- Over boarding ceiling and plastering would be quick and less destructive
- Find a mosaic tile sheet that compliments wall tiles and cut into 'border strips'
- Fill/plaster gap and paint in with ceiling (ok, I've already suggested this
- Use a timber trim and 'glue' in the gap. Either paint with ceiling paint or whatever used on woodwork
Full Answer
How do you fill the gap between wall and tile?
You can use a tile-setter and cement to construct an extra layer of ‘wall’ for filling the gap. Then, enclose the gap between your original wall and tile. Flush the ‘fake’ wall to their surface and you’re done!
How do you cover a gap between ceiling and wall?
Here’s how to do so seamlessly to conceal the gap and create a flush look throughout. Start by placing a strip of fiberglass mesh drywall tape over the gap so that the top edge of the tape is flush against the ceiling. Then, cover the mesh tape with joint compound (also known as mud) using a putty knife.
How do you fill gaps between mesh tape and woodwork?
Then, cover the mesh tape with joint compound (also known as mud) using a putty knife. Press the mud firmly so it goes through the mesh tape and into the gap – this is ultimately what is filling in the gap. The mud should cover the tape completely.
How to fill gaps between bathroom siding gaps?
For filling gaps with a size of around ¼”, baseboards are perfect! So, all you need to do is put the baseboard between the gaps and simply grout them. And voila! It’s done! Apart from wooden baseboards, there are multiple things you can use as alternatives too: We’d like to give you an additional tip.
Do you caulk where tile meets ceiling?
0:261:00How to caulk ceiling to tile in the shower. #shorts #diy ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipClear caulking is important make sure it's clear caulking it goes on wide but it clears up in caseMoreClear caulking is important make sure it's clear caulking it goes on wide but it clears up in case uh the caulking.
How do you fix a small gap between a wall and a ceiling?
How to fill a gap between drywall and ceilingStep 1: Mesh drywall tape. Start by placing a strip of fiberglass mesh drywall tape over the gap so that the top edge of the tape is flush against the ceiling.Step 2: Apply joint compound. ... Step 3: Paper tape. ... Step 4: More mud. ... Step 5: Let the mud dry. ... Step 6: Sand. ... Step 7: Paint.Sep 25, 2019
How do you fill a large gap between tile and wall?
Answer: A single bead of caulk can fill a gap of ¼ inch. If the gap is greater than that, then simply apply to the deeper areas. Then, wait for your caulk to dry. Next, apply another layer of caulk.Feb 13, 2021
How do you fill gaps in the ceiling?
0:192:35How to Fix Gaps in drywall angles by Hand - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt up into that angle. Cover that angle with this piece of flat tape.MoreIt up into that angle. Cover that angle with this piece of flat tape.
Can you caulk between ceiling and wall?
Method #1: Using Caulk Place a second piece on the ceiling, about 1/8″ out from the wall. Run a line of caulk along the opening in between the two strips of tape. Run a wet finger or ice cube along caulk to smooth. Remove tape immediately.
What should I put between wall and ceiling?
All it takes is a quick patching job with fiberglass mesh tape. You can then proceed with normal joint taping techniques, using drywall joint compound, which drywall professionals refer to as mud. In the end you'll create a seamless looking joint between wall and ceiling that conceals the gap completely.
Do you put grout between wall and tile?
The Tile Council of North America recommends at least a quarter-inch gap between the tile floor and the walls. Never fill this gap with grout, because tile grout is not flexible. Instead, fill it with an elastic material capable of sustaining the movement of the floor and the movement of the wall.
How big of a gap can you fill with silicone?
A single bead of caulk can fill gaps up to 1/4 inch. If the gap is slightly larger than this, fill it with a bead of caulk deeper into the gap, but not flush with the surface. Wait until the caulk is completely cured before coming back to put a surface bead on.
How do you caulk a 1/2 inch gap?
0:0510:49How to Caulk BIG GAPS!!!! - YouTubeYouTubeStart of suggested clipEnd of suggested clipOkay so the things you're gonna need is some backer rod a putty knife a caulking gun and preferablyMoreOkay so the things you're gonna need is some backer rod a putty knife a caulking gun and preferably some latex caulking. But this can be applied to actually filling any large gaps with caulking.
What is the best filler for ceiling cracks?
Polycell Crack-Free Ceilings is a great way to restore cracked ceilings to a smooth 'good as new' finish. It's flexible paint formulation uses Polyfilla technology to not only cover cracks but prevent them from reappearing.
How do you fill gaps between crown molding and ceiling?
