How to Fix a Price Pfister Shower Faucet
- First Things First, Turn Off The Water.. You always have to shut off the water whenever you are working with the...
- Remove The Handle.. Using a flat screwdriver, take off the cap covering the handle screw (with the screwdriver’s aid,...
- Take Both The Escutcheon And Trim Plate Off.. Turn the escutcheon counterclockwise to...
Full Answer
How to rebuild a Price Pfister faucet?
Tools and Supplies You Will Need
- Small flat-head screwdriver
- Phillips screwdriver
- Channel-lock pliers
- Rag (as needed)
- Penetrating oil (as needed)
- Plumber's grease
- Replacement cartridge (as needed)
How to remove a Price Pfister faucet?
The Procedure for Removing a Pfister Faucet
- Turn off the hot and cold shutoff valves and open the faucet to relieve pressure.
- Disconnect the faucet supply hoses from the shutoff valves by unscrewing the connectors with locking pliers or a wrench. ...
- Uncouple the hoses connecting the spout and sprayer to the faucet diverter. ...
Where is the model number on Price Pfister?
- The first thing to know about kitchen hole patterns is that many different faucet types can fit the same one. ...
- The most common kitchen hole preparation is a 3-hole pattern, where the left and right holes are 8" apart. ...
- 4 hole configurations often exist to accommodate an accessory, like a sidespray, soap pump or air gap.
How do you repair a single lever Price Pfister faucet?
Fix nozzle spray stream stuck. Disassembly, Repair.
How do you take apart a Pfister shower faucet?
0:073:58How to Replace the Cartridge on Pfister OX8/JX8/VB8/JV8 ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you're showered features quick trim locate the set screw at the bottom of the handle and loosenMoreIf you're showered features quick trim locate the set screw at the bottom of the handle and loosen it with a 3/32 allen wrench then pull the handle straight off. Now unthread the retainer washer.
How do you fix a Price Pfister shower valve?
0:3932:28How to fix a Leaking Price Pfister Shower Valve - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne way with putting a whole brand new cartridge stem in there this is the whole price Pfister oneMoreOne way with putting a whole brand new cartridge stem in there this is the whole price Pfister one right here it's the whole unit.
How do you repair a Price Pfister Single Handle shower faucet?
0:007:37How to repair a Price Pfister leaky shower head - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is all that you're going to need you're going to need the tool of needlenose plier hereMoreThis is all that you're going to need you're going to need the tool of needlenose plier here Phillips screwdriver and a blade of some sort in this case I have a razor blade.
How do I remove a Price Pfister shower cartridge?
0:0810:23Beginners guide to replacing a Price Pfister shower cartridge! - YouTubeYouTubeStart of suggested clipEnd of suggested clipRight there where my screwdriver is going in you'll usually be able to get like a putty knife orMoreRight there where my screwdriver is going in you'll usually be able to get like a putty knife or something in there and uh pop. That little tab off so you can unscrew the set screw.
How do I remove Price Pfister shower spout?
1:005:42How to Replace a Bathtub Spout (Easy 5 Minutes Task) - YouTubeYouTubeStart of suggested clipEnd of suggested clipHold the tuff spout firmly with one hand while the other hand used the screwdriver to turn itMoreHold the tuff spout firmly with one hand while the other hand used the screwdriver to turn it counterclockwise slowly to loosen once it's loosened use both hand and slowly unscrew it from the pipe.
How do you fix a leaky single handle shower faucet?
0:172:38Repairing a Leaky Single Handle Tub/Shower Ball-Type FaucetYouTubeStart of suggested clipEnd of suggested clipTurn off the main water supply to your home. For an obstacle remove the index button by prying offMoreTurn off the main water supply to your home. For an obstacle remove the index button by prying off with the screwdriver. Then unscrew the handle screw. And remove the handle.
How do I remove cartridge from Pfister faucet?
0:182:19How to Replace Hot and Cold Cartridges on a Pfister Widespread ...YouTubeStart of suggested clipEnd of suggested clipRemove the on/off handles by turning the base counter clockwise until it can be removed. If yourMoreRemove the on/off handles by turning the base counter clockwise until it can be removed. If your handles have set screws loosen them with a 3/32 allen wrench and remove the handles.
How do you take apart a shower handle?
1:499:09How to Repair a Moen Shower Faucet Step-by-Step - YouTubeYouTubeStart of suggested clipEnd of suggested clipPart right in the center and it's a Philips head screw. That you're gonna have to take out and thatMorePart right in the center and it's a Philips head screw. That you're gonna have to take out and that just holds a little plastic insert that holds the handle.
