How do you extinguish pine logs? To put out a Duraflame log, carefully douse the log with water or sand. If one is available, use a dry chemical fire extinguisher.
Full Answer
How do you take care of a pine log home?
Because pine is a natural material, the wood requires preservation and regular maintenance to retain its natural beauty. Inspect your log home annually for any signs of insect infestation, fungi, mold or mildew. Once a year (fall is a good time) use a stiff broom to remove all surface debris, pollen and dust.
How do you seal wood logs for outdoor use?
Apply a penetrating oil-based sealer to the logs. The sealer can be hand brushed on for heavier coverage, or two coats with an airless sprayer will provide adequate coverage. Exterior log walls that have full sun exposure require an extra coat of sealer. A colored stain can be added to the sealer to intensify or change the color of the logs.
How do you clean logs from a fire pit?
Rinse the logs down, starting at the eaves and working down to the foundation. Use a pressurized nozzle and garden hose or a commercial pressure washer set to a low setting. Allow the logs to air dry.
How do you extinguish a Duraflame log?
If you need to extinguish a burning log, do so thoroughly, to avert the possibility that it may reignite. Pour water over the Duraflame log in a slow, controlled manner using a metal container. This helps reduce the risk of splashing ash or scattering sparks or burning material.
How do you extinguish a firelog?
In an emergency, how can I extinguish OUTDOOR firelogs? Carefully douse fire with water or sand or use a dry chemical fire extinguisher.
Is it safe to roast marshmallows over Pine Mountain Logs?
It is not recommended to cook over firelogs.
How do you put out a log fire at home?
0:031:13Fireplace Maintenance : How to Put Out a Fire in a Fireplace - YouTubeYouTubeStart of suggested clipEnd of suggested clipLike a blanket a towel or anything like that flowers are readily available material in most homes.MoreLike a blanket a towel or anything like that flowers are readily available material in most homes. Just take the container. And dump it onto the fire and it'll smother the fire.
Can you put a firelog in a stove?
Only use in fireplaces or appliances suitable for coal or wood fires. Do not use on a hot grate, on barbecues or in wood burning stoves. Do not move the firelog once lit. It is not designed as a heating product.
How do you use Pine Mountain Firelogs?
Using Firelogs OutdoorsLoosen the wrapper around the firelog without tearing the paper.Simply place the firelog on the fireplace grate with the logo facing forward.Light the arrows marked on the wrapper.
How long do Pine Mountain Logs burn?
3 hoursLONG LASTING AMBIENCE: The log burns for up to 3 hours, providing the ultimate natural ambience with big, bold flames. It's quick & easy to light and burns more evenly and consistently than real wood. It comes wrapped in paper for no-mess handling & portability.
Can you pour water in a fireplace?
Water should not be poured on a fireplace because it can cause messy ash, more smoke, and potentially crack the masonry. Depending on the type of wood and the heat of the flame, using water to put out a fire can also cause smoke inhalation and steam burns. Water should only be poured on a fireplace in an emergency.
Does salt put fires out?
Salt will smother the fire almost as well as covering it with a lid, while baking soda chemically extinguishes it. But you'll need a lot of each--toss on handfuls with abandon until the flame subsides. Avoid using flour or baking powder, which can explode in the flames instead of snuffing them out.
How do you make a log burner go faster?
Lightly spray water or baking soda over the top of the embers to help put the fire out completely. Close the stove door. Sweep out remaining ashes once the stove has cooled down enough.
What is the best wood to burn in a log burner?
Ash – (Scientific Name – Fraxinus) Ash is thought to be one of the very best woods for burning. Ash creates a steady flame and a good heat output. Unlike other wood, ash can be burnt when green, but like with most wood burns at it's very best when it is dry.Best Wood For a Stove - Charlton & Jenrickhttps://www.charltonandjenrick.co.uk › best-wood-for-a-s...https://www.charltonandjenrick.co.uk › best-wood-for-a-s...
Can I burn two Duraflame logs at once?
If your fireplace has a grate, then there is no limit as to how many logs you can use. However, if your fireplace does not have a grate and you want to burn the logs for longer than one hour then it is recommended that only two Duraflame Logs be burned at once.How many Duraflame Logs to use? - Fireplacehttps://fireplacetown.com › how-many-duraflame-logs-to-...https://fireplacetown.com › how-many-duraflame-logs-to-...
Can you put out a Duraflame log and reuse it?
Because Duraflame logs burn clean, they produce minimal ash, but once the firelog has burned out or once you have put out your Duraflame log, it's still a good idea to keep your damper open until all the ashes are cool.How to Put Out Duraflame Logs - Hunkerhttps://www.hunker.com › how-to-put-out-duraflame-logshttps://www.hunker.com › how-to-put-out-duraflame-logs
Step 1
Inspect your log home annually for any signs of insect infestation, fungi, mold or mildew. Once a year (fall is a good time) use a stiff broom to remove all surface debris, pollen and dust. Rinse the logs down, starting at the eaves and working down to the foundation.
Step 2
Chink and caulk the logs as required. Chinking is available from log contractors and can be applied with a caulking gun or putty knife. Read and carefully follow the manufacturer's product guide and application instructions.
Step 3
Apply a penetrating oil-based sealer to the logs. The sealer can be hand brushed on for heavier coverage, or two coats with an airless sprayer will provide adequate coverage. Exterior log walls that have full sun exposure require an extra coat of sealer. A colored stain can be added to the sealer to intensify or change the color of the logs.
Step 1
Vacuum or dust interior logs on a regular basis. Wood smoke, cooking greases and film produced by gas heat builds up on the logs over time, creating a dulling film.
Step 2
Examine interior logs. Are they sealed with a penetrating oil sealer or stain? Have they been varnished or coated with Polyurethane? If oil has been used on the logs, wipe them down with a soft cloth and a commercial cleaner/polish such as "Liquid Gold". This will cut the oily residue and restore the logs to their original beauty.
Step 3
Interior logs that have been varnished or coated with a top film sealer, need only to be wiped down with a bio-degradable mild de-greaser soap and water solution.
Step 4
Inspect exterior logs annually. Look for water damage, fungi, mold or insect infestation. Repair and treat as required. Repair and replace chinking as required. Chinking can be applied with a caulking gun or putty knife. Follow manufacturer's instructions on packaging label.
Step 5
Seal logs with an application of oil-based penetrating sealer. Stain may be added to the sealer to intensify or change the color of the logs. Sealer can be applied with a wide, soft paint brush or airless sprayer.
Cause and Effect
Unless you've chopped down a tree and sliced it into boards, the pine you're using has already been dried. Green lumber dries in a mill for up to a year. The lumber that most builders and woodworkers use -- studs, beams, planks or rough lumber -- should be ready to use when you purchase it, but that's not always the case.
Suspicious Minds
If you're suspicious that your pine may be too wet, or you find it visibly wet when you cut it, check it to make sure. Hand-held moisture meters read moisture content from inside the wood. The meter has two sharp pins on the bottom. Insert both pins into the pine to a depth of a quarter of an inch. Moisture conducts electricity.
Stick With Me
Drying pine at home is basically the same as at a mill. The object is to circulate air around and through it. For pine purchased at a lumberyard or home supply store, select a location inside a garage or shop. If you're drying green pine that you've milled, select a location outdoors on high ground with prevailing winds.
Time in a Bottle
Time required to dry pine is subjective to air flow and humidity. In a moist climate, green pine can take up to a year to dry to 19 percent. If you're drying milled pine for furniture, trim work or cabinets, the time required to bring it down to 12 percent can be as little as a few days or as long as a few weeks or more.