0:262:11How to caulk gap between crown molding & ceiling. #handyman ...YouTubeStart of suggested clipEnd of suggested clipThis is going to make it super easy to paint once the clock dries. So once everything's blue tapedMoreThis is going to make it super easy to paint once the clock dries. So once everything's blue taped cocktail i'm using extreme stretch caulk by dap it says it could fill gaps up to 3 inches.
How do you fix a crack where the wall meets the ceiling?
0:121:27How to FIX CRACKS between WALL & CEILING | Tips & Tricks - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe solution whack out the no more gaps as i like to call it and get cracking. First cut out anyMoreThe solution whack out the no more gaps as i like to call it and get cracking. First cut out any loose pieces that you see. And apply a sufficient amount of no more gaps with your caulking.
Maurice Tiberius New Member
the only way that comes to my mind to make that part flush is to fill the gap with a filler, smooth it out and repaint it. Or would you suggest a different way?
terrymac Screwfix Select
Fit coving ,preferably to a better standard than the tiling and grouting.
Jord86 Screwfix Select
Once you've beaten the tiler to death with his own arms, you could double board the ceiling, weighing it up against coving it the price difference would probably be less, especially if it's a small bathroom and its two sheets of plasterboard. Plus you wouldn't have to remove anything.
Jord86 Screwfix Select
Ahh, I had to laugh. And cry at the same time. I am still looking for the secret of finding reliable, good craftsmen. Despite all our efforts and a series of failures, we ended up with that guy and he left us with a bad job. But for now it is about finding good compromises and see what I can do myself (or not).
stevie22 Screwfix Select
I have put in a soldier course in these circumstances but here I'm with DIYDave.
Astramax Super Member
The finished job is down to bad planning or in this case no planning or forethought. I'm with Jord on this ......plasterboard ceiling tis the best solution by far.
Jord86 Screwfix Select
17mm at the widest on the left, 9mm at the corner on the right. And a stiff drink for Dave, he's hyperventilating.
What is the best way to fill the gap between ceiling and tile?
Whats the best way to fill the gap between ceiling and tile? I was going to use grout but i read that; - it can crack with the movement in the ceiling. - you should use decorators caulk so it can be painted but isn't waterproof. - silicone is water proof but can't be painted. - use grout then silicone on top...
Can you paint over silicone caulk?
Silicone is good but like you say you cant paint over it. A good quality decorators caulk will give you the option of painting it. There are also sealants available that are paintable too. Gorilla mould resistant paintable sealant is one example. 2019-09-02T20:05:02+01:00. Answered 2nd Sep 2019.
How to seal gaps between tile and wall?
Carefully seal the gaps between your tile and wall. It is recommended that you hold the gun at 45 degrees while applying the caulk. Once you’re done, smoothen the caulk using a caulking tool. You know, caulks are actually used for many purposes in this way.
How long does it take for caulk to dry?
For the final step, let the caulk dry after you’re done sealing the gap. Wait for 24 hours to let it completely dry. Afterward, search for any uneven places. Because sometimes, there might be holes inside your caulks by termites after caulking. If that’s the case, apply the caulk again in those specific damaged areas.
Can you use cement as a sealant?
Simply remember that caulking is a common solution to this problem. Otherwise, using cement as a sealant can also serve the purpose. Using baseboards or another layer of the wall are other options you can go for! Good luck!
Can you grout between walls and tile?
Question: Can you grout between wall and tile?#N#Answer: It is not recommended to grout between wall and tile. This is because grout is not flexible. And it cannot withstand the pressure of walls. This will lead to the cracking of walls. So caulking is recommended instead.
Why does my ceiling have a gap?
The most common reason is the ceiling changing height across the length of the wall either due to the it settling unevenly or otherwise shifting over time. An occasional lack of precision during installation may also cause a gap issue.
Is dry wall work a perfect process?
Drywall work isn’t always a perfect process, even for experienced pros who sometimes feel like they could complete a job in their sleep. There is always a lot of room for error and a lot of opportunity for things to go wrong.
Gap between shower tile and ceiling- what do I do?
I’m in the middle of a master bathroom remodel. Contractor finished setting tile on Friday and I noticed there is a 1“ inch gap between the top of the tile and the ceiling.
Comments (11)
He should have split the difference top and bottom and cut tiles to fit. Also, that two piece thing to the left of the niche would bug the crap out of me.
Can tile crack grout?
Whenever tile has a right angle like that, grout is prone to fail so caulk is used. Tile stores generally sell caulks that match the grout. Your walls and floors are pretty stiff, but there can be movement between the two that will crack the grout.
Can you use caulk on tile?
Yeah, it's always best to remove the grout. It doesn't have to be perfect, but you want the caulk to bond to both tiles. You can use masking tape on both sides of the caulk bead to be able to pull a straight line easily without a lot of mess. It will also allow you to force caulk into the void for a good seal.