How do I disassemble a Price Pfister bathtub faucet?
11:0419:11Price Pfister Shower Valve Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I unscrewed that thing and I pulled the first part of it off and then looking inside you'll seeMoreSo I unscrewed that thing and I pulled the first part of it off and then looking inside you'll see this little cartridge in here. And then you can pull this little cartridge.
How do you change a shower cartridge?
How to do itremoving handle from faucet. Remove Handle. ... removing retaining clip. Remove Retaining Clip. ... remove cartridge with wrench. Remove Cartridge. ... replacing o-rings on cartridge. Replace O-Rings. ... installing new cartridge. Install New Cartridge.
How do I know what shower cartridge I have?
1:323:16Who Made Your Shower Faucet? Tips to Find the Brand and ManufacturerYouTubeStart of suggested clipEnd of suggested clipOnce those screws are out you should be able to just pull this plate. Off and then you can lookMoreOnce those screws are out you should be able to just pull this plate. Off and then you can look behind the plate to see if there's a sticker in here that has the manufacturer.
How do you replace a single handle faucet cartridge?
0:372:26Repairing a Leaky Single Handle Cartridge-Type Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a wrench to remove the retainer. Next pull the cartridge from your father. Now that you removeMoreUse a wrench to remove the retainer. Next pull the cartridge from your father. Now that you remove the cartridge you need to take it to your local retailer.
What to use to fix a valve that is not leaking?
Lubricating is best used when the problem is not a leak but something along the lines of a stiff handle. Try to see if lubricating the cartridge solves the issue. One of the best solutions you can use is silicone grease as this helps the cartridge move more smoothly within the valve body.
Can you still take off the handle on a bath?
While you can technically still remove the handle and trim the plate before shutting of the water, there’s always a chance that you will turn the cartridge on when you remove the handle.
Can a shower valve pull out?
For instance, a pull and turn tub and shower valve can be hard to pull out. As such, the cartridge needs to replaced and usually that fixes the problem, and so does lubricating the o-rings. Water dripping is also a sign that your shower cartridge is worn out. This issue can be remedied by replacing the cartridge.
Step 1: It Leaks, and Its Annoying
So the way these things work is, your handle works kind of like an airlock.. but with water, so its a water lock. As you turn the handle it opens two valves which you'll see later, the more you turn the handle the more water is let through both of those valves and it gets hotter, or colder.
Step 2: Removing the Handle
super important dealing with tiny little parts here and the last thing you want is for them to go down the drain, so shut that thing.
Step 3: Clearing a Path
Now depending on how your equipment was installed you might be able to get to the 4 screws that we need to remove to get the big grey piece of plastic outa there.
Step 5: Checking for Damage
Now this is going to come apart in pieces, you want to look at each set and the O rings make sure there is no crack or rips in them. Also another good idea to take pictures of this as it comes apart, easier to put it back together.
Step 6: All Done (with Luck)
These things are tricky and while it doesnt seem like much, it took me awhile to get all of the pieces to go back together in the right order, I did not follow my own advice and take pictures of the pieces as they came apart, stupid me.
Where is the diverter valve on a Pfizer shower?
The valve is located behind the middle handle of the three-handle faucet assembly. Price Pfizer's diverter valve uses a compression stem and a single rubber washer to redirect the flow of water from the tub's spout to the shower head so that the shower can be used.
How do I remove the trim plate from a shower?
To remove the retainer nut, grasp the nut with slip-jaw pliers, then twist the nut in a counterclockwise direction until loose. Pull the trim plate away from the wall to remove it.
How to contact Pfaucet for replacement?
If your product is covered by our Lifetime Warranty, please contact our customer service team for your product parts: 1-800-PFAUCET ( 1-800-732-8238 ). To purchase replacement parts for your out of warranty faucet, visit our Where to Buy page and select the online retailer section. If you are not sure whether or not your faucet is covered under warranty, please contact us before purchasing parts.
How to identify a faucet repair?
The first step to faucet repair is to identify the product you are working with. The product model number (usually an 8 digit code, i.e. F-529-7AYY) is displayed on the product package and on the instruction manual right below the product name.
How does a Price Pfister shower faucet work?
It works with the handle functioning like an airlock, only that the element going through it is water. By turning the handle, the valve will open 2 valves that let more hot and cold water through as you turn the handle more.
Why does my faucet wear out so quickly?
This type of faucet definitely has a lot of moving parts in it, which means that it is more likely to get wear out more quickly than other types of faucets. Due to constant use, the seals inside it, such as the O ring, wear away and cause leaks, which you should repair.
