To repair your Mini Maglite LED AA, use our service manual. Twist tail cap counter-clockwise until tail cap is completely loose. Slowly remove tail cap to release batteries from the barrel of the flashlight.
Full Answer
How do you fix a broken Maglite?
How to Fix a Maglite. First, make sure the batteries are in good working condition. Second, make sure the bulb is in good condition and electricity is flowing properly to the bulb. Remove the end cap and take the batteries out of the Mag-Lite (R) handle.
How do I remove the switch on my Maglite Mini Mag?
It is removed using Maglite's switch removing tool, also known as the replacing tool. The removal tool is shown here, ready to be inserted into the body of the Mini Mag.
What should I do if my Mini Mag light stops working?
Use caution, as that strip of metal can fall out. If these contacts fall out and are not placed back into the Mini Mag switch correctly, it will stop the light from working. These contacts are very small so be careful as soon as the outer part of the switch is removed.
How long does it take to set up the Mini Maglite?
It only takes a few minutes to set up the Mini Maglite, after which it is ready for use. The Mini Maglite requires twp AAA batteries for proper operation. The batteries are inserted in the base tubing. To insert the batteries, twist the tail cap until it is removed from the base.
Why does my Mini Maglite not work?
Once the inner part of the switch is removed it shows the positive contact as a small round piece of metal in the center of one side of the switch. If the contacts do fall out of the switch, they can easily be replaced. But if the contacts are not placed back into the switch correctly, the Mini MagLite will not work.
Why did my Maglite stop working?
Examine the bulb for corrosion or debris that may be interfering with the bulb's operation. If it is clean, look for damage to the bulb or receptacle. If the receptacle is damaged, you will most likely have to replace the flashlight. If not, install a new bulb.
Can Maglite be repaired?
Mag or an authorized Mag Warranty Service Center will, free of charge, repair or, at its option, replace a defective flashlight or component.
Do Maglite bulbs burn out?
The mini mags are almost indestructible, batteries are easily found, but when the bulb burns out, you're out of luck... especially if you are outdoors hunting, fishing, or camping at night when you REALLY need it. Many of you may not know that a spare bulb can be kept under the butt cap underneath the spring.
How do you fix a flashlight that won't turn on?
0:081:08Troubleshooting Problematic Flashlights - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first thing to check when you're having problems with your flashlight is the battery. Make sureMoreThe first thing to check when you're having problems with your flashlight is the battery. Make sure use a voltmeter or a battery tester to confirm that your battery has the correct voltage.
How do you open a Mini Maglite?
Unscrew the tail cap from the Mini Maglite flashlight by turning it in a counterclockwise direction. Tilt the Mini Maglite until the batteries slide out. Properly dispose of the new batteries. Check that the battery contacts on the tail cap and light end of the Mini Maglite are clean and free of corrosion.
Does Maglite have a lifetime guarantee?
The Maglite Flashlights Limited Lifetime Warranty Every Maglite Flashlights product is warranted to be free of defects in material and workmanship for the life of the owner. Maglite Flashlights will repair or replace with a new item (at their option) any Maglite Flashlights product that is defective.
How do you disassemble a Maglite?
8:4313:35MAGLITE - Disassemble & Remove that Stuck Battery the Proper WayYouTubeStart of suggested clipEnd of suggested clipEven two millimeters. And you're going to have more room to play with this ring while you're diggingMoreEven two millimeters. And you're going to have more room to play with this ring while you're digging around with your flathead screwdriver.
What model Maglite do I have?
The only way to differentiate between the models is to look down the business end of the light through the clear plastic packaging. With the D-cell lights, the serial number also indicates the type of LED inside. If the serial number begins with DLXXXXXXXXX, it is either Cree XP-E or Luxeon Rebel.
Can you put an LED bulb in an old Maglite?
The easiest way to upgrade your older incandescent Maglite is by buying a LED PR bulb replacement. Maglite has provided these PR LED emitter bulb replacements for many years. They are an easy way to increase brightness and extend the runtime of the Maglite multifold above that of the incandescent.
How do you change the bulb in a Mini Maglite?
How to Change a Maglite BulbStep 1: Remove the Batteries. ... Step 2: Remove the Glass Cover. ... Step 3: Remove the Bulb. ... Step 1: Fit the Bulb into the Collar. ... Step 2: Screw on the Collar. ... Step 3: Replace the Head. ... Step 4: Replace the Batteries. ... Step 5: Test the Flashlight.
Can you replace the LED in a Maglite?
1:485:10LED Replacement Bulb for Maglite - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut I'll take this off to change it out you simply just take off the top and get to access to theMoreBut I'll take this off to change it out you simply just take off the top and get to access to the bulb. And I'll kind of show you what that looks like as far as brightness. Be careful if you turn it
Step 2 Removing Battery Spring
Gently pull the battery spring from the tail cap by slowly tugging side to side at the base of the spring until it clears the edge of the tail cap.
Step 3 Removing Head Cap
Twist head cap counter-clockwise until head cap becomes completely loose from the barrel of the flashlight.
Step 4 Head Cap Disassembly
Twist face cap counter-clockwise until face cap is completely loose from head cap.
Inserting Batteries and Regular Operation
The Mini Maglite requires twp AAA batteries for proper operation. The batteries are inserted in the base tubing. To insert the batteries, twist the tail cap until it is removed from the base. Slide the batteries into the tube with the positive ends facing the bulb of the flashlight.
Candle Mode
In addition to the flood and spotlight beams, the Mini can act as a candle. In candle mode, the light is not directed at a single point, but rather provides 360-degree illumination. To place the Mini in candle mode, twist the head of the flashlight until it is at full spotlight. You will notice there is resistance when you try to turn it further.
Changing the Bulb
When the bulb dies on the Mini, remove the batteries from the base of the flashlight and leave the tail cap off. Remove the head of the flashlight to expose the bulb. Gently pull the bulb from the base of the Mini and discard. Pull the spare bulb out of the tail cap and insert it into the socket of the base.
Are Mag flashlights waterproof?
We consider our flashlights to be extremely water resistant but we don’t advertise them to be waterproof.
How can I tell if my alkaline batteries have leaked and damaged my flashlight?
Visual signs of battery leakage and crusty deposits (corrosion) inside your flashlight are a sign of leakage and damage, and if the flashlight is non-functional, this corrosion damage is likely the cause.
Is battery-leak damage covered by my warranty?
No. Battery exhaustion, battery leakage, and flashlight damage caused by battery leakage are all specifically excluded from your warranty. You may, however, be able to get help from the battery manufacturer if a battery leak damages your flashlight. See the next FAQ below for details.
If my flashlight is damaged by a battery leak, what should I do?
Because our warranty excludes battery-leak damage, you should NOT take or send the flashlight to Mag Instrument’s Warranty Service Department.
What Is ANSI?
In 2009, the American National Standards Institute, in cooperation with the National Electrical Manufacturers Association, published a standard called the ANSI/NEMA FL 1-2009 Flashlight Basic Performance Standard.
