[Solution] SOLIDWORKS Broken out Section
- Click Broken-out Section (Drawing toolbar), or click Insert > Drawing View > Broken-out Section.The pointer changes to .
- Sketch a profile.
- Set options in the Section View dialog box. If you do not want to exclude components or fasteners from the broken-out...
- Set options in the Broken-out Section PropertyManager.Use 3D drawing view mode to select an obscured edge for the depth...
- Click .
...
Broken-Out Section View on Section View
- In a section view, click Insert > Drawing View > Broken-out Section.
- Sketch a closed profile such as a spline.
- In the PropertyManager, set options.
- Click .
How to fix out of context parts in SolidWorks?
Rules for External References
- A component cannot have an external reference to itself (a circular reference).
- You cannot reference one instance of a part to create a feature on another instance of the same part, even if the instances are in different configurations.
- You cannot replace a part with another part created by deriving the second part from the first.
How do you do a partial section view in SolidWorks?
- In a drawing view, click on Part View (Drawing toolbar) or Insert > Drawing View > Part.
- Within the Part View PropertyManager, click on Part.
- In Chopping Line, choose Auto-start part view.
- Click on Vertical and transfer the slicing line to the placement and click on.
How to create title block in SolidWorks?
- Outer rectangle: Create a rectangle using the (0,0) point as a lower-left corner
- Inner rectangle
- Centering marks: Draw centering marks on each side of the inner rectangle using geometric entities.
How to add loft section in SolidWorks?
To delete a new loft section from a loft:
- Right click the loft icon in the FeatureManager design tree and select Edit Feature.
- In the PropertyManager, select the new sketch under Profiles and press Delete.
- Click . ...
- To permanently remove the loft section and the sketch from the model, do the following: . ...
How do I split a section view in Solidworks?
0:235:35SOLIDWORKS Tutorial - Custom Section Views - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe can go to view layout. Section view and we can pick over here on the left whether we want to doMoreWe can go to view layout. Section view and we can pick over here on the left whether we want to do vertical horizontal auxiliary or aligned just pick one. Pick where you want to go through the part.
How do you do a cutaway view in Solidworks?
To create a part cutaway view:In the part: Create a new configuration for the cutaway view. Cut the part as it should appear in the drawing view. ... In the drawing: Create a model view of the part using the configuration you made for the cutaway. Add cross hatching to the cut faces.
What is a broken section view?
A broken section is a cut-away view of the interior of a part. It is a section view displayed inside a 2D boundary where an existing view of the part has been cut away.
How do you break an isometric view in Solidworks?
Model Break Views Within DrawingsIn the Drawing View PropertyManager, under Reference Configuration, select Show in exploded or model break state.Right-click the drawing view and click Properties. In the dialog box, in Configuration information, select Show in exploded or model break state, and click OK.
What is the cutaway showing?
A cutaway drawing, also called a cutaway diagram is a 3D graphics, drawing, diagram and or illustration, in which surface elements of a three-dimensional model are selectively removed, to make internal features visible, but without sacrificing the outer context entirely.
How do I change the direction of sections in Solidworks?
Double-click anywhere along the section line, or select the section line and select Flip Direction in the Section View PropertyManager.
How do I create a section view in Solidworks assembly?
To create a section view:In a part or assembly document, click Section View. (View toolbar) or View > Display > Section View.In the Section View PropertyManager, under Section 1, set the properties.To section the model with additional planes or faces, select Section 2 and Section 3 and set the properties. ... Click .
Why is it the material is removed in broken-out section?
Material is removed to a specified depth to expose inner details. Specify the depth by setting a number or by selecting geometry in a drawing view. If you create a broken-out section of an exploded view, you cannot collapse the exploded view.
How do you crop a view in Solidworks?
To crop a view:In a drawing view, sketch a closed profile such as a circle.Click Crop View. (Drawing toolbar), or click Insert > Drawing View > Crop. The view outside the profile disappears. A circle is drawn on this Section View. After cropping, only the view inside the circle is displayed.
How do I create a detail view in Solidworks?
To create a detail view:Click Detail View. (Drawing toolbar), or click Insert > Drawing View > Detail.The Detail View PropertyManager appears and the Circle tool. is active.Sketch a circle. ... When the view is where you want it to be, click to place the view.