how do you fix a small hole in a fiberglass shower

Full Answer

How do you repair a hole in a fiberglass tub?

• Polyester resin
• Hardener (catalyst to harden the resin)
• Fiberglass mesh or mat (for large or structural repairs)
• Colorants
• Sandpaper in assorted grits, from 80 grit (coarse) to 400 or 440 grit (very fine)
• Thickener (to stiffen the resin for vertical applications)
• Protective gloves resistant to the chemicals included in the kit

More items...

How do you repair a fiberglass shower floor?

• Make sure your shower is fiberglass by tapping it with your knuckle or a wooden spoon or similar item which will not damage the finish. ...
• Choose the appropriate color for the kit you will purchase. ...
• Make sure the kit you buy comes complete with everything you need, or purchase these materials and tools separately. ...

How to refinish a fiberglass shower pan?

• Superior white color, superior smooth coverage and glossy finish vs. competition
• 360⁰ valve- spray can at any angle- even upside down, one part epoxy - no need to transfer product between cans
• Covers 35-45 sq. Ft. ...
• Works on ceramic, porcelain, acrylic, and fiberglass surfaces
• High-gloss porcelain-like finish the color is Bright White

How to make old fiberglass shower stalls look new?

• It’s affordable. Because the square footage is at a minimum, the product/install will be as well
• HUGE bang for buck visually
• It gives the bathroom personality
• It’s a great visual connection to the other solid surfaces in the bathroom

How do you repair a hole in a fiberglass shower?

How to Patch and Filling Screw Holes in a Fiberglass Bathtub – 7 StepsSection Off Area with Painter's Tape. ... Squeeze & Mix the Epoxy. ... Fill in Screw Holes with Epoxy. ... Brush Extra Epoxy on Holes. ... Place Plastic on the Epoxy and Tap Over Them. ... Sandpaper Over the Holes. ... Peel Tape Off & Sandpaper Again.

Can you patch a fiberglass shower?

Affordable, attractive, and durable, fiberglass is nevertheless prone to cracking and pitting overtime. Fortunately, repairing a cracked or damaged tub or shower pan is a straightforward DIY job that most homeowners can do to save themselves money over an expensive replacement.

What can I use to patch a hole in a fiberglass tub?

0:034:02How to Fill a Hole in a Fiberglass Bathtub - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou always want to make sure the area is stuffed that you're going to either spray. Or put patchMoreYou always want to make sure the area is stuffed that you're going to either spray. Or put patch material on so i'm going to use bondo glass. And the high performance smoothening putty.

How do I fix a small hole in my shower?

1:3112:18HOW TO REPAIR A HOLE IN A FIBERGLASS BATHTUB ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipLike I do here's the almond additive if you have a white one you do not need to use that and you canMoreLike I do here's the almond additive if you have a white one you do not need to use that and you can discard. If you have a larger hole or crack.

How do I know if my shower is fiberglass or acrylic?

Look around the tub's edges and see if it appears thinner; this could be an indication that it is acrylic. Acrylic tubs usually come in more colors than fiberglass tubs, as fiberglass tubs are commonly white. Acrylic also feels warmer to the touch than fiberglass, and tubs made of acrylic have smoother finishes.

How do you plug holes in fiberglass?

When you are trying to repair a small hole in fiberglass, the best type of product to use is a premium epoxy. This will insure a proper repair and will not allow for shrinking of the material and create a water tight seal. We recommend the Hawk Epoxy Kit. It contains the epoxy resin, catalyst and filler for the job.

Can you use Bondo to repair bathtub?

Bath tub repair can be simple. Bondo is a two-part putty made of polyester resin and has many uses. Bondo is mainly used on vehicles for repair but it can be used for repairing cracks in your bath tube. Bondo can be shaped into almost any shape once it has hardened and then it can by primed and painted.

How do you repair a plastic shower wall?

You can usually fill 1/4-inch holes with epoxy paste, but to be on the safe side, it's a good idea to lay a small piece of fiberglass cloth over each hole after you've applied the paste and recoat with a little more paste. When the paste sets, apply one more coat and then sand and polish.

How do you fix a small hole in an acrylic tub?

1:095:36HOW TO FIX A HOLE IN A FIBERGLASS BATHTUB - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd we have to sand the edges. Sanded then you have to clean the surrounding. Area with the alcoholMoreAnd we have to sand the edges. Sanded then you have to clean the surrounding. Area with the alcohol wipe Oh rubber gloves and respirator recommended.

Can you fix a hole in a shower?

Tub and shower refinishing kits contain resin compounds that harden to form a dense, durable patch on your shower or tub wall. Mix up the compound and hardener according to the directions on the kit and apply it to the hole in the tub or shower with a putty knife.

Can a hole in a fiberglass tub be repaired?

The most obvious way to repair a crack or hole in fiberglass is to use a fiberglass bathtub repair kit, which you can find at any home improvement outlet. A typical kit includes two-part epoxy filler in your chosen color, application sticks, cleaning swabs, fine-grit sandpaper and polishing compound.

How do you fix fiberglass?

1:177:00How to Repair Fiberglass - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt is not enough to just squirt some glue on it the damaged fibers must be completely replaced sinceMoreIt is not enough to just squirt some glue on it the damaged fibers must be completely replaced since the gelcoat is also damaged we will repair the entire piece all the way through.

How long does it take to repair a fiberglass tub?

In either case, it’s surprisingly simple. By using a basic epoxy kit with a few essential items, repairing a fiberglass tub takes as little as one day, with most of that time spent as the compound dries.

How to get rid of soap scum?

Prepare the Area – Before getting started, clean the area with household cleaner and a sponge. Use rubbing alcohol, acetone, or a similar solvent capable of removing oils, soap scum, and glass fibers. Drill as Needed – When a lack of support is the root of the problem, you need to address the issue head on.

Can acrylic shower base be cracked?

Additionally, if something heavy drops on the surface, it could leave a large crack or a substantial hole, especially if the base isn’t properly supported. Superficial chips, cracks and scratches may only require simple filling ...

Is fiberglass bathtub durable?

Affordable, attractive, and durable, fiberglass is nevertheless prone to cracking and pitting overtime. Fortunately, repairing a cracked ...

Can you use fiberglass mesh for putty?

For larger cracks and pits, it may also be necessary to purchase fiberglass mesh to reinforce the putty and make it less likely to dimple. As a rule, use mesh for any crack wider than a quarter-inch or an open hole that is too large to fill in with the resin mixture alone.

Why does my shower have a crack?

It's natural for a tub or shower to sometimes get cracks, gouges or holes because of the constant wear and tear on the appliance. In most cases, the entire tub or shower won't break, but it's the smallest of areas that can suffer from a crack.

What to do if you don't have extra tile?

If you don't have extra tiles from the original installation, break off a chunk of the broken tile and bring it to any of your home improvement or hardware stores. The staff will be able to help you match the shade and texture of the tile. Also, don't forget to measure the size of your tiles.

Do you have to replace the whole tile in a shower?

Most showers are tiled, so you may have to replace the entire tile. If you don't have to replace the whole tile, you can patch up the area. Advertisement.

Can a small hole in a shower cause damage?

One may think that these small nicks don't need to be fixed unless they look unsightly, but even the smallest of holes in a shower or tub can cause significant damage. The small hole will allow water to get behind the surrounding material, which can cause deterioration to your entire bathroom. Have no fear though: There are ways ...