not applied.Use a scanner with an SRS or airbag light reset option.More items...
How do I reset my airbag light manually?
1:573:17(Part 1) How To Fix Airbag Light - Fast & Easy! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I'm just going to show you down under here. Okay these connections here there's these harnessesMoreSo I'm just going to show you down under here. Okay these connections here there's these harnesses there's there's four different harnesses up in here all I did was I just I just like grabbed both of
What causes the airbag warning light to come on?
If your airbag has been deployed and has not been properly reset, the airbag light will be on. If the airbag hasn't been deployed, the light will come on when the system senses that it cannot activate the airbag; this means that there is some sort of a problem with the airbag system in your vehicle.
Can a blown fuse cause the airbag light to come on?
There are many possible fuses that could be behind this, but fuse #13 is a likely culprit. If your airbag light is on and your rear windshield wiper doesn't work, then it's a pretty good indication that you need to change fuse #13 and possibly others. Blown fuses can definitely cause the airbag light to come on.
Can I reset airbag light without tool?
It is impossible in most car models to reset the airbag light without a scanner. This is for safety cautions because you should always repair the fault after the airbag light occurred. Luckily, in many car models, the airbag light will also go away by itself if you have repaired the problem.
How much does it cost to fix the airbag light?
Number 1 -- Reset Airbag Light This process can take several hours of time and usually costs a few hundred dollars, although depending upon the type of car it may be up to about $600.
Can you drive with airbag light on?
When the airbag light illuminates, it means that there is a problem with the system. Most likely, the airbag will not deploy in an accident because of this fault. Therefore, it is not recommended that you drive the vehicle until you have the system repaired. You should never ignore the vital warning.
Where are the airbag sensors located?
Usually, you have two airbag sensors located in the front of your vehicle behind the bumper. There is often also one airbag sensor installed inside of each door of your car.
Can airbag wiring be repaired?
Repairs of airbag wiring are allowed as long as the repair is in the main vehicle harness. Any pigtail wires attached to any sensors, etc. are not allowed to be repaired. Always solder any wiring repairs.
Does disconnecting the battery disable the airbag?
Even if an airbag looks fully deployed, it may be capable of a second deployment. Disabling the restraint systems is commonly done by disconnecting and isolating the negative battery cable.
Is there a fuse for the airbag?
The airbag in your vehicle likely a fuse but the fuse does not activate the air bags. Additionally, if your service airbag lights are on, your entire system will be inoperative.